Changed poll to perform incoming data check with connected
DTLS connections. This allows the CONFIG_NET_SOCKETS_DTLS_TIMEOUT
to timeout the connections to server socket if there is no
incoming data.
Previously, if the remote client closed the DTLS connection without
close notify, the timeout of the ongoing connection only happened
when next connection was taken to the server socket. Depending on
the timeouts, this could prevent the next connection from succeeding.
Signed-off-by: Markus Lassila <markus.lassila@nordicsemi.no>
WIFI scan result shows junk character in SSID because of
the length of ssid is maximum(32 character) which leads
to buffer overflow. It required one character for null
terminator ‘\0’.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Previously, there was no way to determine maximum number of bytes
that can be allocated using only net_buf structure. This commit
introduces such field.
Moreover, this commit fixes an issue where allocation of less than
maximum number of bytes from a fixed buffer pool would set buffer's
size to this number instead of the whole buffer size.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
As defined in IEEE802.1AS-2020 ch. 10.2.12.2.1, the port identity
of an MDSyncSend structure sent from a port shall be set to the
port identity of the sending port according to and ch. 8.5.2.
This commit replaces the port identity before forwarding a sync.
Fixes#68385
Signed-off-by: Manuel Schappacher <manuel.schappacher@hs-offenburg.de>
If recvmsg() does not update control data, then it must
set msg_controllen length to 0 so that the caller can
understand this.
Fixes#68352
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
In case zperf session was aborted by the user (by for instance stopping
it from shell), or practically in case of any other
communication-related error, the zperf session could end up in a state
other than NULL or COMPLETED, with no way to recover. This made the
session no longer usable and eventually could lead to zperf being not
able to start a new session anymore.
Fix this by introducing zperf_session_reset() function, which resets the
session state back to defaults. The function is called when the zperf
receiver service is stopped.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The issues found for UDP receiver were also identified for TCP receiver,
this commit applies practically the same set of changes as in case of
UDP.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit fixes restarting of UDP receiver service, along with some
other minor cleanups:
* The core issue was udp_server_running flag not being cleared when
service was stopped. Fix this by introducing udp_receiver_cleanup()
which does all of the required cleanups when receiver service is
stopped. The function is called either when the application stopped
the service with zperf_udp_download_stop(), or when the service was
stopped due to error.
* net_socket_service_unregister() was not called on
zperf_udp_download_stop(), but only from the service callback - that
would not work in case there's no active communication.
* at the same time, net_socket_service_unregister() would be called from
the service callback in case of errors. Fix this, by making
udp_recv_data() only return an error, and let the service callback to
do the cleanup.
* Remove no longer used udp_server_run semaphore
* Remove udp_server_stop - with socket services it seems no longer
needed.
* zperf_udp_receiver_init() now returns an error, so that we don't
mark the service as running in case of socket/services error.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add sockaddr member in struct net_pkt to store peer address if offloaded
network inteface is used. This enables recvfrom() to fill in src_addr if
socket type is UDP and offloaded interface driver supports it.
Signed-off-by: John Johnson <john.filip.johnson@gmail.com>
DHCPv4 server will send an ICMP probe (echo request) for the requested
address before replying with DHCP Offer, unless probing is disabled in
Kconfig.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Additionally, replace the local print(sh, level, fmt, ...) macros
with PR, PR_ERROR, and PR_WARNING macros.
Then remove the print(sh, level, fmt, ...) macros.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Replaced direct shell_fprintf calls with PR, PR_ERROR, PR_INFO
and PR_WARNING macros.
This change simplifies the code by using predefined macros.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Moved 'scan_result' from a standalone variable into the 'context' struct
to enhance code optimization.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This commit introduces a local variable 'sh' to store 'context.sh' for
use with the 'shell_fprintf' function.
By doing so, we avoid the repeated dereferencing of 'context.sh',
thereby reducing the code footprint.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This commit introduces a new IPv6 API for positive reachability
confirmation, as specified in RFC 4861, Section 7.3.1. This feature aims
to enhance the effectiveness of the Neighbor Discovery mechanism, by
enabling upper-layer protocols to signal that the connection makes a
"forward progress".
The implementation within TCP serves as a reference. Compliance with
RFC 4861, especially Appendix E.1, was ensured by focusing on reliable
handshake and acknowledgment of new data transmissions.
Though initially integrated with TCP, the API is designed for broader
applicability. For example, it might be used by some UDP-based protocols
that can indicate two-way communication progress.
Signed-off-by: Łukasz Duda <lukasz.duda@nordicsemi.no>
We cannot always start the service monitor thread statically
because the static threads are started after the application
level. This means that when config library wants to start
dhcpv4 server which uses socket services, there would be a
deadlock. Simplest solution is to start the service thread
directly from socket service init function.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Not only check if the address pool belongs to the same subnet as the
server, but also that it does not overlap with the server address -
otherwise the server might end up assigning its own address.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As connectivity backends need to be bound in the same file that the
`net_if` is created in, define a common backend type for WiFi modems.
All WiFi modems should be controllable through the `wifi_mgmt` API, so
there should be no need for dedicated context.
