bt_uuid_str expects UUID in little endian while UUID encoded into
unprovisioned mesh beacon is encoded in big endian. sys_memcpy_swap will
change endianess of uuid so that bt_uuid_str can be used.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
CONFIG_BT_MESH_PROV_DEVICE_LOG_LEVEL_INF may not be present while
CONFIG_BT_MESH_PROV_DEVICE_LOG_LEVEL is always present.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
When calling the `terminate_call` the `inst` would always be NULL
as we had just terminated the call that we attempted to look up.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
BlueZ stack in Linux distributions use disable all
advertising sets when advertising is turned off.
Add missing implementation to support disabling all
active advertising sets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rework internal header files to not have includes, rather
have the required includes in the c source files.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In order to have clean, self-contained HCI headers that do not have any
dependencies towards the Host or any other part of the system (except
types), reorganize the headers in the following way:
- Split out the macros and structs from hci.h to a new hci_types.h
- Merge the existing hci_err.h into the new hci_types.h
Fixes#58214.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add function to cancel any current proecedure. This is useful
in cases where the connection to one or more acceptors is lost
or if some acceptor does not respond to our requests for whatever
reason.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
An ASCS endpoint may go into either the idle or codec configured
state when a stream is released. However since we have such a high
coupling between audio streams and endpoints, we need to consider
the endpoint as having been released (i.e. gone to the IDLE state).
This is handled by a boolean state variable for now, but we may
want to consider a more generic approach where streams and
endpoints may be less coupled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When an audio stream in a bidirectional CIS is released,
it should not disconnect the CIS if there is still a stream
for the opposite direction streaming. Only if both streams
are not in a streaming state, should ASCS attempt to disconnect
the CIS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Log status values in events as hex instead of decimal
to make it easier to compare to the spec and hci_err.h
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When a device disconnects we previously just unref'ed it and
set default_conn = NULL. However, if we are connected to mulitple
devices, it makes sense to set the default_conn to one of the
other connections.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify the implementation of parse_search to use a
net_buf_simple and bt_data_parse to parse the LTV
search structure.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Set the secondary advertising PHY to a valid value when using
legacy advertising through the LE Set Extended Advertising Parameters
command.
Fixes#57885.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
As the coarse tick of ACL prepare and CIG prepare jitter by
+/- 1 tick, hence when initially scheduling the CIG place it
with enough margin so that cis_offset_min calculated when
there already exists a CIG can be larger than peer's
cis_offset_min being negotiated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrectly stored Broadcast ISO interval in
microseconds instead of storing in 1.25 ms units.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Introduce a Kconfig BT_CTLR_ISOAL_SN_STRICT to relax the Tx
ISO Data SDUs being dropped due to strict check of sequence
numbers in ISOAL, i.e. dropped when ISO Data SDUs are
delayed from upper layer with respect to the current
payload number in the ISO radio events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
block_size_log can be 0x20 which will shift 1 by 32 bits which will
cause undefined behavior. Adding ULL to 1 is an option but this will add
little bit more code when debug option is enabled. So simply print the
logarithmic value.
Coverity-ID: 316387
Fixes#58951
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
GATT server was not doing enough check before udpating the CCC.
For example, a non-bonded client could update the CCC of a bonded client
by spoofing his address.
This fix the issue by dissociating the CCC configuration of a bonded and
a non-bonded peer. To do that, a new field is added to the CCC config:
`link_encrypted`.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
In PR (#58723) has introduce another bug, that,
the flag ADV_FLAG_PROXY set before actually enabled.
When ctx:: BT RX call schedule_send will atomic_test_and_clear
ADV_FLAG_PROXY, but at this time, the proxy advertising will
not at advertising state, maybe in update params or set adverting
data phase,
so that, call bt_le_ext_adv_stop will nothing, and then call
k_work_reschedule --> send_pending_adv(at this time, the proxy
advertising actually enabled, but the upper layer clear proxy flags),
cause latest advertising unable start, because unable in advertising
state to update params(-EINVAL).
Fixes: #58721
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
As long as we do not have NVS support in TBS, the subscriptions shall be
removed once ACL is disconnected to avoid potential crash on
reconnection, as the subscription parameters might be not valid anymore.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes repeated attempt to bt_tbs_client_discover that failed
because srv_inst->current_inst was not cleared during previous discovery
process. The issue seen in case the GATT Read CCID returned an error.
