Remove the unnecessary video-controls header included in video.h.
Drivers, applications should explicitly include it when needed.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The mcux_acmp will get support by the comparator subsystem. To avoid
namespace clashes, namespace the driver, kconfigs and use the
MCUX_ACMP config solely to select the MCUX SDK driver.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
ZBus currently does not have a `HEAP_MEM_POOL_ADD_SIZE_ZBUS` when using
message subscribers or runtime observers, forcing the developer to set that
manually. Adding the configuration option to zbus would improve its
usability and make zbus easier to use. With this feature, zbus aligns with
the other Zephyr subsystems' heap memory allocation approach.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
Make the blinking and fading parameters adjustable so that samples
can be run on devices that support only short periods.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Introduce BT_CTLR_PERIPHERAL_ISO_RESERVE_MAX Kconfig option
so that disabling this option will use minimum time
reservation and exercise the peripheral ISO connection event
continuation using is_abort_cb mechanism.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Introduce BT_CTLR_PERIPHERAL_RESERVE_MAX Kconfig option so
that disabling this option will use minimum time reservation
and exercise the peripheral connection event continuation
using is_abort_cb mechanism.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The sample is supposed to help examine the issues with touchscreen.
It draws a plus in last touched position.
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Remove the `work_q` parameter from `NET_SOCKET_SERVICE_SYNC_DEFINE` and
`NET_SOCKET_SERVICE_SYNC_DEFINE_STATIC` as this feature was dropped
during review but the removal was not 100% complete.
Signed-off-by: Jordan Yates <jordan@embeint.com>
IPv6 MLD API was so far defined in an internal header. This does not
seem correct though, as application code should be able to join/leave
multicast groups, hence the API should be exposed in a public header,
just as it is done for its IPv4 countepart - IGMP.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The sample uses net_config library, so there's no need for the sample to
configure unicast IP addresses manually.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Refactor the code to comply with:
Violation to rule 5.7 (Tag name should be unique) tag: data
Rename the structure to avoid excessive refactoring.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Building the sample with IPv4 only gives the following warning:
tcp.c:99:37: warning: array subscript 'struct sockaddr[0]' is partly
outside array bounds of 'struct sockaddr_in[1]' [-Warray-bounds]
data->tcp.sock = socket(addr->sa_family, SOCK_STREAM, IPPROTO_TCP);
This doesn't really seem like a valid one, but to get rid of it
workaround by specifying address family explicitly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The host-based adv auto-resume function has both a problematic
implementation and disagreement in the community around how it should
behave. See the issue linked resolved below for details.
This patch makes the deprecation visible to the user. The user will be
better served by a auto-resume tailored their applications use case,
based on more primitive host API like `conn_cb.recycled`, which has
obvious behavior that is unlikely to change.
Resolves: https://github.com/zephyrproject-rtos/zephyr/issues/72567
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Disable CDC ACM logging in the configuration overlays used to select the
CDC ACM UART as the shell backend.
The build warning was introduced by the commit e8c4867806
("usb: cdc_acm: disable logging if used for shell with logging")
to prevent recursive logging when using the CDC ACM UART as shell or
logging backend
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add a sample to demonstrate use of persistent keys in the PSA Crypto API.
The implementation of the PSA ITS API that allows storage of persistent
keys is provided either by the just-introduced secure storage subsystem
or by TF-M.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Add a sample to demonstrate direct use of the PSA ITS API.
The implementation of the API is provided either by the just-introduced
secure storage subsystem or by TF-M.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The sample currently doesn't build for non-secure nRF platforms due to
mbed TLS misconfiguration - TFM enforces PSA crypto API, while the
default configuration for supplicant uses legacy crypto configuration.
In result, build fails due to unsatisfied dependencies. Therefore,
disable this variant from building temporarily to unblock the CI, until
the issue is resolved.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The QoS structure is not related to a codec, but rather a
stream, and should thus not use the "Codec" name.
The BAP and ASCS specs refer to the QoS as
"QoS configuration" several places, so it is an obvious
choice for a name.
Since the structure is defined and used by BAP, the prefix
was changed from bt_audio to bt_bap.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use the CMake variable for iterable section's subalignment instead of a
global defined macro.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
MAX32662EVKIT board has CFAF128128B1-0145T display which
is 128x128 graphic display.
This commit enable mpi dbi display support with LVGL graphic library.
Pin connection of display is 3wire mode
SRAM size increased to be fit with lvgl example.
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Add the dts and config overlay for the two boards in order
to have the openamp_rsc_table sample working on
HiFi4 DSP from i.MX8QM and i.MX8QXP.
Since these two are similar, use a snippet.
Therefore, to compile the sample we use:
west build -p -b imx8qm_mek/mimx8qm6/adsp -S nxp-openamp-imx8-adsp
-s samples/subsys/ipc/openamp_rsc_table/
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
strncasecmp()'s prototype is provided in strings.h
let's include it to avoid a build warning.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Several samples used K_FOREVER when allocating buffers in the
system workqueue thread, which is prohibited.
The samples should rather retry later if TX fails.
This is not the ideal solution for the samples, but
fixes a bug. Ideally the samples would use a dedicated thread
to handle TX, instead of the system workqueue.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Due to the update of function bt_br_discovery_start,
register discovery callback by calling
bt_br_discovery_cb_register.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
A virtual metal_device is created, next the needed IO regions are created
and added to this device. Immediately we extract these regions back out
and make use of them. There is no reason to create the metal_device and
add the IO regions to it, instead simply use the IO regions directly.
This is similar to what was already done to the openamp_rsc_table sample.
Signed-off-by: Andrew Davis <afd@ti.com>
This is in preparation for adding another SoC where qemu_xtensa
is no longer valid choice. So use qemu_xtensa/dc233c as it is
the same as the old qemu_xtensa.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Upgrade to accel_polling sample application to support
RTIO streaming functionality. This mode is enabled when
CONFIG_SENSOR_ASYNC_API is defined. NUM_SENSORS must be
set to the correct number of sensors used.
Signed-off-by: Vladislav Pejic <vladislav.pejic@orioninc.com>
Enable kernel dynamic object allocation.
Otherwise the following error is printed:
E: 0xa138 is not a valid sample driver
E: address is not a known kernel object
E: syscall z_vrfy_sample_driver_state_set failed check: access denied
E: couldn't start driver interrupts
Signed-off-by: Marek Slowinski <mslowinski@antmicro.com>
Signed-off-by: Mateusz Hołenko <mholenko@antmicro.com>
Make sure that CONFIG_ZVFS_OPEN_MAX in the tests and samples is at
least the same value as CONFIG_NET_SOCKETS_POLL_MAX so that we
cannot have more polled sockets than there are available file
descriptors.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Adds custom overlay and config allowing the fs_sample to run on
the stm32f746g_disco with DMA enabled.
Signed-off-by: Maciej Sobkowski <msobkowski@antmicro.com>
