Adds a charge_enable handler to facilitate enabling and disabling
a charge cycle. This deprecates enabling and disable the charge
cycle via the CHARGER_PROP_STATUS property.
Signed-off-by: Ricardo Rivera-Matos <ricardo.rivera-matos@cirrus.com>
Updaye buffer counts and semaphore initial value so that the
Broadcast Audio Source can utilize any use of broadcast
pre-transmissions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The issue with non secure storage system has been fixed
in nrf53_ns platform: https://github.com/zephyrproject-rtos/zephyr/issues/59376
No need workarounds anymore.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The benchmark sample did not contemplate message subscribers. It adds
the msg subscribers and improves the organization of the project.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
The subsys/logging/logger example can be used to demonstrate how to
use SWO for logging. Add a configuration fragment that enables the
logger's SWO backend. The default SWO frequency in this example is set
to 2 MHz to ensure a well-defined output bit rate instead of the
highest possible.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Set the prescaler for the stm32_lp_tick_source lptim node.
When the LPTIM is clocked by the LSE with a prescaler
of 16 (lptim freq at 2048Hz) expecting 2048 for the TICKS_PER_SEC.
When the LPTIM is clocked by the LSE with a prescaler
of 32 (lptim freq at 1024Hz) expecting 1024 for the TICKS_PER_SEC.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Make sure that the flash partition is valid.
With TF-M enabled the storage_partition can be used as memory that is
known to be configured as non-secure flash region.
The slot1_ns_partition partition is only correct when TF-M is built
with BL2 enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Print a finished message, so that it is clear that this in the end
of the sample. This makes it certain that we didn't crash without
output on the last test.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Stop erasing outside of the test partition.
We shouldn't really on this being accesible memory.
This region may be consider as secure when application is non-secure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The is_substring did not work for true substrings, as it
would always compare [0] to [0], so it would return false
for the substring "BC" being in "ABC".
Removed the tolower as it is not necessary and fixes the issue.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Commit adds implementation of the specification
recommendations regarding randomization of
responses on the access layer.
3.7.3.1 Transmitting an Access messages
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The patch updates README with detailed description of the requirements
regarding target devicetree needed to correctly build the sample.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
When commit 5b4f4253c1 introduced
"nordic,qspi-nor" dts binding the sample wasn't aligned to the change.
From that moment the sample started to be filtered out by the Twister.
The patch adds Nordic's compatible to the test filter.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
Enable INPUT_SHELL and INPUT_KBD_MATRIX_STATE by default if the sample
is compiled with CONFIG_SHELL=y. This makes it easier to use the shell
commands in the sample by just enabling the shell and let any help
command turn on automatically.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Update the readme to better describe contents of the sample, which is now
used to showcase the various input device types that LVGL offers.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
The conf and overlay files to properly compile the wifi samples were
omitted for the Xiao_esp32c3 board. I've added those two files and
confirmed that the sample properly compiles and runs.
Signed-off-by: Robert Baruch <robertbaruch@mac.com>
Add const prefix for service uuid and char uuid.
Since Service UUID and Char UUID should not change in the service
definition, they are most reasonably defined as rodata, also for
save some ram footprint.
The field `attr->user_data` type is `void *`, as this PR change
all Service UUID to rodata, so there must add (void *) to avoid warning.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
In preparation of migrating to net_mgmt events, we need to remove
the observer event callback handler.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The espi_saf.h header has a dependency on the eSPI driver supporing SAF.
Guard the include to fix builds of the Nuvoton eval boards.
Signed-off-by: Keith Short <keithshort@google.com>
Enforcing the peer's behavior is not strictly necessary. All the host
should do is make sure it is resilient to a spec-violating peer.
Moreover, a growing number of platforms were disabling the check, as the
spec allows "batching" HCI num complete packets events, stalling ATT RX.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Co-authored-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
This removes the fixed size bt_bap_base, which provides
2 improvements:
1) The RAM usage of the broadcast sink has been reduced.
For the Broadcast Sink sample it is a reduction of 120
octets, but with much better scaling for supporting
more or larger BASEs.
