New power states have more granularity than deep sleep and sleep
states. Just get rid of this and keep the same behavior for now.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
pm_system_resume_from_deep_sleep is not implemented or used
anywhere. Just remove it and keep the code base cleaner.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This function is useless and the state variable that it was
controlling is also not necessary because the same logic is being
handled by the variable post_ops_done.\
This reasonably simplifies idle thread logic.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
pm_power_state_force had two different behavior, if
CONFIG_PM_DIRECT_FORCE_MODE was enabled this function immediately
calls pm_system_suspend() without wait the idle thread. Without this
option enabled, this function will wait for the idle thread run but
will use the given power state instead of asking the policy manager.
The problem in both cases is that the process involves handling
devices and the way that was implemented if at least one device failed
to go to low power or suspended the system power state would not
change / be forced.
This commit simplifies this API removing the conditional behavior
since it is not clear the need for that and effectively, and
immediately, forces the system to go to the given state without
bother with devices.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
pm_system_suspend is called only from the idle thread and should
not be exported as a public API.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This structure contains a GPIO device, pin number, and devicetree
flags. Add helpers for getting one out of the devicetree and doing
useful initialization tasks with it.
Fixes: #31280
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Previously, a k_sem_reset with any outstanding waiting threads would
result in the semaphore in an inconsistent state, with more threads
waiting in the wait_q than the count would indicate.
Explicitly -EAGAIN any waiting threads upon k_sem_reset, to
ensure safety here.
Signed-off-by: James Harris <james.harris@intel.com>
Add SMP support.
Note: there is still limitation that we rely on NUM CPUs.
And all cpus must be from 0,1,2 and ....
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Currently there is no way to distinguish between a caller
explicitly asking for a semaphore with a limit that
happens to be `UINT_MAX` and a semaphore that just
has a limit "as large as possible".
Add `K_SEM_MAX_LIMIT`, currently defined to `UINT_MAX`, and akin
to `K_FOREVER` versus just passing some very large wait time.
In addition, the `k_sem_*` APIs were type-confused, where
the internal data structure was `uint32_t`, but the APIs took
and returned `unsigned int`. This changes the underlying data
structure to also use `unsigned int`, as changing the APIs
would be a (potentially) breaking change.
These changes are backwards-compatible, but it is strongly suggested
to take a quick scan for `k_sem_init` and `K_SEM_DEFINE` calls with
`UINT_MAX` (or `UINT32_MAX`) and replace them with `K_SEM_MAX_LIMIT`
where appropriate.
Signed-off-by: James Harris <james.harris@intel.com>
Its been 2 releases since we deprecated the old zephyr integer types.
We can now remove support for the Kconfig option, code, and, test to
allow the old int types to be supported.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add NET_HEXDUMP_DBG/ERR/WARN/INFO macros, then use them for new
MQTT_HEXDUMP_TRC/ERR/WARN/INFO macros.
Log struct mqtt_utf8 using MQTT_HEXDUMP_TRC. One cannot safely log
mqtt_utf8 strings due to no guarantee of a NULL terminator being
present. Also, logging without log_strdup() as if it were a NULL
terminated string asserts when CONFIG_LOG_IMMEDIATE=n. This solves
both issues.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
In applications like logging the call site where arguments to
formatting are available may not be suitable for performing the
formatting, e.g. when the output operation can sleep. Add API that
supports capturing data that may be transient into a buffer that can
be saved, and API that then produces the output later using the
packaged arguments.
[ Documentation and commit log from Peter Bigot. ]
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add Thalley (emil.gydesen@nordicsemi.no) and asbjornsabo
(asbjorn.sabo@nordicsemi.no) as additional maintainers/codeowners for
bluetooth audio.
(Also adds empty audio.h file, that will later be expanded, so that
the include/bluetooth/audio directory now listed in CODEOWNERS
actually exists.)
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Fixed some undesired or incorrect macros, which
can cause build error.
This is a resubmission of PR (#30086)
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
AArch64 has support for PSCI. This is especially useful for SMP because
PSCI is used to power on the secordary cores.
When the PSCI driver was introduced in Zephyr it was designed to rely on
a very PSCI-centric subsystem / interface.
There are two kinds of problems with this choice:
1. PSCI is only defined for the non-secure world and it is designed to
boot CPU cores into non-secure state (that means that PSCI is only
supposed to work if Zephyr is running in non-secure state)
2. There can be other ways or standards used to start / stop a core
different from PSCI
This patch is trying to fix the original wrong assumption by making the
interface / subsystem a generic one, called 'pm_cpu_ops', and using PSCI
only as an actual driver that is a user of this new interface /
subsystem.
For now the new subsystem is only exposing two methods: cpu_on and
cpu_off, others will probably follow according to the needs.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
There is no strict reason to use assembly for the reset routine. Move as
much code as possible to C code using the proper helpers.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Introduce C helpers for common assembly operations and preprocessor
constructors to create helper functions to read / write system
registers.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The name for registers and bit-field in the cpu.h file is incoherent and
messy. Refactor the whole file using the proper suffixes for bits,
shifts and masks.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
checkpatch misinterprets the macro that generates event data
structures as being code rather than more data. This code has not
been changed, but rearrangement of code around it causes a false
positive when the aggregate changes are checked for style.
