This update the echo_client configurations for the atsamr21_xpro board
to match same configs defined at echo_server.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
In the Zephyr v3.5 to build the net samples pair echo-server/client the
SRAM requirements increased for the atsamr21_xpro board when passing
-DEXTRA_CONF_FILE=overlay-802154.conf argument. This adjusts example
features to free necessary SRAM to build and run the example.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
A growing number of CAN controllers do not have support for individual RX
hardware filters based on the Remote Transmission Request (RTR) bit. This
leads to various work-arounds on the driver level mixing hardware and
software filtering.
As the use of RTR frames is discouraged by CAN in Automation (CiA) - and
not even supported by newer standards, e.g. CAN FD - this often leads to
unnecessary overhead, added complexity, and worst-case to non-portable
behavior between various CAN controller drivers.
Instead, move to a simpler approach where the ability to accept/reject RTR
frames is globally configured via Kconfig. By default, all incoming RTR
frames are rejected at the driver level, a setting which can be supported
in hardware by most in-tree CAN controllers drivers.
Legacy applications or protocol implementations, where RTR reception is
required, can now select CONFIG_CAN_ACCEPT_RTR to accept incoming RTR
frames matching added CAN filters. These applications or protocols will
need to distinguish between RTR and data frames in their respective CAN RX
frame handling routines.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
If accept() returns an error, it typically means that the
system is running out of resources. In this case sleep
some time in order the system to cool down a bit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If accept() returns an error, it typically means that the
system is running out of resources. In this case sleep
some time in order the system to cool down a bit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Update coap_service_send and coap_resource_send to take an optional
pointer argument to the newly introduced coap_transmission_parameters.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
In preparation of migrating to net_mgmt events, we need to remove
the observer event callback handler.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
in ip_k66f platfrom, we using rtt as debug port,
which is conflicted with usermode. see below:
warning: LOG_PRINTK
(defined at subsys/logging/Kconfig.processing:8)
has direct dependencies !USERSPACE && !LOG_MODE_MINIMAL
&& LOG with value n, but is currently being y-selected
by the following symbols:
- LOG_BACKEND_RTT_FORCE_PRINTK
(defined at subsys/logging/backends/Kconfig.rtt:103),
with value y, direct dependencies LOG_BACKEND_RTT &&
!LOG_FRONTEND_ONLY && !LOG_MODE_MINIMAL && LOG (value: y),
and select condition LOG_BACKEND_RTT &&
!LOG_FRONTEND_ONLY && !LOG_MODE_MINIMAL && LOG (value: y)
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
For several samples that today have native_sim
enabled, enable them also for native_sim.
And set native_sim as default integration_platform
instead of native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Enable native_sim in the sample yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Enable native_sim in the sample yaml, and switch
integration_platform
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide overlays for native_sim
* Enable native_sim in the sample yaml
* Remove native_posix from the sample yaml platform_allow as it was
filtered out by the host libC
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's replace the references to native_posix with native_sim.
Background: during this release native_sim is replacing
native_posix as the main host test/development platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
When connection manager (CONFIG_NET_CONNECTION_MANAGER) is disabled,
application starts right away. Scenario that it covers is when static
networking is used, like with emulators (QEMU, Native Sim, ...).
Since 'connected' flag was not set in such scenario, the internal loop
inside start_client() has ended up early and stop_udp_and_tcp() was called
quickly after starting TCP and UDP clients.
Set 'connected = true', when connection manager is disabled, so that it is
assumed that connection is working for the whole duration of the
echo-client sample.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Instead of forcing use of NEWLIB_LIBC, select any available complete C
library implementation. Add CONFIG_REQUIRES_FLOAT_PRINTF and adjust
CONFIG_LIBC_MALLOC_ARENA_SIZE as needed.
Signed-off-by: Keith Packard <keithp@keithp.com>
The sample enables CONFIG_NET_IPV4_MAPPING_TO_IPV6 and then
turns off IPV6_V6ONLY option which allows it to support both
IPv6 and IPv4 using the same socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The old Makefiles which can be used to build this samples
directly as Linux apps and the description in the READMEs
could be quite missleading.
Building this apps in this way has nothing to do with the
Zephyr native_posix/sim targets. This is about building
them as actual Linux applications without Zephyr or any
HW models.
So let's rename the Makefiles and change the description
in the docs to avoid confusion.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
rand32.h does not make much sense, since the random subsystem
provides more APIs than just getting a random 32 bits value.
Rename it to random.h and get consistently with other
subsystems.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The conn_mgr_monitor.h was not included so the compilation
gave warning for missing conn_mgr_ignore_iface() function.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
mps2_an385 was excluded from networking tests, therefore can no longer
be used as an integration platform. Replace it with qemu_x86.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Update the TLS part of the big_http_download sample to reference the
currently used server used for file download.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The download server that the origin server redirects to seems now to
use different certificate (signed by a different root CA). Therefore
add the additional root CA to the certificate list and refactor the
sample code a bit to allow to easily extend/replace certificates in the
future.
