Update the Object Transfer Client to use OTS defines and types instead
of the ones left over from the previous "le-audio local" object
transfer service:
DIR_LIST, object ID size, OACP and OLCP
Remove the no longer used defines and types from the OTC header file.
Exception: The OLCP sort order defines have not been removed, but
moved to the olcp internal header file, for expected later use.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Introduces new kconfig option CONFIG_BT_DEVICE_APPEARANCE_DYNAMIC.
New API `bt_set_apperance` allows dynamic setting of apperance. The
dynamic setting is saved in the settings subsys. `bt_set_apperance` is
analogous to `bt_set_name`.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
The this change is a step towards make the GAP appearance runtime
settable and ATT writable.
The new function bt_get_appearance() wraps CONFIG_BT_DEVICE_APPEARANCE
and should replace all its uses in code.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Guards the `recv` callback for just unicast and broadcast sink
builds, and removes the usage of it in broadcast_source.c
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The callbacks were implemented to notify the application
about the state of the ISO. However, since then, callbacks
such as `started` and `stopped` have been implemented,
and as such the `connected` and `disconnected` callbacks
no longer server any purpose.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add `ing` to the `BT_L2CAP_CONNECT` and `BT_L2CAP_DISCONNECT`
states, so that the name better matches the actual state.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
As use for simple message with no-segment send or receive.
This will be useful for ram-resource-constrained device.
such as bbc-microbit-v1.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Before this change, enabling CONFIG_BT_SETTINGS and calling
settings_load(), but delaying / not calling bt_enable would trigger an
assertion error due to a timeout. The fault is that the settings load
handler for the Bluetooth host assumes bt_enable has already been called
and sends HCI commands to the controller. This times out if HCI is not
running.
The fix is to skip loading Bluetooth settings before bt_enable. The doc
is updated to guide the user on how to enable Bluetooth after settings
have been loaded before.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Avoids copying the address and assigning the SID if the
PA list is used, as the values are ignored by the
controller, and thus there is no reason to copy
or assign the values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Tests that when a collision happens, the connection attempt is retried
and that it succeeds.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
The BT_BUF_ISO_SIZE macro was using BT_HCI_ISO_DATA_HDR_SIZE
which does not account for the optional timestamp value in
the header. Changed to use BT_HCI_ISO_TS_DATA_HDR_SIZE.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The skip field in the bt_le_per_adv_sync_param structure did not
document the acceptable range. Add it, directly from the
specification.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Document the deadlock avoidance in ATT request queueing.
Add more precise description of the callback and how long the argument
must be kept valid for.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Added new LE Feature Support bit mask as documented in
Bluetooth Spec. v5.3 Vol 6, Part B, Section 4.6 Feature
Support.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for the BAP broadcast sink role. This role
allows a device to sync to a broadcast ISO stream.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the Basic Audio Profile (BAP) unicast server
functionality. This allows a device to act as the
unicast server role, which can accept unicast streams
initiated by a unicast client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Periodic advertising synchronization create had a timeout set
to fixed value of 10 seconds. BT 5.3 Core specification defines
synchronization timeout as 6 consecutive periodic advertising
events. When advertiser set the periodic interval to be more than
1.6 second it was possible the application timeout is reached
before time allowed by BT Core specification.
Changed implementation of timeout to depend on the periodic
advertising interval.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
There were no handling of HCI_LE_CTE_Request_Failed event.
The commit adds missing implementation. An application will
be notified about failed request by cte_report_cb. It is the
same callback that is used for reporting collected CTE IQ
samples. The same callback was used to avoid creation new callback.
To give an application possibility to distinguish between regular
IQ samples report and request failed additional member err was added
to bf_df_conn_iq_samples_report structure.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
CTE request control procedure may failed due to rejection by
peer device or due to receive of LL_CTE_RSP PDU without CTE.
These events has to be reported to host by HCI_LE_CTE_Request_Failed.
The commit adds missing functionalit.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Request interval is a number of connection events that
is used to periodically run CTE request control procedure.
BT 5.3 Core Specification defines it as 2 octets long.
It had wrong type uint8_t. Changed to correct one uint16_t.
The commit also changes type of cte_rsp_en field of lll_df_conn_tx_cfg
to state that it is a boolean flag.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The application may want to want the type of an
ISO channel, and take action based on what the type is.
It has been implemented as a get_info to be
consistent with other get_info functions in the
Bluetooth subsystem.
The bt_iso_info struct can be expanded with more information
later as required.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Merges bt_csis_client_discover and
bt_csis_client_discover_sets, as they should be done
together for the discovery procedure from the CSIP
spec.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename struct bt_csis_client_set to
struct bt_csis_client_csis_inst, as that is more descriptive
of the actual content of the struct.
This also avoids the confusion about what a "set" is,
which is clearly not a single instance of CSIS
on a single remote server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Several APIs worked on the bt_csis_client_set struct,
which not only included information about a set, but
also a reference to a specific CSIS instance.
A specialized struct only for the set information
is more useful in those scenarios.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify bt_csis_client_get_lock_state to be the Ordered Access
procedure, which means that instead of reading a single lock value
on a single device, it will read the lock value for all
set members supplied in the function, and return true if any
of them is locked, or false otherwise.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename bt_csis_client_lock_get to
bt_csis_client_get_lock_state. `get` could be
misunderstood as acquire, i.e. that `get` would
mean that the lock was taken by this device.
The new name should make it more obviously that it
is just a read procedure.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove the addr struct from bt_csis_client_set_member as that
was only used by the upper layers and not the CSIS client
itself, and as such should only reside in the
upper layers.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change how the SIRK is exposed to the upper layers.
The SIRK will always be the unencrypted 16 octet
SIRK now, instead of a struct.
This not only allows us to avoid having a
__packed struct in the API, but also gives a better
API as we don't expose encrypted data to the upper layers.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove the error code BT_CSIS_ERROR_SIRK_ACCESS_REJECTED
as it no longer exists in the specification.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Refactor the bt_csis_client_lock_get function to use a
pointer to a member and a set instead of a bt_conn
pointer and an index.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Refactor the bt_csis_client_lock_read_cb callback to use
a bt_csis_client_set pointer instead of conn and index.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Refactor bt_csis_client_discover_sets to use the
bt_csis_client_set_member struct instead of a bt_conn.
The bt_csis_client_set_member represents a remote server
(set member), and make it possible to avoid sending indexes
of instances around instead of bt_csis.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove the lock and release sets functions, as well
as the discover member function as they have been removed
from the implementation a while ago.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