Add an extra line to eliminate the warning.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Now that the old API has been reimplemented with the new API remove
the old implementation and its tests.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The new API cannot be used from userspace because it is not merely a
wrapper around existing userspace-capable objects (threads and
queues), but instead requires much more complex and lower-level access
to memory that can't be touched from userspace. The vast majority of
work queue users are operating from privileged mode, so there's little
motivation to go through the pain and complexity of converting all
functions to system calls.
Copy the necessary pieces of the existing userspace work queue API out
and expose them with new names and types:
* k_work_handler_t becomes k_work_user_handler_t
* k_work becomes k_work_user
* k_work_q becomes k_work_user_q
etc. Because the replacement API cannot use the same types new API
names are also introduced to make it more clear that the userspace
work queue API is a separate functionality.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit provides a complete reimplementation of the work queue
infrastructure intended to eliminate the race conditions and feature
gaps in the existing implementation.
Both bare and delayable work structures are supported. Items can be
submitted; delayable items can be scheduled for submission at a future
time. Items can be delayed, queued, and running all at the same time.
A running item can also be canceling.
The new implementation:
* replaces "pending" with "busy" which identifies the active states;
* supports canceling delayed and submitted items;
* prevents resubmission of a item being canceled until cancellation
completes;
* supports waiting for cancellation to complete;
* supports flushing a work item (waiting for the last submission to
complete without preventing resubmission);
* supports waiting for a queue to drain (only allows resubmission from
the work thread);
* supports stopping a work queue in conjunction with draining it;
* prevents handler-reentrancy during resubmission.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Attempts to reimplement the existing work API using a new work
implementation failed, primarily due to heavy use of whitebox testing
in validating the original API. Add a temporary Kconfig that will
select between the two implementations so we can use the same
identifiers but select which implementation they reference.
This commit just adds the selection infrastructure and uses it to
conditionalize the existing implementation in anticipation of the new
one in the next commit.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The work poll API is defined in terms of the k_work API. Shift a
structure definition around so it's not within the details of a
specific k_work API implementation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This lets an application detect when a PPP connection fails to establish
or terminates, so that the connection can be reattempted (for example,
by setting carrier off and on).
Signed-off-by: Jim Paris <jim@jim.sh>
Document the GATT APIs not waiting for TX context when being called
from the system workqueue context. This is because the TX contexts
are freed by the system workqueue so blocking would cause a deadlock.
The number of TX contexts are by default equal to the number of
TX buffers in the system. Since TX contexts is allocated after a buffer,
but freed from a lower priority than the buffer then there can be more
allocated TX contexts than TX buffers.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove the incorrect documentation note about the indication callback
being called from the system workqueue.
The callback will be called by the RX thread once the confirm indication
response has been received.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove unused symbols and related sections from the linker script. In
particular CONFIG_IS_BOOTLOADER and CONFIG_CODE_DATA_RELOCATION are not
currently supported on AArch64.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The compiler was inserting additional redundant loads in many
`sys_dlist_*` APIs, in case writes aliased with previous reads.
However, these additional reads are unnecessary, as the only cases
where the aliasing would matter would be a violation of the `dlist`
API contract (e.g. if node->next == node but node->prev != node).
This is decidedly a micro-optimization.
Signed-off-by: James Harris <james.harris@intel.com>
The funky order was necessary when registers were stored using a
sequence of `stp x(n), x(n+1), [sp, #-16]!`. Now that absolute offsets
are being used, we can restore natural ordering.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This introduces the support for CRC32C (Castagnoli) algorithm.
The generator polynomial used is 0x1EDC6F41UL.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
This functionality is is enabled by setting CONFIG_SHELL_GETOPT.
It is not active by default.
User can call following functions inside command handlers:
- shell_getopt - getopt function based on freebsd implementation
- shell_getopt_status_get - returns getopt status
Beware when getopt functionality is enabled shell will not parse
command handler to look for "-h" or "--help" options and print
help message automatically.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The most common secure monitor firmware in the ARM world is TF-A. The
current release allows up to 8 64-bit values to be returned from a
SMC64 call from AArch64 state.
Extend the number of possible return values from 4 to 8.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Instead of relying on hardcoded offset in the assembly code, introduce
the offset macros to make the code more clear.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Removed printk.h include from log_core.h.
Since LOG_PRINTK cannot be enabled with LOG_MINIMAL removed
support for both.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
We default to use the "label" properties of a devicetree node as the
name if it exists. If the "label" does not exist we than use the
node-name@unit-address for the node as the name.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
usb_hid_descriptor struct is only used internally and
is not intended to be used by the USB HID device application.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add common HID definitions header and move common macros
from USB HID header to common HID header.
The header can thus be used by Bluetooth HID profile or
others independently of USB subsystem.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The MT_OVERWRITE case is much more common. Redefine that flag as
MT_NO_OVERWRITE instead for those fewer cases where it is needed.
One such case is platform provided mappings. Apply them after the
common kernel mappings and use the MT_NO_OVERWRITE on them.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
There is no real reason for keeping page tables into separate pools.
Make it global which allows for more efficient memory usage and
simplifies the code.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Introduce a remove_map() to ... remove a mapping.
Add a use count to the page table pool so pages can be dynamically
allocated, deallocated and reused.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
