As Zephyr currently requires CMake version 3.20.0, update all
occurrences of cmake_minimum_required.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Replace calls to nrfx_gpiote functions deprecated in nrfx 2.6.0
with recommended equivalents.
On the occasion, switch to using available `nrfx_gppi_*` functions
instead of separate paths for DPPI and PPI channels.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The reserved memory mechanism (sections and regions definition) has been
entirely replaced, greatly extended and made it better by the work done
on the zephyr,memory-region compatible.
Since there is are no actual users, we can remove it.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This PR adds a soft off mode to the RT10xx Power Management API.
Additionally, it corrects the PM API function in rt10xx_power.c to
use the correct function prototype to be properly overridden.
Signed-off-by: Nickolas Lapp <nickolaslapp@gmail.com>
The lmp90100_evb sample included an implementation of double sqrt, and the
on_off_level_lighting_vnd_app sample included an implementation of float
sqrtf. Move that code into minimal libc instead of requiring applications
to hand-roll their own version.
Signed-off-by: Keith Packard <keithp@keithp.com>
This is the same fix as the one introduced in 49520eea57 ("samples: nrf:
system_off: Fix force state usage") for nRF boards. Quoting original
commit:
The sample cannot spin in an infinity loop because the idle thread
will not run and consequently the forced state will not be used.
Without this fix, the system doesn't enter SOFT_OFF state:
*** Booting Zephyr OS build zephyr-v3.0.0-3495-ga456c5274614 ***
cc1352r1_launchxl system off demo
Busy-wait 5 s
Sleep 2000 us (IDLE)
Sleep 3 s (STANDBY)
Entering system off (SHUTDOWN); press BUTTON1 to restart
ERROR: System off failed
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Remove ESP32 and ESP32S2 from not working samples
and tests. Reason for not working is not enough memory
space in RAM to execute it. This can be worked out as next steps.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Linker files were not migrated with the new <zephyr/...> prefix. Note
that the conversion has been scripted, refer to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all samples to the use
the new prefix <zephyr/...>. Note that the conversion has been scripted:
```python
from pathlib import Path
import re
EXTENSIONS = ("c", "h", "cpp", "rst")
for p in Path(".").glob("samples/**/*"):
if not p.is_file() or p.suffix and p.suffix[1:] not in EXTENSIONS:
continue
content = ""
with open(p) as f:
for line in f:
m = re.match(r"^(.*)#include <(.*)>(.*)$", line)
if (m and
not m.group(2).startswith("zephyr/") and
(Path(".") / "include" / "zephyr" / m.group(2)).exists()):
content += (
m.group(1) +
"#include <zephyr/" + m.group(2) +">" +
m.group(3) + "\n"
)
else:
content += line
with open(p, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to be consistent with what is possible in Devicetree, always
take a period in nanoseconds. Other scales or units may be specified by
using, e.g., the PWM_MSEC() macros (all of them converting down to
nanoseconds). This change then deletes the "_nsec" and "_usec" versions
of the pwm_set call.
Note that this change limits the period to UINT32_MAX nanoseconds,
~4.3s. PWM is, in generali, used with periods below the second so it
should not be a problem.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- add `channel-gpios` property with GPIO assignments for PWM channels
to `sw_pwm` nodes
- update PWM related macros to refer to channels instead of pins
- remove no longer needed inclusion of boards/arm/bbc_microbit/board.h
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Fix spelling errors in assorted .rst files. The errors were found
using a tool called 'codespell'.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic.sa@gmail.com>
The autoconf.h header is not required because the definitions present in
the file are exposed using the compiler `-imacros` flag.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This is a follow-up to commit cf6a58d3f6.
Restore the "nordic,nrf-ipc" compatible property in mbox nodes for both
nRF5340 cores and use it together with the new "nordic,mbox-nrf-ipc"
one. This way either the MBOX or the IPM driver can be used for these
nodes without further modifications. This eliminates the need to use
overlays in quite a few cases, so remove all those no longer needed
ones (which are also a bit confusing now as they refer to no longer
existing ipc@2a000 and ipc@41012000 nodes).
