Now that the relevant APIs generalize properly for bindings without
flags, we can remove some special case checks from the tree.
I couldn't find any more, but I did this kind of quickly, so it's
possible I missed some.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Though there were issues with this sample before e959386bd2 ("samples:
servo_motor: cleanups and changes"), that commit introduced further
bugs. This happened because the new pwm-servo alias that commit
switched to wasn't provided by any boards, so it wasn't built in CI.
Before that, however, the recommendation to use bbc_microbit in the
sample documentation was also buggy in a couple of ways:
1. bbc_microbit doesn't have the pwm-0 alias the sample
previously required, so it didn't build on that board
2. the documentation's comment to use pin 0 on the edge connector
is wrong; PWM channel 0 is wired to GPIO P0.0 on the SoC,
which is actually pin 21 on the connector
Fix it all up.
Tested on bbc_microbit. I verified the pinout and also made sure that
the sample correctly generates pulses from 700 to 2300 usec.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Align the docs and source code with other changes done to the basic
samples.
Use numbers 0 and 1 to refer to the LEDs consistently. This matches
the generic devicetree aliases used by Zephyr, instead of using USR1
and USR2, which are specific to 96b_carbon.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Align the sample with changes made to other basic samples.
Move away from 'pwm-0' as a devicetree alias, requiring applications
to define a 'pwm-servo' alias. We are getting rid of the aliases that
just bounce through to node labels as soon as we can, might as well
get the applications ready now.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Align the sample and its documentation with the other basic samples.
Adjust the fade algorithm so that it looks better and takes less time
to verify by taking 2.5 seconds instead of 10.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The difference between "blinky" and "blink_led" is not clear.
This rename makes it more obvious that "blinky_pwm", well,
blinks an LED using PWM.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Align this sample's source code and documentation with other basic
samples.
Adjust the logging configuration and output some additional printk()s
at startup to make it more obvious that initial errors are device
specific and related to calibration.
Fix the period calculation logic so the sample does not stick at the
maximum and minimum periods for two consecutive four-second periods.
That is, instead of setting the pin period to MIN_PERIOD_USEC twice in
a row, do it only once before doubling again, and similarly for
max_period.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up the code and fix the documentation, which is out of date and
still refers to information from the days of board.h.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The devicetree link is rendering as "Devicetree Guide" instead of
"devicetree". Fix that.
My guess is that most users won't care about the details of the
requirements, and rather just want to know if their board is supported
or not. So move the error you'll see on unsupported boards before the
details about how to add support (which involve a pretty significant
learning curve).
Also mention overlays as a way to get this working.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Rename DT_HAS_NODE to DT_HAS_NODE_STATUS_OKAY so the semantics are
clear. As going forward DT_HAS_NODE will report if a NODE exists
regardless of its status.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rather than redefining a macro which might be generated we should create
a new define name that should get used in the code. Replace redefining
DT_ALIAS_LED0_GPIOS_FLAGS with LED0_FLAGS and DT_ALIAS_LED1_GPIOS_FLAGS
with LED1_FLAGS.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rather than redefining a macro which might be generated we should create
a new define name that should get used in the code. Replace redefining
DT_ALIAS_SW0_GPIOS_FLAGS with SW0_FLAGS and DT_ALIAS_LED0_GPIOS_FLAGS
with LED0_FLAGS.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit renames the Kconfig `FLOAT` symbol to `FPU`, since this
symbol only indicates that the hardware Floating Point Unit (FPU) is
used and does not imply and/or indicate the general availability of
toolchain-level floating point support (i.e. this symbol is not
selected when building for an FPU-less platform that supports floating
point operations through the toolchain-provided software floating point
library).
Moreover, given that the symbol that indicates the availability of FPU
is named `CPU_HAS_FPU`, it only makes sense to use "FPU" in the name of
the symbol that enables the FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Enables PWM support using the built-in red LED. Tested with:
- samples/basic/blink_led
- samples/basic/fade_led
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Run the int_literal_to_timeout Coccinelle script to fix places where
it is clear that an integer duration is being passed where a timeout
value is required.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Kernel timeouts have always been a 32 bit integer despite the
existence of generation macros, and existing code has been
inconsistent about using them. Upcoming commits are going to make the
timeout arguments opaque, so fix things up to be rigorously correct.
Changes include:
+ Adding a K_TIMEOUT_EQ() macro for code that needs to compare timeout
values for equality (e.g. with K_FOREVER or K_NO_WAIT).
