Address and size are given by the DTS register property
of the qspi nor : to be used by the qspi driver.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Address and size are given by the DTS register property
of the ospi nor : to be used by the ospi driver.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Support SFDP probe in flexspi nor driver. This probe will allow the
flash driver to dynamically configure quad spi flashes for 1-4-4 mode,
expanding the flash chips supported with this driver.
The following data is read from the SFDP header:
- quad enable method
- fast read command (1-4-4 is maximum supported)
Fixes#55379
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support for reclocking the FlexSPI on NXP iMX RT10XX. This
functionality requires an SOC specific clock function to set
the clock rate, since the FlexSPI must be reset directly
before applying the new clock frequency.
Note that all clock constants are defined in this commit, since the
memc flexspi driver now depends on a clock node being present.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
For the flash driver, the base address is the MCU internal flash
address (usually 0x8000000). This PR gets the that address
from the device tree node "st,stm32-nv-flash"
instead of relying on the CONFIG_FLASH_BASE_ADDRESS
which might differ when building for another flash memory.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This file uses several functions which are extensions to the the
std C library. Let's explicity select one of the extensions
which includes it instead of relaying on somebody having
set it for this file somewhere else.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The implementation uses the same approach as STM32F1x.
Program/erase speed can be set by setting 'write-block-size' flash
property to 1, 2, 4 or 8.
Signed-off-by: Patryk Duda <patrykd@google.com>
Provide different loop delays to `wait_until_ready` based upon the
operation that we are waiting for.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Don't monopolise the CPU in `spi_nor_wait_until_ready`. For slow flash
chips, operations can take minutes (Full chip erase on MX25R is listed
as 120s typical, 240s max).
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This commit updates the driver to use the flash layout pages,
rewriting it to utilize the flash_page_layout.c driver to
avoid duplicate code.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Adjusted the code to guarantee resource release irrespective of operation
success or failure.
Fixes#67336
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This is a follow-up to commit ea1be7f242.
After the driver performs its initialization, it needs to deactivate
the QSPI peripheral. Otherwise, the peripheral would unnecessarily
consume power until some QSPI operation is performed (and only then
it will get deactivated), what depending on the application may take
a significant amount of time.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Added Kconfig assignment of qspi timeout.
Per nrfx v3.2 addition of qspi timeout in config
struct.
Signed-off-by: Kelly Helmut Lord <kellyhlord@gmail.com>
This fix adds the STM32L4P5xx to the list of devices that have an
offset-to-page shift calculation of 12 bits. Previously, the driver
would only shift the offset by 11 bits when calculating the page to
erase.
This would prevent the driver from erasing the correct page.
Signed-off-by: George Beckstein <george.beckstein@ampaworks.com>
Erase operation with block of 64KByte
larger size than the default 4K sector size
if the flash supports.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
When Bluetooth is enabled, it is required to arbitrate flash accesses
between RF and write accesses (for user activity).
A dedicated flash manager is provided as part of STM32WBA BLE lib.
Implement a dedicated driver using FM Apis to handle RF activity.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Boot into the deep power down state when `SPI_NOR_IDLE_IN_DPD` is not
enabled. DPD is the correct hardware state for the `SUSPENDED` software
state. Without this change, it takes a cycle of
`SUSPENDED->ACTIVE->SUSPENDED` to get to the low power state.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
STM32U5X has 128k/256k/512k/1M/2M dual bank Flash.
The address of the 2 bank are continuous, so it's no need a "Dummy page"
in "stm32_flash_layout", which cause wrong slot1 section (for secondary
image), and the BANK2_OFFSET is not right either, which cause
"flash_stm32_valid_range" return a failure.
To fix the issue, just set CONFIG_FLASH_SIZE to STM32_SERIES_MAX_FLASH
Tested on NUCLEO-U545RE with mcuboot.
Signed-off-by: Weifeng Li <weifeng.li@aofrio.com>
So far the driver first changed the configuration of the flash chip
and after that checked the signature of that chip. This could lead
to improper change of the chip configuration if the actually found
one was different than that specified in devicetree.
This commit reverses the order of these two initialization steps and
also restructures a bit the initialization code.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
After integration of nrfx 3.2.0, it is no longer needed to deinitialize
the nrfx_qspi driver to avoid increased power consumption when the QSPI
peripheral is idle. Now it is enough to call `nrfx_qspi_dectivate()`
when a given operation is done. The driver will automatically activate
the QSPI peripheral again when a next operation is requested.
