Add `west bindesc get_offset` command to print the offset of
the descriptors inside the given image.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Prior to this fix the descriptors end tag was placed in the binary
using LONG. This was wrong because the tag is of type short, and
the size of the descriptor (0), should have also been placed.
It so happened that on little endian machines the incorrect linker
script yielded correct results, as the extra zeros added to make
the value a long ended up as the correct byte sequence
(FF FF 00 00). On big endian machines however, the wrong sequence
is generated (00 00 FF FF).
This patch correct this issue.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Change adds a release note informing about the newly introduced Kconfig
option for Bluetooth stack.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Apply selection from the hash URL *after* having sorted the vendors
alphabetically.
Remove the initial call to updateBoardCount() as it is useless to
have one this early.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fix a regression introduced at the last minute when cleaning up
the stylesheet. The rule as it was made no sense.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add entyr mentioning the deprecation of the nxp, prefixed properties
in the nxp,kinetis-acmp dts binding.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Clarify that the actual calls to these backend functions are made
from `settings_save_subtree()`, which is called by `settings_save()`
or can be used directly.
Signed-off-by: Nerijus Bendžiūnas <nerijus.bendziunas@astrolightspace.com>
The timeout state is local and can block new ATT operations, but does
not affect the remote side. Disconnecting the GATT connection upon ATT
timeout simplifies error handling for developers. This reduces rare
failure conditions to a common one, without needing special cases for
ATT timeouts.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commit adds support for generating an interactive catalog of all
the supported boards that can be included in the documentation using
the `.. zephyr:board-catalog::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
If the `divider-int-0` or variations of these for each channel properties
are not specified, or if these is 0,
the driver dynamically configures the division ratio by specified cycles.
The driver will operate at the specified division ratio if a non-zero
value is specified for `divider-int-0`.
This is unchanged from previous behavior.
Please specify ``divider-int-0`` explicitly to make the same behavior as
before.
In addition, the default device tree properties related to the division
ratio have been removed.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
This adds zephyr,touch property to boards with touch controllers, analogous
to `zephyr,display`.
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Remove the `work_q` parameter from `NET_SOCKET_SERVICE_SYNC_DEFINE` and
`NET_SOCKET_SERVICE_SYNC_DEFINE_STATIC` as this feature was dropped
during review but the removal was not 100% complete.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Modify the BAP unicast client callback structure to be a
linked list. The purpose of this is to have multiple listeners
of the unicast client changes and notifications.
This is needed for the CAP initiatior.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update JWT subsystem documentation concerning the changes related
to:
- default library used
- new Kconfigs added
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Adds a signing page under build, which contains information on
how to sign images from the build system, this removes the old
details for using west sign with imgtool from the west sign page
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The host-based adv auto-resume function has both a problematic
implementation and disagreement in the community around how it should
behave. See the issue linked resolved below for details.
This patch makes the deprecation visible to the user. The user will be
better served by a auto-resume tailored their applications use case,
based on more primitive host API like `conn_cb.recycled`, which has
obvious behavior that is unlikely to change.
Resolves: https://github.com/zephyrproject-rtos/zephyr/issues/72567
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Update the migration guide to indicate that the STM32 ADC that selects an
asynchronous clock also need to set a domain clock.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
It includes both the high-level documentation of the subsystem and
that of APIs defined in code (PSA Secure Storage and internal APIs of
the subsystem).
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The QoS structure is not related to a codec, but rather a
stream, and should thus not use the "Codec" name.
The BAP and ASCS specs refer to the QoS as
"QoS configuration" several places, so it is an obvious
choice for a name.
Since the structure is defined and used by BAP, the prefix
was changed from bt_audio to bt_bap.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add missing entry to the documentation to also support CMake linker
generator with CoAP services.
Update hard coded value with linker script defined value.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This commit introduces architecture-specific ELF relocations for RISC-V,
in accordance with the RISC-V PSABI specification:
https://github.com/riscv-non-isa/riscv-elf-psabi-doc/blob/master/riscv-elf.adoc
Also, the necessary compiler configurations for compiling LLEXT
extensions on RISC-V are added, and the llext tests are executed on
RISC-V targets.
Calling llext extensions from user threads in RISC-V is still
unsupported as of this commit.
Signed-off-by: Eric Ackermann <eric.ackermann@cispa.de>
The TBS and GTBS shall now be registered at runtime and can
no longer be registered statically. This requires a change in
the applications using this.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When generating the documentation pages for the devicetree bindings, add
a link to the .c file implementing the corresponding driver, or folder
likely to contain the driver implementation, using heuristics to
determine the most likely location of the driver sources.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds the `bt_mesh_brg_cfg` prefix to the public Subnet Bridge API, and
aligns the function and callback naming with the rest of the Bluetooth
Mesh API.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
In general, it mirrors what is described in Interrupt-driven API
documentation, but here a little more explicitly and with a simplified
example, so that we can finally chisel it into the stone.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
`DT_..._REG_ADDR` macros do not always return an unsigned value. This
commit adds and unsigned 32bit prefix to ensure the value is always
unsigned.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This is in preparation for adding another SoC where qemu_xtensa
is no longer valid choice. So use qemu_xtensa/dc233c as it is
the same as the old qemu_xtensa.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Update the documented value range that `uart_irq_tx_ready` returns in
order to provide more information to the callers about the number of
bytes that could be writted with `uart_fifo_fill` without fragmentation.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Fixes issue #78815
Specifies explicitly the location of the generated .config file
relative to the build directory.
Signed-off-by: Arrel Neumiller <rlneumiller@gmail.com>
