Looks like switching the main return value to int means that stack
frame persists and increases stack usage by a few bytes. Increase the
main stack size to avoid overflows.
Signed-off-by: Keith Packard <keithp@keithp.com>
As both C and C++ standards require applications running under an OS to
return 'int', adapt that for Zephyr to align with those standard. This also
eliminates errors when building with clang when not using -ffreestanding,
and reduces the need for compiler flags to silence warnings for both clang
and gcc.
Most of these changes were automated using coccinelle with the following
script:
@@
@@
- void
+ int
main(...) {
...
- return;
+ return 0;
...
}
Approximately 40 files had to be edited by hand as coccinelle was unable to
fix them.
Signed-off-by: Keith Packard <keithp@keithp.com>
The init infrastructure, found in `init.h`, is currently used by:
- `SYS_INIT`: to call functions before `main`
- `DEVICE_*`: to initialize devices
They are all sorted according to an initialization level + a priority.
`SYS_INIT` calls are really orthogonal to devices, however, the required
function signature requires a `const struct device *dev` as a first
argument. The only reason for that is because the same init machinery is
used by devices, so we have something like:
```c
struct init_entry {
int (*init)(const struct device *dev);
/* only set by DEVICE_*, otherwise NULL */
const struct device *dev;
}
```
As a result, we end up with such weird/ugly pattern:
```c
static int my_init(const struct device *dev)
{
/* always NULL! add ARG_UNUSED to avoid compiler warning */
ARG_UNUSED(dev);
...
}
```
This is really a result of poor internals isolation. This patch proposes
a to make init entries more flexible so that they can accept sytem
initialization calls like this:
```c
static int my_init(void)
{
...
}
```
This is achieved using a union:
```c
union init_function {
/* for SYS_INIT, used when init_entry.dev == NULL */
int (*sys)(void);
/* for DEVICE*, used when init_entry.dev != NULL */
int (*dev)(const struct device *dev);
};
struct init_entry {
/* stores init function (either for SYS_INIT or DEVICE*)
union init_function init_fn;
/* stores device pointer for DEVICE*, NULL for SYS_INIT. Allows
* to know which union entry to call.
*/
const struct device *dev;
}
```
This solution **does not increase ROM usage**, and allows to offer clean
public APIs for both SYS_INIT and DEVICE*. Note that however, init
machinery keeps a coupling with devices.
**NOTE**: This is a breaking change! All `SYS_INIT` functions will need
to be converted to the new signature. See the script offered in the
following commit.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
init: convert SYS_INIT functions to the new signature
Conversion scripted using scripts/utils/migrate_sys_init.py.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
manifest: update projects for SYS_INIT changes
Update modules with updated SYS_INIT calls:
- hal_ti
- lvgl
- sof
- TraceRecorderSource
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: devicetree: devices: adjust test
Adjust test according to the recently introduced SYS_INIT
infrastructure.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: kernel: threads: adjust SYS_INIT call
Adjust to the new signature: int (*init_fn)(void);
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
HiFive Unmatched is using size and address cells of length 2. It has to
use different overlays (with reg properties of correct length).
Signed-off-by: Franciszek Zdobylak <fzdobylak@antmicro.com>
When building this test with the armclang compiler we get the following
warning:
tests/kernel/interrupt/src/dynamic_isr.c
tests/kernel/interrupt/src/dynamic_isr.c:23:32: error: 'used' attribute
ignored on a non-definition declaration [-Werror,-Wignored-attributes]
extern struct _isr_table_entry __sw_isr_table _sw_isr_table[];
^
There is no need to add the __sw_isr_table on the extern, so remove it
to address the warning.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Clang complains when an unsigned value is passed to abs, even though there
is an implicit cast to a signed type. Insert an explicit cast to make clang
happy.
Signed-off-by: Keith Packard <keithp@keithp.com>
TC_START is used to evaluate output of tests and is used internally by
ztest when a test starts, no need to call this manually here.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
TC_START is used to evaluate output of tests and is used internally by
ztest when a test starts, no need to call this manually here.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
TC_START is used to evaluate output of tests and is used internally by
ztest when a test starts, no need to call this manually here.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Nordic targets use 24-bit RTC peripheral for system clock. Nordic system
clock timeout implementation relies on RTC CC (capture compare) when
the timeout is in future. Nordic system clock driver allows setting
alarm only to 3 or more counts from current counter value due to silicon
limitation (to ensure that CC event triggers before counter overflow).