This commit applies the following changes:
- `qspi_device_init` and `qspi_device_uninit` functions are replaced
by `qspi_acquire` and `qspi_release`, respectively; those handle
exclusive access to the QSPI peripheral and deactivation of it or
runtime device power management
- locking is removed from `qspi_send_cmd` as it is the resposibility
of the caller of that function
- `trans_lock` and `trans_unlock` functions are removed together with
the related semaphore as they are no longer needed
- checking of input parameters is moved from `qspi_erase` to its
caller, `qspi_nor_erase`
- `qspi_nor_pm_action` is refactored to properly handle locking of
the QSPI peripheral; checking of the `xip_enabled` flag is removed
from that function as now the call to `pm_device_is_busy()` covers
that (when XIP is enabled, the device is kept indicated as busy)
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Consistently use `res` for results of calls to nrfx functions
and `rc` for Zephyr return codes, to avoid mixing up those two
and for example calling `qspi_get_zephyr_ret_code()` for a value
that is already a Zephyr return code. Correct also such call in
`qspi_nor_write()`.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
After entering the Deep Power-down mode, some flash chips ignore all
commands except from the one that releases the chip from the DP mode
and it is not possible to successfully read their Status Register then.
Since the QSPI peripheral tries to read this register when it is being
activated, it consequently fails to send the actual command that would
release the flash chip from the DP mode if that is to be done right
after QSPI initialization.
Prevent this problem by performing the QSPI activation with all pins
disconnected. This causes that the Status Register value is read as
all zeros and allows the activation to always finish successfully,
and the RDPD command to be properly sent.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Do not enable subsystem/driver shell modules by default and stop abusing
CONFIG_SHELL_MINIMAL, which is internal to the shell subsystem, to decide
when to enable a driver shell.
The list of shell modules has grown considerably through the
years. Enabling CONFIG_SHELL for doing e.g. an interactive debug session
leads to a large number of shell modules also being enabled unless
explicitly disabled, which again leads to non-negligible increases in
RAM/ROM usage.
This commit attempts to establish a policy of subsystem/driver shell
modules being disabled by default, requiring the user/application to
explicitly enable only those needed.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This CL is to minimize `CONFIG_SOC_SERIES_XXXX` definitions when we
introduce a new chip series. Most of them are relevant to register
layouts in different npcx soc series. It moves soc-specific register
definitions from `reg_def.h` to its own soc.h file.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Care must be taken to avoid any flash access while programming the flash
attached to the FlexSPI either via executing XIP code or reading RO data.
Remove locations where a constant device pointer might be dereferenced
within the mcux_flexspi_nor driver, to help avoid RWW hazards.
Fixes#64702
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The way that the QSPI peripheral is activated has been changed in
nrfx 3.2.0. Now the peripheral is not activated during the driver
initialization. Instead, the driver activates the peripheral when
the first operation is requested or when `nrfx_qspi_activate()` is
called. In case of XIP, the latter needs to be used, as there may
be no standard operation request.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Fix the SFDP command to be sent by the qspi driver
to get the SFDP table from the NOR quad flash.
Note that CONFIG_FLASH_STM32_QSPI=y and CONFIG_SPI_NOR=n
HAL_DMA_Abort declared as weak to fix compilation error with stm32f7x
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Move the syscall_handler.h header, used internally only to a dedicated
internal folder that should not be used outside of Zephyr.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In the CONFIG_SPI_NOR_SFDP_MINIMAL configuration this value is hard
coded to 256 bytes. Make it configurable via devicetree.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
changes enable flash driver to provide api interface to send reset memory
spi command to the spi flash. The reset memory command would bring the
spi flash to its default power-on state and loose all the volatile register
settings.
Flash reset is needed when more than one controller access the flash chip
in a shared mode.
Signed-off-by: Deepti Deshatty <deepti.deshatty@intel.corp-partner.google.com>
Because shadow variable warning is turned on, a warning was thrown and
could fail some twister tests that don't use the -W option. This commit
gets rid of the warning.
Signed-off-by: David Corbeil <david.corbeil@dynon.com>
Replace Nuvoton NPCX series definitions with new Kconfig definitions in
the npcx drivers. The benefit of this approach is that we won't touch
the npcx driver sources again during introducing a new npcx series next
time.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Update interface of memc flexspi driver to better handle multiple
devices. Previously, using multiple devices on one FlexSPI bus would
require the user to configure each device to install its command table
(referred to as a LUT table by the driver) at an offset, so that it did
not overlap with other devices on the bus.
This commit changes the interface of the memc flexspi driver to instead
configure the LUT and flash device in one call. This allows the memc
driver to record the port each LUT sequence is used with, so that
future FlexSPI transfer requests can have their LUT offsets adjusted
based on the target port (which will correspond to a target device)
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