+ Adding a k_msleep() synonym for k_sleep() which can continue to take
integral arguments as k_sleep() moves away to timeout arguments.
+ Pervasively using the K_MSEC(), K_SECONDS(), et. al. macros to
generate timeout arguments.
+ Removing the usage of K_NO_WAIT as the final argument to
K_THREAD_DEFINE(). This is just a count of milliseconds and we need
to use a zero.
This patch include no logic changes and should not affect generated
code at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This doesn't sacrifice any readability when compiled for boards that
don't support this alias.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We rename the nRF51 Dev Kit board target (nrf51_pca10028)
to nrf51dk_nrf51422. We update all associated references
in the supportive documentation and all nRF51-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This sample requires led0 in the board devicetree's /aliases.
Improve the error message when that is not available.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Improve the documentation of the blinky sample, fixing typos, adding
links to the relevant DT documentation and cleaning up a bit.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update sample application to use new GPIO API:
- GPIO flags defined by the devicetree
- replace gpio_pin_write with gpio_pin_set function
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Update gpio_pin_configure() to take into account GPIO flags defined by
the devicetree. Use gpio_pin_get/gpio_pin_set to verify reading/writing
of logical pin values. Use gpio_pin_interrupt_configure() to configure
interrupts.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is select'ed automatically by the X86_MMU, ARM_MPU, and
ARC_MPU symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add support for requesting an inverted PWM pulse (active-low) when
setting up the period and pulse width of a PWM pin. This is useful
when driving external, active-low circuitry (e.g. an LED) with a PWM
signal.
All in-tree PWM drivers is updated to match the new API signature, but
no driver support for inverted PWM signals is added yet.
All in-tree PWM consumers are updated to pass a flags value of 0
(0 meaning default, which is normal PWM polarity).
Fixes#21384.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The seasonal overhaul of test identifiers aligning the terms being used
and creating a structure. This is hopefully the last time we do this,
plan is to document the identifiers and enforce syntax.
The end-goal is to be able to generate a testsuite description from the
existing tests and sync it frequently with the testsuite in Testrail.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
As noted in the issue #20666 discussion, though the console is not used
by this sample app, it can't really be "disabled" using this Kconfig
option, so remove the CONFIG_SERIAL=n line.
Fixes: #20666
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Commit 16d8ce519c introduced changes
that caused this sample to no longer behave according to documentation
and for some hardware to no longer work at all.
On nRF51 SoCs for instance, the reported number of cycles per second
is 16M, what makes the calculated max_period and min_period to be 16
and 0 microseconds, respectively, what effectively makes it impossible
for the sample to return to the initial blinking frequency. Moreover,
with such short PWM periods, the blinking is not even noticeable.
This patch partially reverts the changes mentioned above, and instead
of calculating max_period and min_period basing on the reported clock
rate, it tries to only decrease the max_period if needed, accordingly
to what the used hardware can handle.
Documentation is also updated to mention the possible change in
observed behavior of the sample on some hardware.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit removes the disco sample because it is basically
the same as blinky but with two LESs and adds no new value
to the samples.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
convert sample and test yaml filters that utilize a DT_ define to
instead use a dt_ function. The intent is to remove the Kconfig
generated DT defines and just make directy queries into the device tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
DTSpec writes this as a single word, presumably to make it easier to
grep for / more precise. Follow along in the rest of the docs now that
our main DT docs page agrees with this usage.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Instead of having a mix of west and CMake/ninja instructions for
building and flashing, document it using only west. This will help
clarify that west is the default build tool in Zephyr and should also
reduce confusion over what tool to use.
Note that the biggest change is changing the default in
doc/extensions/zephyr/application.py for :tool:, from all to west.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The maximum period a PWM controller can generate depends on its input
clock and its resolution (16-bit, 32-bit...). Setting a 1s max period
generates error with some hardwares (mimxrt1064_evk) because of clock
limitation.
This patch fixes this issue by calculating maximum period of the PWM
device to adjust max and min periods accordingly.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
k_cycle_get_32() returns an unsigned 32-bit integer, while the '%d'
specifier denotes a signed integer.
Using the proper C99 format specifier resolves the problem.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When tickless is available, all existing devices can handle much
higher timing precision than 10ms. A 10kHz default seems acceptable
without introducing too much range limitation (rollover for a signed
time delta will happen at 2.5 days). Leave the 100 Hz default in
place for ticked configurations, as those are going to be special
purpose usages where the user probably actually cares about interrupt
rate.