Restore also the ipc node label removed in the commit mentioned above,
as the label is used in validation of base addresses of nRF DT nodes.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Some names of the test cases are duplicated within the project.
This commit contains the proposed names of the test scenarios.
Signed-off-by: Katarzyna Giadla <katarzyna.giadla@nordicsemi.no>
Add a new callback structure for Bluetooth authentication
This struct is meant to replace the information-only
callbacks in bt_conn_auth_cb. The reason for this is that
due to the nature of bt_conn_auth_cb, it can only be registered
once. To allow mulitple users gain information about pairing
and bond deletions, this new struct is needed.
Samples, tests, etc. are updated to use the new struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The nrf52840dk_nrf52840 board has been ported to pinctrl, so there's no
need to keep duplicated definitions in the sample anymore.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Extend the macro with checks for DT properties related to pin
assignments that are defined but would be ignored, depending on
whether PINCTRL is enabled or not, what presumably indicates
a resulting configuration different from what the user expects.
Add also a possibility to indicate that the pinctrl-1 property
should not be checked because the caller does not support the
sleep state.
Rename the macro so that its name better reflects its function.
Update accordingly all drivers that use it.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The pm_constraint_* APIs were effectively used by the policy manager
only. This patch renames the API to the policy namespace and makes its
naming more explicit:
- pm_constraint_set -> pm_policy_state_lock_get()
- pm_constraint_release -> pm_policy_state_lock_put()
- pm_constraint_get -> pm_policy_state_lock_is_active()
The reason for these changes is that constraints can be of many types:
allow/disallow states, impose latency requirements, etc. The new naming
also makes explicit that the API calls will influence the PM policy
behavior.
All drivers and documentation have been updated accordingly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use NRF_DT_GPIOS_TO_PSEL() in calls to nRF GPIO HAL functions as they
need a psel value, a pin number combined with the corresponding GPIO
port number, not only the pin number as provided by DT_GPIO_PIN().
This way buttons connected to pins in the P1 port can also be handled
properly.
Replace also DT_NODELABEL(button0) with DT_ALIAS(sw0) for consistency
with other samples that use the standard button.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Reserve the upper 8 bits of gpio_dt_flags_t for SoC specific flags and
move the non-standard, hardware-specific GPIO devicetree flags (IO
voltage level, drive strength, debounce filter) from the generic
dt-bindings/gpio/gpio.h header to SoC specific dt-bindings headers.
Some of the SoC specific dt-bindings flags take up more bits than
necessary in order to retain backwards compatibility with the deprecated
GPIO flags. The width of these fields can be reduced/optimized once the
deprecated flags are removed.
Remove hardcoded use of GPIO_INT_DEBOUNCE in GPIO client drivers. This
flag can now be set in the devicetree for boards/SoCs with debounce
filter support. The SoC specific debounce flags have had the _INT part
of their name removed since these flag must be passed to
gpio_pin_configure(), not gpio_pin_interrupt_configure().
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add build assertions that will ensure that every peripheral for
which a driver instance is created has some pins assigned to it.
Neither pinctrl-0 nor *-pin properties can be currently marked as
required in devicetree, so these assertions will help users avoid
invalid configurations where it could be hard to figure out why
the UART is not working.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This sample application uses the STM32 USB TCPC Driver to create a USBC
Sink Application for the STM32G081b_eval board.
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
Kconfig options now belong to the Kconfig domain, therefore, the
:kconfig:option: role needs to be used.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The sample cannot spin in an infinity loop because the idle thread will
not run and consequently the forced state will not be used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add sample which demonstrates how RTC clocks are synchronized
between application and network core.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Various obsolote and misnamed platfomrs in test filters theat went
undetected for a while.
Fixes#41222
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a sample that can be used to see the nRF LED matrix display driver
in action and that will prove that the driver is buildable for both the
bbc_microbit_v2 and bbc_microbit boards.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
