running samples/net/cloud/mqtt_azure in QEMU with default
configuration crashes with exception. This PR change doubles
the default workqueue stack size in a attempt to fix the issue
reported in: GH#58930.
Signed-off-by: Andrei Hutanu <andrei.hutanu.i@gmail.com>
Increase RAM requirements for some test, we have many exotic platforms
failing to link due to the size of the test.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Add integration_platforms to avoid excessive filtering
- Make sure integration platforms are actually part of the filter
- Fix some tags and test meta data
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The default transport latency was not valid.
Set it to a value that is large enough.
The minimum possible transport latency is 16580 us,
but this assumes the controller ignores the RTN=2.
If the controller uses the RTN=2, the transport latency will
be slightly larger than 30 ms depending on
how the controller chooses to setup the ISO link.
Therefore, we set it to 40 ms to ensure the default
configuration is valid.
How these numbers were found:
For unframed PDUs this is defined in Core_v5.4, Vol 6,
Part G, Section 3.2.2:
Transport_Latency =
CIG_Sync_Delay + FT * ISO_Interval - SDU_Interval
Because unframed PDUs are being used, the ISO interval needs
to be a multiple of SDU interval.
If MaxPDU = MaxSDU and the PHY is 2M, this results in that
the maximum subevent size is:
2120 * 2 + 2 * 150 = 4540.
For 2 CISes this is 9080 us > 7500
Therefore, the controller has to set the ISO interval to a
minimum of 15000 us in order to fit the packets.
Based upon this info, the controller has the freedom to ignore
or use the requested RTN=2.
1. Ignore -> NSE is 2: Minimum ISO interval is 15000 us
2. RTN = 2, Increase NSE: 4 * 4540 = 18160 -> ISO_Interval = 22500 us
3. RTN = 2, Increase the FT to 2, NSE = 2 -> ISO_Interval = 15000 us
For (1):
Transport_Latency = CIG_Sync_Delay + 15000 - 7500
= CIG_Sync_Delay + 7500
For (2):
Transport_Latency = CIG_Sync_Delay + 22500 - 7500
= CIG_Sync_Delay + 15000
For (3):
Transport_Latency = CIG_Sync_Delay + 2 * 15000 - 7500
= CIG_Sync_Delay + 22500
As shown in Core_v5.4, Vol 6, Part B, Section 4.5.14,
CIG_Sync_Delay needs to be larger than or equal to the length of
all ISO events. That is, the sum of the subevents:
For (1): CIG_Sync_Delay = 2 * 4540 = 9080
For (2): CIG_Sync_Delay = 4 * 4540 = 18160
For (3): CIG_Sync_Delay = 2 * 4540 = 9080
This results in the following transport latencies:
For (1): Transport_Latency = 9080 + 7500 = 16580
For (2): Transport_Latency = 18160 + 15000 = 33160
For (3): Transport_Latency = 9080 + 22500 = 31580
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
It is not intentional to continue advertising once a connection has been
established for two reasons:
1. We do not configure enough connection contexts for this
2. We don't want to generate controller scheduling conflicts that can
possibly reduce performance.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
BlueZ btusb does not recognize hci_usb sample as Bluetooth
Controller when CDC ACM is enabled in the sample.
Refer to https://github.com/zephyrproject-rtos/zephyr/issues/29107
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add the '.buffered' field to the dac_channel_cfg structure
when testing the DAC.
This boolean parameter is initialised to 'true' to PASS the test.
It follows the https://github.com/zephyrproject-rtos/zephyr/pull/57730
Also changed for the samples/drivers/dac
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fix Tx ISO Data packet sequence number increment based on
the send timer timeout value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Relax Tx ISO SDUs being dropped in unicast audio client and
server samples when using the Zephyr Bluetooth Low Energy
Controller, i.e. Tx ISO SDUs dropped due to delayed ISO data
send calls in upper layer with respect to payload number in
the current ISO radio events in the Controller.
This option is disabled in the sample and users can use it
when need be.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add Zephyr Bluetooth Low Energy Controller overlay config for
the unicast audio client and server samples.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Only print incoming data when the data is valid. Otherwise we also
print incoming data when no data was received.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
PECI bus sample requires a controller and a target
Intel system(PECI controller) + Embedded controller(PECI target),
where EC HW can be add-on card (mec172xmodular) or onboard EC.
MEC172x EVB is not intended to be connected hence excluding
the platform.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Remove usage of Kconfig symbol `CONFIG_BT_DEBUG_LOG` from samples. It
has been deprecated since this PR:
https://github.com/zephyrproject-rtos/zephyr/pull/56183
The Kconfig symbols has been replaced by `CONFIG_LOG=y` on most of the
cases. Or it has been removed when not needed anymore.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Mass storage sample contains separate Kconfig options for RAM, Flash and
SDMMC disk drivers. All disk drivers can be enabled simultaneously and
therefore the maximum number of concurrent LUNs is 3.
