test_single_shot_alarm_instance may fail due to not supported setting
of top_value in call to counter_set_top_value.
Modified to accept not supported case.
Fixes#21745
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Teardown may fail due to not supported setting of top_value.
Modified to accept not supported case.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Introduce a new counter API function for reading the current counter
value (counter_get_value()) and deprecate the former counter_read() in
favor of this.
Update all drivers and calling code to match the new counter API.
The previous counter driver API function for reading the current value
of the counter (counter_read()) did not support indicating whether the
read suceeded. This is fine for counters internal to the SoC where the
read always succeeds but insufficient for external counters (e.g. I2C
or SPI slaves).
Fixes#21846.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add a single counter API test case (not using callbacks) running in
user mode. Convert the existing test setup to use semaphores for
counting events to be able to utilize the same test setup and teardown
functionality in both user and supervisor mode tests.
Most of the counter API basic test suite still needs to run in
supervisor mode due the use of callback functions.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
On nRF platforms, Xtal LF clock source starts hundreds of milliseconds.
Until it is not started, test may fail due to wrong timing. Add initial
delay in the test for required clocks complete their start-up.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Refactors the mcux rtc driver to use generated device tree macros
directly. Removes now unused dts fixup macros from kinetis socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
COUNTER_LOG_LEVEL (defined in
subsys/logging/Kconfig.template.log_config) is derived automatically and
has no prompt. Assignments have no effect on promptless symbols.
Set COUNTER_LOG_LEVEL_DBG=y instead, which corresponds to
COUNTER_LOG_LEVEL=4.
Flagged by https://github.com/zephyrproject-rtos/zephyr/pull/20742.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Some tests assume that the counters are always counting up
without regard to their capabilitiy bits. So fix the tests
if those counters are counting down.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The seasonal overhaul of test identifiers aligning the terms being used
and creating a structure. This is hopefully the last time we do this,
plan is to document the identifiers and enforce syntax.
The end-goal is to be able to generate a testsuite description from the
existing tests and sync it frequently with the testsuite in Testrail.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Re-run with updated script to convert integer literal delay arguments to
k_sleep to use the standard timeout macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Added tests which verifies that:
- driver will detect when absolute alarm is set too late.
- short relative alarm is supported
- canceled alarm is not triggering user callback
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Implemented latest extensions to the counter API related to
detection of alarms being set too late and short relative alarms.
Implementation could not be realized on nrfx_rtc driver thus
driver has been reimplemented based on nrf_rtc hal.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Application board.overlay files tend to be paired with
boards/board.conf files that extend the functionality of a board.
Move the overlay files to the same location as the config files that
they work with.
A few overlay files that are paired with a prj_board.conf file in the
application root directory are left in place.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
No users of this driver after dropping quark platforms.
COUNTER_0_NAME was only defined by the QMSI driver and was defined but
not used in DTS fixup files of ateml_sam0 SoCs. Removing those leftover
defines as well.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Flags in alarm configuration structure will allow further extention
without breaking API. Initially, existing absolute flag was added
as the only flag.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
move counter.h to drivers/counter.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit introduces new top_value setting configuration structure
with flag for controlling resetting of the counter during change of
top value.
Such change allows for #12068 implementation on hardware which
does not provide alarms.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Reduced Kconfig for counter with nRF TIMER and RTC. Added overlays
for TIMER and RTC configuration in the counter test.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Enable the counter capability in the board and add a .conf file for the
nRF52810 running on the PCA10040 board.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit adds support for board: nrf52811_PCA10056.
The nRF52840 DK: PCA10056 is the recommend development kit, it emulates
the nRF52811, and can be used as a starting point for development
before moving over to a custom board.
Please note that this development kit does not support Bluetooth
Direction Finding. What is more it cannot be used with most of Arduino
shields because of PCA10056 PIN layout.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Exclude nucleo_f302r8 platform as the tests doesn't fit in flash size.
This is due to that fact that we pull in newlib for the STM32 counter
driver.
Fixes#15460
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix issue reported by coverity regarding using volatile
variables in zassert_equal macro.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fix issue reported by coverity regarding using volatile variable
in zassert_equal macro.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Port all users of 'set_conf_file' to use the built-in rules
instead. This follows the convention-over-configuration principle to
make the system as a whole simpler and more consistent.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The qmsi rtc hardware supports a single alarm only and a fixed top
value, so restructure the counter_basic_api test to skip unsupported
features.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Tests were failing because:
1. `alarm_cnt` was not reset before the test.
2. one test was failing because it was expecting that setting
`top_value` for channel_alarm is too high value but in fact
it is accepted and `top_value+1` is too much.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The code has been using non DT_ prefixed defines for DT generated
defines. Switch to use DT_ prefixed ones as we want to deprecated
the non DT_ prefixed defines.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The function to set channel alarm is called counter_set_channel_alarm.
To match the name of the function performing the reverse operation this
commit renames counter_disable_channel_alarm() function to
counter_cancel_channel_alarm().
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Update counter_basic_api test to support STM32 RTC counter.
Add device to list and skipp not supported test cases.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Enable testing of counter (COUNTER_{D}TMR_CMSDK) on mps2_an385 and
enable timers on v2m_beetle (TIMER_{D}TMR_CMSDK).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Enables debug logging in the counter_basic_api test. Fixes a build error
in the nrf counter drivers when logging is enabled.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The mcux rtc hardware supports a single alarm only and a fixed top
value, so restructure the counter_basic_api test to skip unsupported
features.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Tests i.MX EPIT timer peripheral driver. Since it supports zero number
of channel alarms, some tests had to be adjusted to look at the
number of channel alarms supported first.
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Renamed:
- counter_set_wrap to counter_set_top_value
- counter_get_wrap to counter_get_top_value
- counter_get_max_wrap to counter_get_max_top_value
Updated nRF implementations and counter test.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
