Fix compilation issues that show up if SYS_LOG is mapped to printk
instead of printf. Unlike printf, printk is annotated so that the
compiler catches incorrect format specifiers passed to it.
Change-Id: Iab7cc6da110e9c98720211a6f773dcf055a3a411
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
CC2520 is not embedded on an arduino_101, it is however possible to wire
one, and thus it requires to provide cc2520_configure_gpios() function.
This one, being common to a101 is found in samples/net/common.
Change-Id: I86f2734847edb3f6a968522afccc3099ed854d13
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As the default board is qemu_x86, make sure there is similarly
named config file that can be used by default.
Change-Id: Ibc480d3b4eecc2601e3670c8da19be9c01833c36
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use by default a board specific config files for both
echo-server and echo-client sample applications.
This makes more sense than using the network technology specific
config file that was used earlier.
Change-Id: I155fc138f4b0ed1166f4e25267513afc3fb6fd76
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove legacy stack artifacts from the echo-server and echo-client
config files.
Change-Id: Icc591b9540495c4ee181517369b0df9bb91972bb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the native IP stack is now the default, there is no need
for corresponding Kconfig option.
Change-Id: I08e4992f540f928a2b7378e8803e634e38725348
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit removes the legacy Contiki based uIP stack.
The new native IP stack must be used after this commit.
The commit also removes following things:
- legacy cc2520 driver
- legacy ethernet drivers
- legacy IP stack samples
and changes these things:
- disabled tests that only work for legacy IP stack
- select new IP stack by default
- enable random number generator by default as it is needed
by the new IP stack
Change-Id: I1229f9960a4c6654e9ccc6dac14a7efb9394e45d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The used IPv6 or IPv4 address can be set in the config file.
This way one does not need to edit the source file to setup
the desired IP address.
Change-Id: Ic900bd4694481b4b035026ad0ba7b9280eb84e4a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user has enabled DHCPv4 support, then do not try
to set static IPv4 address.
Change-Id: Ia359f578044d72b951f53c509c92c09d575207f0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Having 1024 bytes was really unsufficient and creating a lot of weird
bugs everywhere.
Change-Id: Ib642744fa6dfc9f3a699a0dc2f0c1783dc6f87b2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Semantic has changed in k_sem_take in comparison with legacy
nano_sem_take.
Change-Id: I06129b6f15f66266919bf371c2358e5634109156
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is meant to test echo applications with 802.15.4 L2 directly in
qemu.
Change-Id: I0edccd8c39360421dc77e0064147221d86877bdf
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Previous commits support auto configured IPv6 addresses so no
need to manually tweak the address settings.
Change-Id: Ie641212981a04229721c84990a54876977d9cfc4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Forcefully set the IPv6 address in echo-client so that we
can use that address when sending data. Normally this should
not be done like this as the system should autoconfigure itself.
Change-Id: Id24f9aa84b30a3da941bb6b9e4522c7218687e12
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Current net_nbuf_write() api just appends data to last fragment. And
doesn't write data based on offset. That's why renaming this api.
New net_nbuf_write() apis based on offset will be coming soon.
Change-Id: Ie8e13e5f6091a279b62b6d8b0b3928a5187e75b0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Extends the echo server and echo client samples to work with YAIP
network stack with ethernet L2 layer and ENC28J60 ethernet device
on Arduino 101 boards.
Jira: ZEP-859
Change-Id: I242e5555aff18741bf00a551424b081b5396f4b3
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
In some cases the BT header files are missing and the compilation
will fail when done by sanitycheck script.
Change-Id: I484e1f0c23975053e947bc57ff3c9f4042fad71e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The prj_slip.conf file should be used for qemu-to-host
communication only. It is not usable for testing between
two qemus.
Change-Id: Id06813a1b36f33f585e06df3f29479891ea3d2d8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Restructure the Bluetooth options more logically.
- Both host and controller are now behind the same high level
CONFIG_BLUETOOTH.
- Selecting controller support disables other HCI driver selection, so
the controller isn't in the same list as HCI drivers any more.
- Under the top-level there's a "Custom stack" option, which when
enabled opens up the option of choosing CONFIG_NBLE.
There are various other cleanups and simplifications in this patch as
well, since splitting these up would have been fairly tricky while
making sure all test cases still build.
Change-Id: I5bb715cb9d20201cb8b72fbd149c8a09a4b2d7d2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove generic PRINT macros from net samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I4bec179c99056cce41e1f3495c162f25c3cd2364
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
ieee802154 driver is now using new system log macros, update the
Kconfig variable to be a level rather than a bool and the .conf
files at samples.
