The iterator over registered callbacks failed to account for the
possibility that the callback would remove itself from the list. If
this occurred any remaining callbacks would no longer be reachable from
the node. Switch to the slist iterator that is safe for self-removal.
Note that the slist API remains unsafe for removal of subsequent nodes.
Even with the corrected code removal of the next callback registration
(cached in tmp) will result in it being called anyway, with the
remaining unremoved registrations not being called. If the next
callback were removed and re-registered on a different device, the
callbacks would be invoked for the wrong device.
Resolve this by a documentation change describing the conditions under
which a change to callback registration from within a callback are
permitted. Add a similar note regarding the effect of adding a
callback. The current event invocation behavior for callbacks added
within an event is explicitly left unspecified, though in the current
slist implementation newly added callbacks will not be invoked until the
next event.
Closes#10186
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
STM32 watchdog driver does not support callback which is not expected
by the test. Update to make test able to run on STM32 drivers.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Use auto-generated device tree macros in LPS25HB driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LSM6DS0 driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
This board is unmaintained and unsupported. It is not known to work and
has lots of conditional code across the tree that makes code
unmaintainable.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Building of nsim_em board will get the NSIM UART build tested so no need
to have an explicit test for it here.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Use auto-generated device tree macros in LIS3MDL driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LIS2MDL driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LSM6DSL driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Share lis2dh driver among few accelerometer sensors that has
same register interface: LIS2DH, LIS3DH, LSM303DLHC, LIS2DH12,
LSM303AGR.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LIS2DH driver to avoid
usage of dts.fixup files. The triggered interrupt part has been
slightly hacked to automatically understand whether only int1 is
configured or both int1 and int2.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Added tests for async UART API and test configuration for
nrf52840_pca10056 board.
For tests to work, RX and TX pins have to be connected together
and second UART is needed to output results to console.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Add support to STM LIS2DS12 3-axis accelerometer driver.
The driver support I2C and SPI bus communication and both
polling and drdy trigger mode.
Currently it uses high resolution only as power mode.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add a configuration structure to sht3xd that holds instance-specific
parameters, implemented in a immutable statically allocated object
initialized with material from device tree binding aliases.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Fails sporadically on this platform and causing CI blockage.
Filed bug #12478. Should be reverted once bug is fixed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds a test case checking if ADC drivers can work properly
after discarding an invalid sampling request.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Apart from normal customizations of vendor specific parameters in ADC
configuration used in the test, a few more changes in test cases were
also introduced in commit 1bfa34f4fb.
This resulted in some parts of ADC API (like zero interval between
consecutive samplings) not being tested at all. This commit restores
the original behavior of the test cases (with added comments that
zero intervals are intentional).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Currently only nRF drivers need assignments of analog inputs to ADC
channels (ADC_CONFIGURABLE_INPUTS Kconfig option is activated only for
these drivers). Hence, there is no need to define ADC_xxx_CHANNEL_INPUT
labels for any other ADC driver as they will be ignored anyway.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Change driver to get I2C address of sensor from the device tree like
most other sensor drivers that utilize device tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert lsm303dlhc_accel & lsm303dlhc_magn sensor driver to use new
defines so we can remove the dts_fixup.h code for it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Driver for networking device Microchip ENC28J60 is used as SPI slave,
moved to DTS type definition. Samples echo_client and echo_server use
this device on Arduino 101 board.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Disabled the CONFIG_COVERAGE for benchmarks and other tests.
This is needed because it interferes with normal behavior of the
test case.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
tests: Modify tests to use DEVICE_AND_API_INIT()
Modified samples/tests drivers to use DEVICE_AND_API_INIT() instead
of deprecated DEVICE_INIT() api
Signed-off-by: Varun Sharma <varun.sharma@intel.com>
In driver and application code use the new device-tree values produced
by standard compatible-instance bindings.
As this code may be used as an example add a comment describing how the
binding instance number cannot be reliably used to distinguish multiple
instances.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Zephyr has been using "i2c,eeprom" for the compatible property. This is
inconsistent with the property documentation which expects
"manufacturer,model" to be used.
The Linux standard compatible name for I2C EEPROMs is "atmel,at24". The
standard for SPI EEPROMS is "atmel,at25". We don't have support for the
latter, but change the name for the former.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Remove configuration parameter CONFIG_BUS_TYPE. Now we may
make use of DT_ST_LSM6DSL_BUS_I2C and DT_ST_LSM6DSL_BUS_SPI
definition to select the bus.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
With the new implementation we do not need a NULL terminated list
of kobjects. Therefore the list will only contain valid entries
of kobjects.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The options selecting nRF drivers are now enabled by default when
an nRF SoC is selected as the build target.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Convert lsm9ds0_gyro driver to get the device name as well as
i2c slave information and gpio info for triggers from device tree.
Updates the build_all test accordingly.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Convert lsm9ds0_mfd accel/magn driver to get the device name as well
as i2c slave information from device tree. Updates the build_all
test accordingly.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Convert lis2mdl magnetometer driver to get the device name as well
as i2c slave information from device tree. Updates the build_all
test accordingly.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Convert lis3dh accelerometer driver to get the device name as well
as i2c slave information from device tree. Updates the build_all
test accordingly.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