Note that the defaulting logic interacts with an obscure trick:
setting the tick rate to zero would indicate "no clock exists" to the
configuration (some platforms use this to drop code from the build).
But now that becomes a kconfig cycle, so to break it we expose
CONFIG_SYS_CLOCK_EXISTS as an app-defined tunable and not a derived
value from the tick rate. Only one test actually did this.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We use the following commands to rename any
LED._GPIO_{CONTROLLER,PIN,FLAGS} to
DT_ALIAS_LED._GPIOS_{CONTROLLER,PIN,FLAGS}
git grep -l LED._GPIO_CONTROLLER | xargs sed -i 's/LED\(.\)_GPIO_CONTROLLER/DT_ALIAS_LED\1_GPIOS_CONTROLLER/g'
git grep -l LED._GPIO_PIN | xargs sed -i 's/LED\(.\)_GPIO_PIN/DT_ALIAS_LED\1_GPIOS_PIN/g'
git grep -l LED._GPIO_FLAGS | xargs sed -i 's/LED\(.\)_GPIO_FLAGS/DT_ALIAS_LED\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We use the following commands to rename any
SW._GPIO_{CONTROLLER,PIN,FLAGS} to
DT_ALIAS_SW._GPIOS_{CONTROLLER,PIN,FLAGS}
git grep -l SW._GPIO_CONTROLLER | xargs sed -i 's/SW\(.\)_GPIO_CONTROLLER/DT_ALIAS_SW\1_GPIOS_CONTROLLER/g'
git grep -l SW._GPIO_PIN | xargs sed -i 's/SW\(.\)_GPIO_PIN/DT_ALIAS_SW\1_GPIOS_PIN/g'
git grep -l SW._GPIO_FLAGS | xargs sed -i 's/SW\(.\)_GPIO_FLAGS/DT_ALIAS_SW\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We use the following commands to rename any _PWM_{CONTROLLER,CHANNEL}
to *_PWMS_{CONTROLLER,CHANNEL}
Used the following commands to make these changes:
git grep -l '[A-Z_0-9]*_PWM_CONTROLLER' | xargs sed -i 's/\([A-Z_0-9]*\)_PWM_CONTROLLER/DT_ALIAS_\1_PWMS_CONTROLLER/g'
git grep -l '[A-Z_0-9]*_PWM_CHANNEL' | xargs sed -i 's/\([A-Z_0-9]*\)_PWM_CHANNEL/DT_ALIAS_\1_PWMS_CHANNEL/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/__assert.h to sys/__assert.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move pwm.h to drivers/pwm.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move gpio.h to drivers/gpio.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert DT_.*_GPIO_{CONTROLLER,PIN,FLAGS} ->
DT_.*_GPIOS_{CONTROLLER,PIN,FLAGS)
Used the following commands to make these conversions:
git grep -l DT_.*_GPIO_CONTROLLER | xargs sed -i 's/DT_\(.*\)_GPIO_CONTROLLER/DT_\1_GPIOS_CONTROLLER/g'
git grep -l DT_.*_GPIO_PIN | xargs sed -i 's/DT_\(.*\)_GPIO_PIN/DT_\1_GPIOS_PIN/g'
git grep -l DT_.*_GPIO_FLAGS | xargs sed -i 's/DT_\(.*\)_GPIO_FLAGS/DT_\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Removed Quark D2000 SoC files and first-order related DT bindings.
A few config options have been moved from the CONFIG_* space to
the DT_* space, as they were defined in the D2000 Kconfig files
and "leaked" into the other Quark trees.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
YAML document separators are needed e.g. when doing
$ cat doc1.yaml doc2.yaml | <parser>
For the bindings, we never parse concatenated documents. Assume we don't
for any other .yaml files either.
Having document separators in e.g. base.yaml makes !include a bit
confusing, since the !included files are merged and not separate
documents (the merging is done in Python code though, so it makes no
difference for behavior).
The replacement was done with
$ git ls-files '*.yaml' | \
xargs sed -i -e '${/\s*\.\.\.\s*/d;}' -e 's/^\s*---\s*$//'
First pattern removes ... at the end of files, second pattern clears a
line with a lone --- on it.