2) The functions to parse BASEs now support arbitrary sized
BASEs, where they were previously restricted by our
local Kconfig options. This allow us to parse any BASE
from a remote device, without encounting memory issues.
We are still memory restricted on the devices we
actually want to sync to.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removes support for the deprecated features of having a prj file
which has the board name on the end of it. Board Kconfig fragments
should be used instead.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds a zephyr,lvgl-keypad-input compatible to the native_posix board
overlay and the required code to control an button matrix widget.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
If server registration fails, allow fallback to secondary server,
or fallback to bootstrap.
Also allow fallback to different bootstrap server.
Add API to tell RD client when server have been disabled by
executable command.
Changes to RD state machine:
* All retry logic should be handled in NETWORK_ERROR state.
* New state SERVER_DISABLED.
* Internally disable servers that reject registration
* Temporary disable server on network error.
* Clean up all "disable timers" on start.
* Select server first, then find security object for it.
* State functions return void, error handling is done using states.
* DISCONNECT event will only come when client is requested to stop.
* NETWORK_ERROR will stop engine. This is generic error for all kinds
of registration or network failures.
* BOOTSTRAP_REG_FAILURE also stops engine. This is fatal, and we cannot
recover.
Refactoring:
* Server selection logic is inside server object.
* sm_handle_timeout_state() does not require msg parameter. Unused.
* When bootstrap fail, we should NOT back off to registration.
This is a fatal error, and it stops the engine and informs application.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
This board have an NXP MPU with 8 configurable regions, of which five
of them are already used by the static MPU configuration. Many of
these tests are failing due to lack of MPU regions or free partition
slots available, even when HW stack protection is disabled when
building with userspace support.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
The LPS28DFW is an ultracompact, piezoresistive, absolute pressure sensor.
Compared to the LPS22DF, the LPS28DFW is waterproof and has a Dual FS
capability and does not have SPI. This commit extends the LPS22DF driver to
be compatible with the LPS28DFW device.
Signed-off-by: Jonas Remmert <j.remmert@phytec.de>
SIG has changed Bluetooth mesh to Bluetooth Mesh
Updating zephyr docs accordingly
Leaving out old release notes
Signed-off-by: Mia Koen <mia.koen@nordicsemi.no>
The b_u585i_iot02a stm32 board has no HTS221 DRDY pin
to trig the HTS221 relative humidity and temperature sensor
So that sample.sensor.hts221.trigger is not applicable.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
in ip_k66f platfrom, we using rtt as debug port,
which is conflicted with usermode. see below:
warning: LOG_PRINTK
(defined at subsys/logging/Kconfig.processing:8)
has direct dependencies !USERSPACE && !LOG_MODE_MINIMAL
&& LOG with value n, but is currently being y-selected
by the following symbols:
- LOG_BACKEND_RTT_FORCE_PRINTK
(defined at subsys/logging/backends/Kconfig.rtt:103),
with value y, direct dependencies LOG_BACKEND_RTT &&
!LOG_FRONTEND_ONLY && !LOG_MODE_MINIMAL && LOG (value: y),
and select condition LOG_BACKEND_RTT &&
!LOG_FRONTEND_ONLY && !LOG_MODE_MINIMAL && LOG (value: y)
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Add a name for the Kconfig choice symbol
indicating the Zbus subscriber buffer allocation
and adjust the name of the existing choices.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Sample readme states that shell inteface is supported
for evaluation. Added missing GPIO_SHELL and SENSOR_SHELL
to Kconfig.
Signed-off-by: Andy Sinclair <andy.sinclair@nordicsemi.no>
The existing npm1300_ek shield overlay has several example
voltage and gpio settings. For many use cases these are
invalid and need to be overridden, or removed with
delete-property.
These example configurations have been moved to a board
specific overlay.
Signed-off-by: Andy Sinclair <andy.sinclair@nordicsemi.no>
Introduce NET_CORE_IMAGE_HCI_IPC Kconfig setting to control inclusion
of HCI IPC image when building through sysbuild.
This allows users with custom netcore applications to avoid inclusion
of the default HCI IPC image.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