RTC CC limitation does not have much impact on normal applications where
there is no need to schedule such short timeouts, but is problematic in
a timer test that expects being able to repeatedly schedule timeouts on
subsequent ticks.
Reduce system tick rate to 8192 on nRF targets to allow setting CC to
the very next tick. With system tick rate being 4 times less than the
hardware tick rate, it is always possible to schedule timeout to happen
in the next tick because ticks are 4 counts apart, i.e. current timer
value + 3 never runs past the next tick.
Fixes: #54211
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
This commit marks testcases that require working Power Managament with
the appropriate `pm` tag to allow proper testcase filtering in the board
YAML file.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
SMP tests `inc_concurrency` and `smp_switch_torture` use a 'stressing'
approach to verify their results: run something for some time (or some
number of repetitions). However, in some environments, current 'stress'
levels can be quite high, making tests take a long time - environments
like emulators/simulators.
This patch adds a Kconfig that allows one to define a percentage factor
to the 'stress' (time or repetitions) used by these tests.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
If there are any CPU exceptions, printing a failed message
would allow twister to stop early instead of waiting for
timeout.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If there are any CPU exceptions, printing a failed message
would allow twister to stop early instead of waiting for
timeout.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The variable need_recover_spinlock is always set to false so
the spinlock recovery code is effectively no-op. So remove
everything related to the variable.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
A new Z_SPIN_DELAY() macro has been added which
can be used to reduce a bit the amount of noise
due to the POSIX arch need to break busy loops with
k_busy_wait().
Use it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Don't sample the first entry outside the timer as this is a different
code path which produces a different offset from the clock tick.
Use sys_clock_hw_cycles_per_sec() to be compatible with systems that
read their hardware clock frequency at run time.
Perform cycle difference computations with uint64_t. If ever the
magnitude of the absolute clock cycle values is greater than 52 bits
then the cast to a double will actually lose accuracy.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Adds REQUIRED to samples and tests for finding the zephyr package
to align all samples and tests with the same call and parameters.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
An assertion statement was a bit too strict. Period drift may come about
not only from kernel ticks being large but also from time conversion being
inexact due to division truncation.
Fixes: #55136
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
For some kernel tests, faults and exceptions are expected.
They are caught and the test would continue if the reasons
for faults are as expected. However, when the unexpected
reasons are encountered, the code simply prints a message
and calls k_fatal_halt(). When running under twister,
these messages are not the expected failed messages so
twister will spin till timeout although the execution
has already been halted. This adds another printk() before
halt to signal twister that the test has failed and bails
early.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
...test_inherit_resource_pool. This waits for the newly created
threads to finish before moving on to the next test. This fixes
an issue on qemu_x86_tiny where there would be a double fault
after all tests have run.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
qemu_x86 seems to take an extra instruction after the sti instruction
(irq_unlock) happens before it posts the interrupts. This can issues
if the instruction after the sti ends up reading the state that is
suppose to be updated by the ISR handler.
We see this behavior when building with LLVM. To workaround this issue
we add an arch_nop() to provide an extra instruction to allow the
interrupts to post.
Opened zephyrproject-rtos/sdk-ng#629 to track qemu issue.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
LLVM doesn't support SSE + 387 math. As such if SSE is enabled we
have to utilize SSE floating point. To utilize 387 math, SSE has
to be disabled.
Update the floating point related tests to introduce 387 only variants
that will build on both GCC & LLVM based tools. Than we exclude llvm
based (llvm, oneApi) toolchains from the CONFIG_X86_SSE_FP_MATH=n and
CONFIG_X86_SSE=y test variants.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Looks like some implementors decided not to implement the full set of
PMP range matching modes. Let's rearrange the code so that any of those
modes can be disabled.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This test relies on one thread interrupting another to exercize the FPU
sharing. On SMP those threads get one CPU each with no sharing of their
FPU making the test rather pointless.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Fix comments in board DTS files referring to AN521 tables defining
memory areas, and choose node label names that more accurately reflect
the entries of interest in those tables.
Adjust the one in-tree user of the affected node labels.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
When building with LLVM on qemu_x86 we see the compiler ends up
inlining the check_input function. This breaks the stack overflow
that the test is trying to generate, so mark the check_input()
function as noinline to fix the issue.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Provide an estimate of the test duration.
Make the output nicer than a few overloaded and wrapped lines.
Provide more context in the presence of period time drift.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Print the "perfect" reference period for easier evaluation.
Suggest a remedy to the missed ticks problem.
Still, that wasn't satisfactory. Implemented a count of missed ticks
to get to the bottom of this issue. Found that missed ticks always came
to a perfect count of 40.