Some redundant blank lines at the end of files were cleared with
$ git ls-files '*.yaml' | xargs sed -i '${/^\s*$/d}'
This is more about making sure people can understand why every part of a
binding is there than about removing some text.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Cleanup references to boards in some of the example and use the same
boards through the examples. Other minot cleanups and make the text more
generic and not specific to certain boards.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Hardware PWM make sense for servo control even in a sample, add HW PWM
choice for NRF52 family, which support it.
Signed-off-by: Aaron Tsui <aaron.tsui@outlook.com>
Add a minimal sample that showcases minimal ROM sizes. It can be built
in several configurations, all very restrictive when it comes to
features enabled in order to verify the fact that we can fit in small
devices and to be able to accurately measure the sizes of the kernel's
basic features.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample did not enable gpio driver, so nothing happens after flash
firmware into a board.
By enabling gpio driver to fix it.
Signed-off-by: Aaron Tsui <aaron.tsui@outlook.com>
A new role :zephyr_file: is available that renders to a link to the file
or folder in GitHub. Find appropriate references using :file: and
convert to :zephyr_file: to take advantage of its linking capability.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Most of the basic tests trigger LEDs or expect button press and would
hang in device testing because we can't parse success or failure from
the console. Define harness for this with the intent to skip those in
sanitycheck device testing and until we have a better way to test those.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some boards' configuration does not enable GPIO by default,
like nrf52_pca10056, it causes ASSERTION FAIL when running
this application. This fix is to enable GPIO by default for
the basic threads sample, like basic blinky sample does.
Signed-off-by: Aaron Tsui <aaron.tsui@outlook.com>
commit ddf744deee ("drivers: pwm_nrfx: Use Device Tree label as
instance name") removed the config setting for PWM names and replaced
it with DT_NORDIC_NRF_PWM_PWM_*_LABEL.
This change is causing the blink_led and fade_led samples to break
when compiled for nRF52 boards.
Let's update the samples to use the DT setting.
Signed-off-by: Michael Scott <mike@foundries.io>
Update the filters that are extracting info from DT to use a define that
has a DT_ prefix so its clear that its coming from DT_. Also this lets
us remove any non-DT prefixed defines in the conf db.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Indicate that PWM is supported on several Nordic DK boards so that
the pwm_nrf5_sw and pwm_nrfx drivers are covered by CI builds.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Enable HW PWM driver instead of the SW one on nRF SoCs where the PWM
peripheral is present.
Default PWM instances are also enabled on Nordic DK boards so that it
is possible to build the basic fade_led sample for them without extra
adjustments.
After the above changes are applied, some configuration alterations
in basic samples blink_led and fade_led become no longer needed.
These are removed. And the blink_led sample is corrected so that it
works with the nRF HW PWM driver as well.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Supported PWM at pins A0, D3, D5 and D6 which are also Arduino
compatible. Also the onboard red LED can be used with PWM.
The basic/{fade_led, blink_led} samples to apply to this board
seemlessly and operate on the onboard red LED.
Also supported RTC.
Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
blinky/button and disco samples are now using definitions
generated from boards dts files.
Update samples README files accordingly.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
It is safe to assume that if X_GPIO_CONTROLLER is defined (hence
generated) X_GPIO_PIN should also be defined.
If this is not the case, this is an issue and letting the sample
build will reveal the issue.
Update the yaml filter to rely only on _GPIO_CONTROLLER #define's
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In disco basic sample, same GPIO controller was used for LED0
and LED1, which is actually a particular case.
This change implements the general case, where LED0 an LED1 might
not have the same gpio controller.
Tested on nucleo_f429zi and frdm_k64f.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Since the Arduino 101 and the Quark SE C1000 are not actively developed
boards, default to other boards that are maintained and used.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Do not limit to whitelisted boards, instead make it build/run for any
board that defines required DTS macros.
Remove QMSI kconfigs and depend on DTS only.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not limit to whitelisted boards, instead make it build/run for any
board that defines required DTS macros.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not limit to whitelisted boards, instead make it build/run for any
board that defines required DTS macros.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
1. Modified fade_led PWM example to include
nRF HW PWM option.
2. Added fade_led nrf52_pca10040.overlay
in order to enable PWM node and choose
output PWM GPIO for channel 0. Channel 1
GPIO enable but not used in sample src.
Signed-off-by: Gaute Gamnes <gaute.gamnes@nordicsemi.no>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Now that we set LED info in the device tree for all boards we don't need
to special case handle in the name/led pin (it comes from DT). We can
also remove include board.h.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The only difference between the F413xH and F413xG is flash memory size.
