Recently there was added ADI support to periodic advertising.
There was missing implementation of ADI for periodic advertising
chained PDUs and direction finding. Also unit tests for periodic
advertising chains required update to handle ADI field.
The commit provides missing implementation.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The RSSI measurement was not enabled while receiving periodic
advertising. The function responsible for enable the feature
in radio was called, but it was done too early.
It was overwritten by radio_switch_XXX function that assigns
a value to RADIO->SHORTS register.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Adding a KConfig to allow for disabling of the passing of invalid SDUs
through the ISOAL HCI data path.
Defaults to keeping current behavior.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Fix missing auxiliary context release when reception of
Periodic Advertising Chain PDU fails due to header complete
timeout, i.e. no reception of on-air PDU. Also, fix missing
generation of auxiliary reception failure notification when
no auxiliary context was allocated for chain PDU reception.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Advertising LLL header initialization to be done early
so that other functions like Periodic Advertising Parameter
set functions can use LLL context to reference ULL conttext.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move Periodic Advertiser List option check in LE Periodic
Advertising Create Sync command to HCI.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Scan Duplicate Filtering to consider different
advertising mode and multiple advertising set id from same
advertiser Bluetooth device address.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use function to get the set/clear AD data parameter to
populate the common extended payload format field.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated the implementation to allow population of auxiliary
pointer field as necessary to append PDU chains.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing traversal of TargetA field in advertised Common
Extended Payload Format. This will cause invalid offset used
for fields following the TargetA when Extended Directed
Advertising is used.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ASSERTION FAIL [!hdr->disabled_cb] @ ull_conn.c:882
When initiating a connection using continuous scan window
if there is preemption by the next window then the ISR
callback was overwritten to switch to next scan window
instead of the initiator event being closed.
Fixed by not aborting the initiating state when requested
by the next continuous scan window.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use define for maximum number of primary advertising radio
channels used while scanning.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In HCI event, PHY indices start at 1 compare to 0 indexed in
aux_ptr field in the Common Extended Payload Format in the PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor changes to remove redundant whitespaces and to use
uint8_t instead of uint32_t to return true or false.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing reset of LLL scheduling flag when auxiliary PDU
scan scheduled in LLL is aborted due to preemption.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix continuous skipping of Extended Scanning of Auxiliary
PDUs. Due to duplicate prepare events of continuous scanning
present before the auxiliary scanning prepare, preemption
schedules only the primary scan prepare and auxiliary scan
infinitely is postponed.
This is a revert of commit 190532bcc4 ("Bluetooth:
Controller: Only remove duplicate resume events").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implementation to fragment the list of received Extended
Advertising PDUs into HCI LE Extended Advertising report
events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing implementation to setup the PDU radio end
timestamp capture for Scan Response PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use variable names lll and lll_aux for struct lll_scan and
struct lll_scan_aux respectively.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to check auxiliary PDU device address
match by comparing the address in the AUX_ADV_IND PDU with
the addresses in the filter accept list.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the filter check function so that it can be reused
for the Extended Auxiliary PDU filtering.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor move of lll_scan_aux_isr_aux_setup function alongwith
other global functions in the file.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implement setting the correct directed advertisers address
type in the Extended Advertising Report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to filter using access list the received
extended auxiliary PDUs. Use resolving list addresses when
resolving list is enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended scanning filter implementation to permit
ADV_EXT_IND PDUs without AdvA so that AUX_ADV_IND PDU can
be received and to filter that PDU based on whether AdvA
is present.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Advertising Report data status to have
"Incomplete, data truncated, no more to come" when data
length is more than "Scan_Max_data".
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Cleanup the scan event LLL done handling for abort on late
schedule, preemption pipeline abort, preemption current
event yield, duration expire, and connection establishment.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use 32-bit value variables when calculating Extended
Advertising and Periodic Advertising radio event time
reservations to consistently use 32-bit variables for
microsecond time units when calculating radio event where
there is possibility to reserve for scheduling of back to
back chained PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Dequeue and scheduling IQ samples report towards host
was working by accident. IQ samples were casted to
pointer to struct pdu_adv. Then type of PDU was checked.
Fortunately the IQ samples hadn't got PDU_ADV_TYPE_EXT_IND
in memory pointed by struct pdu_adv->type.
NODE_RX_TYPE_IQ_SAMPLE_REPORT must have separate execution
path in rx_demux_rx.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
There were no assignment to iq_report->hdr.handle in the code
hence all IQ samples reports had the same handle value which
was zero.
Since the handle is related with ll_sync_set pointer the handle
value may not be set in LLL.
The best place to set handle value is thread context where
bt_hci_evt_le_connectionless_iq_report is prepared.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Previously the host would handle disconnecting associated CISes and
invoking callbacks when a host ACL conn was disconnected.
This responsibility has now been moved to the controller, which needs to
send a NODE_RX_TYPE_TERMINATE with the CIS handle for proper
disconnection in the host. This is in accordance with the spec.
As disconnect reason, the CIS uses the ACL reason, which is passed to
the host along with the handle.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix BT_CTLR_LOW_LAT_ULL_DONE synchronization counting so
that done events are processed before pipeline enqueue
decisions are taken in LLL.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