Configure Mass Storage class maximum LUNs to 3 to solve initialization
failures on targets that enable more than one disk driver at a time.
Each additional supported LUN increases the Mass Storage class memory
usage by 48 bytes (struct scsi_ctx) on 32-bit targets. Allocating 3 SCSI
context structures allows the sample to work regardless what disk
drivers are concurrently enabled.
Fixes: #57657
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
This fixes regression causing compilation errors seen when the
code is built without preset support (BT_HAS_PRESET_COUNT = 0).
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
send_simple_coap_request needs to return a result from previous functions
instead of success at the end of the function. Without doing so the example
may wait for a response from a coap sever when a message failed to send.
Signed-off-by: Matthew Bradbury <matt-bradbury@live.co.uk>
Added waiting for prompt instead of calling time.sleep,
to fix issue with longer setting up platforms with TF-M
enabled. Wrapped iter_stdout generator, to avoid issues
when generator is created and called multiple times
in test scenarios.
Fixes: #58747
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
All those benchmarks are kernel related, so add the kernel tag to avoid
building them when non kernel changes are being submitted.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enable the send timer only when at least one ASE source is enabled,
CONFIG_BT_ASCS_ASE_SRC_COUNT > 0 in case of unicast_audio_server,
CONFIG_BT_BAP_UNICAST_CLIENT_ASE_SRC_COUNT > 0 for unicast_audio_client.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
With Zephyr now always using `int main(void)`, there's no longer any need
for this definition. The last remaining use which gated the declaration of
_posix_zephyr_main isn't necessary as adding that declaration
unconditionally is harmless.
Signed-off-by: Keith Packard <keithp@keithp.com>
Use phase shift between the emulated A and B signals equal to the half
of the used period instead of a fixed 1 millisecond, to not enforce
decoders to use relatively frequent sampling just to make use of this
emulation.
Add also a few missing `static` keywords.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This PR relocates the sensor trigger sample application from the
`sensor_shell` sample to a subcommand in the actual sensor shell. The
subcommand has a UI for enabling a given trigger on a given sensor.
A built-in handler for the data_ready trigger is included that prints
the latest data to the log. Currently, only `SENSOR_TRIG_DATA_READY` is
supported but the groundwork is there to add others. Tested on a
`tdk_robokit1` board.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
Adds a simple auxdisplay sample which outputs hello world and the
name of the board. A sample overlay is provided for the
nucleo_f746zg board with a Hitachi HD44780-compatible display.
Signed-off-by: Jamie McCrae <spam@helper3000.net>
Adds a refactored version of the psa_crypto sample back,
which was removed as part of the update to TF-M 1.7.0
due to unresolvable (at the time) issues with use of
MbedTLS instances on the S and NS sides.
This sample takes advantage of changes to MbedTLS and
TF-M that were introduced after the TF-M 1.7.0 and MbedTLS
3.3 release, and cherry-picked in Zephyr, allowing for
improved linking of MbedTLS in secure and non-secure
images. PSA API calls on the non-secure side can now be
correctly routed to the secure partition, while X.509
and TLS calls remain on the non-secure/Zephyr side.
Signed-off-by: Rajkumar Kanagaraj <rajkumar.kanagaraj@linaro.org>
Removed few VIF properties which are being hardcoded
Updated the script to parse source VIF XML and add information to
the output
Added optional Kconfig option to configure custom source VIF XML path
Cleaned up the code
Signed-off-by: Madhurima Paruchuri <mparuchuri@google.com>
Adding exemplary pytest shell test to show possibilities of new pytest
plugin. This test uses bidirectional communication between tester and
device under test.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Update the sensor shell logic to use the new sensor_read() APIs and
make triggers an option of the sensor_shell sample (this avoids the
trigger stealing the interrupt status from one-shot reads).
Signed-off-by: Yuval Peress <peress@google.com>
Updated the sample.yaml file with Console message Regex
pattern to fix Twister error.
Fix: #58074
Signed-off-by: Manimaran A <manimaran.a@microchip.com>
Add and use specific macros for manufacturer, product, and
serial number string descriptors.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Adds the AON Timer device in the OpenTitan Earlgrey device tree.
Adds overlay files to enable the watchdog and set the alias to
`watchdog0`.
Adds the AON timer (watchdog part) to the supported features section
of the OpenTitan documentation.
Signed-off-by: Tyler Ng <tkng@rivosinc.com>
Add a basic Robot Framework test suite utilizing the robot harness
runnable in Renode.
Signed-off-by: Michał Szprejda <mszprejda@antmicro.com>
Signed-off-by: Mateusz Hołenko <mholenko@antmicro.com>