STMF413xH: 1536 Kbytes
STMF413xG: 1024 Kbytes
Signed-off-by: Benoit Leforestier <benoit.leforestier@gmail.com>
We update 'blink_led', 'fade_led' and 'rgb_led' to support dt generated
defines for the PWM info needed for each. Since hexiwear_k64 supports
generating the info, moved the support for hexiwear_k64 to just use the
dt generated defines.
For 'blink_led' and 'fade_led' we use an alias in dt called 'pwm-led0'.
For 'rgb_led' we use aliases 'red-pwm-led', 'green-pwm-led' and
'blue-pwm-led'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
For blink_led, fade_led, and rgb_led, we only need board.h for the
hexiwear_k64 board. Remove other references to board.h and only
include it if we are building on hexiwear_k64
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Remove redundant 'sample' tag and add something that matches the
functionality and features being tested, demonstrated.
Avoid short abbriviations and using full names for fs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add support for nRF boards by using the software-based PWM driver. The
prescaler has to be configured so that the clock runs slower in order to
make the on-board LED blink in the way it is described in the Readme.
Signed-off-by: Johannes Hutter <johannes@proglove.de>
There is no reason why this sample should have a higher version required
of CMake in order to build.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit updates the button sample to use the dts-generated
define to configure the button pull-up when the custom define
is not present.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Rename GPIO_INT_CONF to GPIO_FLAGS in order to be able to use
the definition generated by the devicetree, eliminating the need
for definition in the board.h file
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Rework samples using LED and GPIO to enforce use of "CONTROLLER"
as LED and PGIO postifx.
Change impact all samples that could be run by boards yet moved to
GPIO node generations, which is only STM32 for now
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Upcoming Nordic ICs that share many of the peripherals and architecture
with the currently supported nRF5x ones are no longer part of the nRF5
family. In order to accomodate that, rename the SoC family from nrf5 to
nrf, so that it can contain all of the members of the wider Nordic
family.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Applies to #4008 and #5159 for this board. Problem is that the
button interrupt callback was only firing once. Solution is to
set the pin pull up flag to GPIO_PUD_PULL_UP.
Signed-off-by: Anders Pitman <tapitman11@gmail.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The GPIO unit on the SAM0 is called 'PORT' which conflicts with the
name used in this sample. Rename to LED_PORT instead.
Signed-off-by: Michael Hope <mlhx@google.com>
The basic/threads sample is printing a log that looks like this:
Toggle USR0 LED: Counter = 0
Toggle USR1 LED: Counter = 0
Toggle USR0 LED: Counter = 1
Toggle USR0 LED: Counter = 2
Toggle USR0 LED: Counter = 3
Toggle USR0 LED: Counter = 4
From that log you would think that it was logging when leds were
blinking, but actually the led-threads might have crashed, and it
would just continue logging anyway. All it's doing is executing
printk's at roughly the same frequency as the LED's are blinking.
This patch rewrites the sample to use a FIFO so that the printk's only
trigger if the LEDs are actually blinking.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Remove build_only and add harness type needed for the sample/test to
allow running with sanitycheck and on devices once we have harness
support.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Still need a better way to filter and a better way to support multiple
platforms with these tests, but for now we remove the build_only tag and
make it depend on real HW.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The following files didn't have any copyright or license headers on them
when they got contributed. So add the SPDX Apache license and
appropriate copyright info:
boards/arm/stm32l476g_disco/pinmux.c
samples/basic/threads/src/main.c
tests/net/socket/tcp/src/main.c
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Per ZEP-1958, Phase 2 of adding CC3220sf LaunchXL support,
was to "deprecate the CC3200 launchxl support in Zephyr
(redundant to the CC3220)."
Effectively, the CC3220 SOC replaces the CC3200.
This patch removes the following:
* the imported CC3200 SDK
* CC3200 SOC, board, DTS files.
* adjusts other files where cc3200 was mentioned.
Also, it fixes explicit references to CC3200 in generic
CC32xx driver files.
Jira: ZEP-1958
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The hexiwear_k64 board can drive the leds with a pwm, so update the
rgb_led sample to work with this board.
Jira: ZEP-2025
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The hexiwear_k64 board can drive the leds with a pwm, so update the
fade_led sample to work with this board.
Jira: ZEP-2025
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The hexiwear_k64 board can drive the leds with a pwm, so update the
blink_led sample to work with this board. Reduces the maximum blinking
frequency from 500 Hz to 64 Hz because your eye can't distinguish these
higher frequencies (the led appears solidly on). Increases the minimum
blinking frequency from 0.5 Hz to 1 Hz because the mcux pwm driver can't
handle frequencies less than 1 Hz.