The code has been factored out to separate helper function.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes missing guard access to GATT read parameters.
The code checks `busy` flag and returns an error in case there's ongoing
GATT Read operation already.
Fixes: #58425
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
-- Implemented reporting of lost / missing SDUs for framed PDUs. This
should result in SDUs being released when only framed padding PDUs or
error PDUs are received.
-- Removed unused configuration params structure, storage and linked
APIs.
-- Reduced default logging level to INF instead of DBG.
-- Included debug logging messaged for framed consumption.
-- Removed separate latency_unframed and latency_framed and replaced
with a common sdu_sync_const as they are mutually exclusive for each
sink.
-- Restricted framed time stamp calculation only to situations where all
dependent information is available.
-- Corrected SDU sequence numbering to release starting at zero.
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Based on interpretation of Clarification Errata ES-22876 Request for
Clarification - Recombination actions when only padding unframed PDUs
are received, it was decided that an SDU should be released as "Missing"
when only padding PDUs are received for any SDU.
- https://bluetooth.atlassian.net/browse/ES-22876
This change will also assist streaming in the Common Central design
where the central was found to send only padding PDUs before streaming
starts.
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
If the num_ase == 0xff then it is a special case that needs to be
handled like if num_ase == 0x01.
If there is an error with ase_id = 0x00 then the error cannot
be translated to a specific stream, so the callbacks may now get
NULL for the stream object.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When CCC or CF store on write is disabled and the other one is enabled,
leading to the delayed store being enabled. This cause the value of the
corresponding `n` selected option to not be stored at all.
To fix this, the checks to know if we need to store the CCC or the CF,
happening at the disconnection, are now ensuring that the CCC or the CF
are stored even if the one of them does not enable store on write.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Remove the lower check (BT_BAP_BASS_OP_SCAN_STOP) in
BT_BAP_BASS_VALID_OPCODE as it is always used on unsigned
variables, so no point in check if it is lower than 0.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add check for the index in the function itself, as well as where
we call it internally, to ensure that we do not attempt to access
invalid indexes of broadcast_assistant.recv_state_handles.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This fixes missing `CONFIG_*` prefix.
The `BT_HAS_PRESET_CONTROL_POINT_NOTIFIABLE` option is already guarded
with `BT_HAS_PRESET_SUPPORT`, so it has been removed from `depends on`
condition.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes regression causing compilation errors seen when the
code is built without preset support (BT_HAS_PRESET_COUNT = 0).
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Added assert when looking up the next instance, as the caller of this
function should ensure that the index is correct before calling
discover_next_instance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If the minimal value of an IN_RANGE is 0, then it is
a useless check, and the cases have been modified to
not use IN_RANGE. This also fixes some coverity issues.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The check was a && but should have been an ||. Fixed by moving
the check to a new if statement.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When notify_app is called for BT_TBS_CALL_OPCODE_TERMINATE
we did a lookup on the call index, but never did a NULL check
before dereferecing it.
This does not fix the issue that the instance will always
be NULL in this case, as we have terminated the call so
we cannot possibly look up the call afterwards.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The friendly copy always assumed that the friendly name could
fit in memory, which could cause overflows. Fixed by using
utf8_lcpy as that not only ensures that the copy is truncated
to fit in memory, but also ensures that it is null terminated
and truncated in a way that supports multi-byte UTF8 characters.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The previous implementation would read from `addr->val[0]` before it was
initialized if the input string started with a colon ':'.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
If offset is only 32-bit, then it can never be > UINT32_MAX,
so added another conditional that only if the type (off_t) is
larger than 32-bit, we perform the maximum value check.
off_t is not a standard type and thus the size of it is poorly
defined, and are just defined as a signed integer type.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The check compared the levels against < BT_IAS_ALERT_LVL_NO_ALERT
which of course does not make sense given than the lvl_u8 is an
unsigned value that can never be < BT_IAS_ALERT_LVL_NO_ALERT.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use unsigned long long and shell_strtoull to get the ID of
OTS objects, as unsigned long may not be able to store all 48
bits.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