JIRA: ZEP-311
Change-Id: I640e973d880c3a222cd7c13a72d35edf49ada3a8
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Tags should be separated with spaces no with comma.
Change-Id: I5381200bcd0caf59f3601ec849d698966c734a28
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
$srctree for the application might not be set to be $ZEPHYR_BASE, use
$ZEPHYR_BASE instead to be more explicit in the build.
Change-Id: Iefa5ff59f246b584949329044f7a6531adc6ed62
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This add CONFIG_BLUETOOTH_DEBUG_LOG which depends on SYS_LOG since the
later can actually use either CONFIG_PRINTK or CONFIG_STDOUT_CONSOLE.
Change-Id: Ib2974d1331f6c91d119a218ec95e8bf01069377b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The echo-client can now initiate a TCP connection.
Change-Id: I8223ef377127319dd1791497675a4abe8b382365
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the active connection to another TCP host fails, then
quit as it is no point continuing.
Change-Id: I21317d7062d4ac93c342834a2503139fe27076e7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If TCP is activated, then the echo-client application opens
a TCP socket and starts to send data to server. For TCP
connections, the application data is not reversed because
it would make it difficult to verify the data in the sender
side.
Change-Id: I35306b8ecd6794365086a23bf6a17f5103d7ac80
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can enable TCP server (listening socket) support in the
IP stack. This commit does not yet have TCP client (connecting
socket) support.
Change-Id: I75dd02a81addc1d1e026463b53631d56378157df
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This prepares for adding other debug types besides the printf-style
logging to the console.
Change-Id: Ic2ed305192491734da991c4f61fdaace03fd60f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It will not build without it. Generalize it then.
Change-Id: I334586f629de1f057e654a13a1c705cd559b44d8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Makefile.ipstack is more generic to net applications which
communicate through slip or between two qemus. So net apps
common folder is right place for it.
Change-Id: I57ca1eeaff28b853609daf92772361406131aa7e
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If the echo-server and echo-client are run in real hw, then
we need to add the used IPv6 prefix to the system. Otherwise
the client is not able to send anything because there is no
route to 2001:db8::/64 network that is used in these examples.
Change-Id: I3a00b77acf1329b3e448bd62ec38cc408c0bd086
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This moves IPSS sample code to samples/bluetooth/gatt which shall become
the default place for GATT related samples that can be reused.
Change-Id: I04089f6e43bfcc30ee1c7cc766620f19e3dad08e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move network testing setup from echo-client to common net_testing.h
file which makes the application much simpler.
Change-Id: Ib1a90b9d87014b7f9adc5f6865ce0fc9faa13422
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add separate prj_qemu.conf files for qemu_86 board type. Also
remove set_options from Makefile.ipstack which is not required now.
Now build the echo-server with "make server NET_IFACE=qemu" and
echo-client with "make client NET_IFACE=qemu" command options.
Change-Id: I1f3c9c6a198f2b6cae54ae4a5da970b284ef84de
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add bt related qemu flags only when BT is enabled.
Change-Id: Idc611dcf7726829ed77c3f4898abd794a825212f
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This enables using echo_client with Bluetooth by passing
CONF_FILE=prj_bt.conf, it is also enabled for testing so changes to
echo_client are actually tested with NETWORKING_WITH_BT.
Change-Id: I1ff83a9d0049e121dc7e406656e3282b16ee8c91
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is prefered to use #if (!)defined form for checking defines since it
can actually check more complex conditions.
Change-Id: Ib8779a344a1a7ec02f10b0e23a533c78e68343b5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If neighbor discovery is in use, then we do not need to do
various route etc setup. Normally ND needs to be active
but in some specific scenarios it can be turned off. One
such scenario is if an application is run inside qemu
which uses slip and host tun0 interface for communication,
in this case host typically do not activate ND for tun0
so we need to disable it also in zephyr side.
Change-Id: I8ac59990c5bbcdb06cca98bde7be3a0ad6e807a8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Rename application init function to init_app() so that it is more
descriptive.
Change-Id: Id470756345c0bd10b103270115b26f3e8a281d17
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use link local addresses instead of public IPv6 addresses
in the demo applications. This way the application do not
need to do any special setup.
Change-Id: I9aa817c388e3f673a6597801813dd1d0a8feb6b5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add spaces after a list of values as required by checkpatch script.
Change-Id: I04bd8af8195e3966fd2b9c36ead49483030eae18
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