Jira: ZEP-2025
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
We have many testcases doing filtering both on the architecture level
and the platform level, which is redundant. Also many testcases are
running the same test twice on the same SoC for no good reason, cleanup
the tests and cleanup the filtering.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The STM32F412 has PWM output capabilities. Add support to the blink_led
samples.
Tested using a Nucleo STM32F412ZG board (PWM output on pin 28 of the
CN11 Morpho connector and pin 29 of the CN10 Zio connector).
Change-Id: I75fb986fa97bd1c07c6375938430e7963297cd9d
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
The STM32F413 has PWM output capabilities. Add support to the blink_led
samples.
Tested using a Nucleo STM32F413ZH board (PWM output on pin 28 of the
CN11 Morpho connector and pin 29 of the CN10 Zio connector).
Change-Id: I3b25b09cab54265b28088ac9681aec588d9d48b5
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
Rename SOC_STM32L476XX to SOC_STM32L476XG to keep flash
size information.
Aim is to be able to distinguish flash size variants of
the SoC when needed (for instance in dts/arm/st/mem.h file)
Change-Id: I834bb5b83c24c39e90c0492a2b22a7c7802de361
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I08c682bfc0b80dfa88de859e90a011bcd2db2762
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add support for nRF5x series GPIOTE based PWM driver
implementation.
Provides upto 3 pins/channels using one HF timer, two PPI
channels per pin, and one GPIOTE config per pin.
Change-id: I6056b199ec2cff595ba8fea9f659a0338ed4635b
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Docs need a label at the top so we can use :ref:`labelname`
to create a link to that doc from other docs.
Change-Id: I57d65a8888f78aa61d776f607a5db86bdb35726c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Use the config name defined by the driver Kconfig in device
binding calls as that is safer because device name can change and
the app does not need to change.
Jira: ZEP-1764
Change-Id: I3c7716fd72e77c99fd29e4e90634c33f47f32e4c
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Use the config name defined by the driver Kconfig in device
binding calls as that is more portable and safer because device
name can change and the app does not need to change.
Jira: ZEP-1764
Change-Id: If8c14dd4eb186bace863432d454c9122461f2f9c
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Use the config name defined by the driver Kconfig in device
binding calls as that is more portable and safer because device
name can change and the app does not need to change.
Jira: ZEP-1764
Change-Id: I3287da5c5a9df24507efa84bbf7bbb051726bc2c
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
The headings on some .rst files were not following the expected
heading order of using # for h1, * for h2, = for h3, and - for h4
This patch fixes that, and the doc/templates/*.tmpl files created
for folks to use as templates for creating board and sample docs.
Change-Id: I0263b005648558d5ea41a681ceaa4798c9594dd9
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch moves pwm driver samples to samples/basic and also convert
documentation of PWM samples to RST.
Jira: ZEP-1536
Change-Id: Ib2b3ff8b1722a26618e9a6fe416e2138d82ca28b
Signed-off-by: Punit Vara <punitvara@gmail.com>
Remove legacy option and use SYS_CLOCK_EXISTS where appropriate.
Change-Id: I3d524ea2776e638683f0196c0cc342359d5d810f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will allow inclusion of documentation files that exist outside of
doc/ and will make it possible to add rst files across the tree,
especially for boards, samples and tests.
Change-Id: I7afcf92d99f504b2bc0b2b7e3452acb2f8e08294
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
SW0_GPIO_INT_CONF shall allow boards to define the
interrupt configuration for SW0 without having to modify
the button sample app.
If SW0_GPIO_INT_CONF is defined set EDGE to it, otherwise
used default EDGE value.
Change-Id: Ia697e06debc341463ed9cdee1db564f3727d27e3
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
The README.txt file is updated with information about wiring
and building. A testcase.ini file is also added by this patch.
Change-Id: I7354d844ac3dec41f0c9af02ede5da26f3ad0398
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Stop the app from running if device binding fails. Otherwise,
dereferencing NULL pointer will happen. This was caught by
Coverity.
Coverity-CID: 151988
Change-Id: I8245d938498a51123249fbd069935900ad660314
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The variable type mismatching was caught by LLVM.
Jira: ZEP-1179
Change-Id: I084406601badc64c257cbdd82b9c8b7509549303
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