Bump the mbed TLS heap size a bit to accommodate the extra registered
certificate.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Use the new code-sample directive and roles to document the networking
samples so that they show up as "Related samples" when browsing the
various relevant networking APIs.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The connectivity monitoring subfeature of conn_mgr is currently also
named conn_mgr, which is confusing.
This commit renames it to conn_mgr_monitor, or conn_mgr_mon for short,
for clarity.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
CONFIG_COVERAGE has been incorrectly used to
change other kconfig options (stack sizes, etc)
code defaults, as well as some samples behaviour,
which should not have dependend on it.
Instead those should have depended on COVERAGE_GCOV,
which, being the one which adds special code and
temporary RAM storage for embedded targets,
require changes to many features.
When building for the native targets, all this was
unnecessary.
=> Fix the dependency.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Use 64bit timestamps from k_uptime_get() so they don't
roll over during the expected device lifetime.
Fixes#60826
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The IEEE 802.15.4 API and networking subsystem were using several
inconsistent timestamp resolutions and types. This change defines all
timestamps with nanosecond resolution and reduces the number of
available types to represent timestamps to two:
* `struct net_ptp_time` for PTP timestamps
* `net_time_t` for all other high resolution timestamps
All timestamps (including PTP timestamps) are now referred to a
"virtual" local network subsystem clock source based on the well-defined
types above. It is the responsibility of network subsystem L2/driver
implementations (notably Ethernet and IEEE 802.15.4 L2 stacks) to ensure
consistency of all timestamps and radio timer values exposed by the
driver API to such a network subsystem uptime reference clock
independent of internal implementation details.
The "virtual" network clock source may be implemented based on arbitrary
hardware peripherals (e.g. a coarse low power RTC counter during sleep
time plus a high resolution/high precision radio timer while receiving
or sending). Such implementation details must be hidden from API
clients, as if the driver used a single high resolution clock source
instead.
For IEEE 802.15.4, whenever timestamps refer to packet send or receive
times, they are measured when the end of the IEEE 802.15.4 SFD (message
timestamp point) is present at the local antenna (reference plane).
Due to its limited range of ~290 years, net_time_t timestamps (and
therefore net_pkt timestamps and times) must not be used to represent
absolute points in time referred to an external epoch independent of
system uptime (e.g. UTC, TAI, PTP, NTP, ...).
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
This is no longer necessary, as this option is selected as a dependency
for class implementations where it is required.
Also remove redundant test cases.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
In case UDP is disabled, init_udp() is not compiled and the build
fails. Fix this, by providing dummy implementations for UDP functions,
in case UDP is disabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
All application level TLS operations should be guarded with
"#if defined(CONFIG_NET_SOCKETS_SOCKOPT_TLS)" and not mbed TLS configs
only. Otherwise, in case mbed TLS is enabled, but the sample is not
configured to use TLS (hence TLS credential library is not available
for example), the build may fail or produce spurious warnings.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
websocket_disconnect api does not closes user tcp socket, so tcp socket
must be closed after done.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
This commit replaces the workarounds spread around the
drivers and subsystems with the updated PPP L2
interface.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
Remove usage of Kconfig symbol `CONFIG_BT_DEBUG_LOG` from samples. It
has been deprecated since this PR:
https://github.com/zephyrproject-rtos/zephyr/pull/56183
The Kconfig symbols has been replaced by `CONFIG_LOG=y` on most of the
cases. Or it has been removed when not needed anymore.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
send_simple_coap_request needs to return a result from previous functions
instead of success at the end of the function. Without doing so the example
may wait for a response from a coap sever when a message failed to send.
Signed-off-by: Matthew Bradbury <matt-bradbury@live.co.uk>
conn_mgr now allows applications to request that ifaces be ignored.
This commit changes the echo_server sample to use this feature to
filter out the tunnel iface, instead of manually filtering events
generated by it.
This will allow the echo_server sample to remain compatible with
planned changes to conn_mgr, namely a switch from events being
fired for every individual iface that goes up or down, to only
being fired when connectivity is gained or completely lost.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Since conn_mgr is a subsystem rather than a library, relocate it
directly into subsys/net rather than subsys/net/lib/
Rename header files to better match their function.
Remove net_ prefix from conn_mgr types, API, and files, since it is
unnecessary.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Now that the nrf52 HW models support it,
let's use their flash model instead of falling back
to the openthread RAM settings backend.
Note that the flash model defaults to just keeping the
flash content in the Linux process heap.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Extend the sample to be built with native_posix
prevent issues like #57133 in the future. Also extends the qemu
build to build a "raw" configurationw without POSIX_API or
NET_SOCKETS_POSIX_NAMES.
Signed-off-by: Hein Wessels <heinwessels93@gmail.com>
Fixes the compiler error that occurs when attempting to build
the SNTP library with CONFIG_NET_SOCKETS_POSIX_NAMES=n, while
using native_posix.
Closes#57133
Co-authored-by: Chris Friedt <cfriedt@meta.com>
Signed-off-by: Hein Wessels <heinwessels93@gmail.com>