Incidentally, the busy loop prints a line every 250 ms and the test spans
10 seconds. There are no such coincidences.
Turns out that CONFIG_PRINTK_SYNC was set by default. This disables IRQs
for the serial output duration, which can be quite long at 115200 bauds.
Given a 60-ish character line length, this represents more than 5 ms of
no IRQ servicing during a timer latency measurement test which is bad.
So make sure CONFIG_PRINTK_SYNC=n for proper statistics.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Disable tests/kernel/mem_protect/syscalls for qemu_arc_em where
we trigger ARC QEMU bug which cause illegal instruction exception
on perfectly valid ARC code.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Change expected reason code for cpu exception to be generic and
in compliance with a3774fd51aFixes#54335
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
This test has trouble on qemu_x86_tiny and randomly generates a Double
Fault error. I couldn't get it to reliably run with picolibc as a Double
Fault usually occured before the test completed.
I spent a couple of hours attempting to track this down and found that it
happens when code pages for the main thread get unmapped because the
qemu_x86_tiny intentionally offers very few available PTEs.
Work around this by just using the minimal libc for this test.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tune quantum parameter for selected kernel tests
targetting the HiFive Unleashed platform.
Those tests require higher fidelity of the virtual
time flow which is achievable on multi-core platforms
in Renode by reducing the quantum.
Signed-off-by: Jan Malek <jmalek@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
With lazy FPU context switching, k_float_disable() is merely triggering
a synchronous FPU context save and k_float_enable() is a no-op.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
After the dbe3874079 - (tests: kernel/smp: wait for threads to exits
between tests) I've started seeing sporadic kernel.multiprocessing.smp
test failures on our platforms.
------------------------------->8---------------------------------
[*snip*]
===================================================================
START - test_fatal_on_smp
E: r0: 0x3 r1: 0x0 r2: 0x0 r3: 0x0
E: r4: 0x80000194 r5: 0x0 r6: 0x0 r7: 0x0
E: r8: 0x800079c4 r9: 0x82802 r10: 0x80008d8c r11: 0x8000dad8
E: r0: 0x3 r1: 0x2712 r2: 0x114 r3: 0x0
E: r4: 0xf4240000 r5: 0x0 r6: 0xf424 r7: 0xbe40
E: r8: 0x2540 r9: 0x0 r10: 0x80008d8c r11: 0x8000db8c
E: r12: 0x8000ddf0 r13: 0x0 pc: 0x80000aec
E: blink: 0x80000ae6 status32: 0x80082002
E: >>> ZEPHYR FATAL ERROR 3: Kernel oops on CPU 0
E: Current thread: 0x8000db8c (test_fatal_on_smp)
E: r12: 0x8000ddf0 r13: 0x0 pc: 0x8000019a
PASS - test_fatal_on_smp in 0.014 seconds
===================================================================
START - test_get_cpu
E: blink: 0x80001490 status32: 0x80082002
E: >>> ZEPHYR FATAL ERROR 3: Kernel oops on CPU 1
E: Current thread: 0x8000dad8 (unknown)
------------------------------->8---------------------------------
The rootcause if that we doesn't proper cleanup resources after
test_fatal_on_smp test case. So child thread we start test_fatal_on_smp
may continue running for some time after the test_fatal_on_smp
test case is finished.
As in the next test case (test_get_cpu) we use same thead structures
again to create new child thread we may actually rewrite some data of
thread which is still running (or vise versa).
As we trigger the crash in test_fatal_on_smp we can't simply join
child thread in the end of test case (as we never get here). We can't
simply use join child thread before we initiate crash in test_fatal_on_smp
either as we don't want to introduce reschedule point here which may break
the test logic.
So, to fix that, we'll just do k_busy_wait in test_fatal_on_smp
thread after we start child thread to wait for thread trigger
exception and being terminated.
To verify that we also assert that child thread is dead by the
time when we stop busy waiting.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Use namespacing with extra_configs in some tests and remove duplicated
scenarios the were made arch or platform specifc.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds a check for `K_ERR_ARM_USAGE_ILLEGAL_EPSR` as the reason code
when running this test for `CONFIG_ARMV7_M_ARMV8_M_MAINLINE`.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Fix all line-length errors detected by yamllint:
yamllint -f parsable -c .yamllint $( find -regex '.*\.y[a]*ml' ) | \
grep '(line-length)'
Using a limit is set to 100 columns, not touching the commandlines in
GitHub workflows (at least for now).
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