When enabled, the particular implementation to be used is chosen through
`CONNECTIVITY_WIFI_MGMT_IMPL`. For now, the only choice is an
application defined backend.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
For a Wi-Fi station the connect API supports both band and channel
configuration, but for a shell command either channel or band makes
sense, so, overload the channel field to support band.
Rejig the band and channel validation to support all modes.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Adds an option to disable the automatic initialization of the default
dns_context. This lets applications use the default context, while also
managing the `init` and `close` functions.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
ICMPv4/6 modules print error when ICMP message handling fails, which
includes no message handler registered. This is a bit problematic, as
there are many ICMP messages that Zephyr does not process, and every
time such a message is received, an error log is printed (which wasn't
the case before ICMP rework).
Restore the old behavior (no log on unrecognized ICMP message) by
explicitly filtering out ENOENT error code from printing error. That
way, log will only be printed if an error occured within the actual
message handler.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As discussed during DHCPv4 server integration, group DHCPv4 client files
with DHCPv4 server in a single lib directory.
Renamed internal "dhcpv4.h" header to "dhcpv4_internal.h" so that it's
not confused with the public "dhcpv4.h" header.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The net-shell printed virtual interface name so that it got
the impression it was the network interface name which is not
correct. Now the name is printed as "Virtual name" which is
unambiguous.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If IPv6 is not enabled for the interface, then do not try to
join the IPv6 solicited multicast address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The ratio between mbps and kbps, kbps and bps should be 1000, instead of
1024, as common sense.
The wrong ratio will decrease the Zperf throughput result.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Make sure that scan band string is properly terminated when
parsing user supplied string.
Fixes: #67944
Coverity-CID: 342930
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When ENABLED flag is used, we generate 32 byte DTLS
Connection Identifier and include that in our
DTLS Client HELO. This has no benefit as client only
has one connection toward the server, it does not need
any identification.
When SUPPORTED flag is used, we just include
zero length Connection Identifier in the handshake,
which tell server that we support Connection Identifier
and server can generate one for it.
We then use the CID in the packets that we send towards
server, but response packets don't contain any CID.
This gives all the benefit of CID as server is able to
identify us even when NAT mapping have changed.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add command to query to WiFi driver/firmware revision. The API is expected
to return the firmware revision and driver version as a string, and can be
used by the user to determine what revision of the WiFi driver is in use.
Signed-off-by: Sandip Dalvi <sandip.dalvi@nxp.com>
Instead of relaying on those macros having been defined
somewhere else let's define them for this file.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Now that we are using the shell macro to enforce argument count check,
both mandatory and optional arguments, these additions checks are
unnecessary.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Add macro that allows registration of initialization functions that
are called when LwM2M engine starts.
On LwM2M engine starts up, it first executes all initialization
functions in following priority order:
1. LWM2M_PRIO_ENGINE
2. LWM2M_PRIO_CORE, this is where all LwM2M core objects are initialized
3. LWM2M_PRIO_OBJ, this is where all other objects are initialized
4. LwM2M_PRIO_APP, application initialization.
Now on the initialization phase, we could rely that certain objects have
already been registered.
For example custom objects can register callbacks to core objects.
On application phase, we can initialize sensor objects and register
their callbacks because objects have already been initialized.
This LWM2M_ON_INIT() should replace all use of SYS_INIT()
with the default CONFIG_KERNEL_INIT_PRIORITY_DEFAULT.
Priority order is actually just alphabetical order of names, so
the order is set on a linkin phase, and we don't need any
runtime checking for it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Remove TX-Injection and Promiscuous mode setting from Wi-Fi mode shell
command. These commands are being moved to ethernet l2 layer
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
This set of changes brings in raw packet tx injection mode
feature to ethernet and removes it from being a Wi-Fi only feature.
It was earlier envisaged as Wi-Fi net management feature only.
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
If bootstrap fails, RD client will call lwm2m_engine_stop()
which will close the context.
The socket loop, however still contains a call to
hint_socket_state(context, NULL) which has a null pointer now.
Fix the segfault by allowing nullpointer on hint_socket_state().
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Implement DHCPv4 shell module, which allows to start/stop DHCPv4 server
operation, and print server status (address leases).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Increase socket services thread default stack size when DHCPv4 server is
enabled, as it uses synchronous processing.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So that it's possible to register ARP entries manually. Needed for DHCP
server implementation, which in unicast mode needs to reply to an IP
address that is not registered on the peer interface yet (hence no ARP
reply will be sent). It's needed to add an ARP entry manually in that
case, as hardware address is already known at that point.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new kconfig CONFIG_LWM2M_QUEUE_MODE_NO_MSG_BUFFERING.
When enabled and device is sleeping, Reqistration Update
message is skipped and messages from send operation and
notifications are sent right away.
Reqistration update message is also skipped when
lwm2m_engine resumes from pause state.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
L2 PPP is not able to handle the carrier being lost gracefully,
nor is it able to gracefully close the PPP connection when
net_if_down() is called.
This patch refactors the L2 PPP module to use the carrier state
to either properly close or simply terminate the PPP connection.
Additionally, it ensures that the PPP session is closed properly
before calling ppp->stop().
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
