This reverts commit 4c32e21fc7 with some
manual conflict resolution.
It's not clear that the supported devices are being properly computed,
so let's revert this for v2.7.0 until we've had more time to think
it through.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Since the tests expects devices to change states, PM_STATE_RUNTIME_IDLE
can't be used. The first state that cares about devices is
PM_STATE_SUSPEND_TO_IDLE.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use separate DUT and TST builds in EDTT HCI tests so that
the tester can send Data Length Requests with txOctets and
maxTxTime as required by the test specification. TST build
has HCI parameter checks disabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
PR includes test that combines and checks OOB public key
provisioning with all possible OOB authentications
and OOB public key provisioning without auithentication.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
There were some leftovers in logging after attempt to use
logging as tracing backend. Removing all references since it
lead to test compilation failures.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Assert messages are printed if the assertion fails, so they should
state what went wrong instead of the expected behaviour.
Signed-off-by: Martin Jäger <martin@libre.solar>
Added log_internal.h for internal APIs. Move functions out of
log_core.h. Log_core.h shall have only macros and functions related
to logging message creation. Log_core.h is included by log.h thus
number of dependencies in that headers must be limited to minimum
to allow including without risk of circular dependencies.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add testing for the PIN_ONLY API variant (which has a separate run
queue per CPU). Predicate on SMP systems only, to keep needless
duplicate testing to a minimum.
Note that one of the cases in this test exercises an "all cpus" option
for the cpu mask, which is illegal when CONFIG_SCHED_CPU_MASK_PIN_ONLY
is set. Skip.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When creating a socket, all of the registered socket implementation are
processed in a sequence, allowing to find appropriate socket
implementation for specified family/type/protocol. So far however,
the order of processing was not clearly defined, leaving ambiguity if
multiple implmentations supported the same set of parameters.
Fix this, by registering socket priority along with implementation. This
makes the processing order of particular socket implementations
explicit, giving more flexibility to the user, for example when it's
neeed to prioritze one implementation over another if they support the
same set of parameters.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fix the trigger_fault_access. The fix is similar to cortex m.
Fix the trigger_fault_divide_zero. The fix is similar to qemu, i.e.
skip this testcase, because FVP would not trigger the exception for
dividing zero either.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
After doing some tests on Armv8R aarch64 board, the used stack memory
exceeds the stack size for about 64 bytes. Extending ZTEST_STACKSIZE
to 5120 can fix it.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
As per #38352, we would like to start building out PTP (IEEE 1588)
support for superset of gPTP functionality in Zephyr. This is the first
step to abstract away some key interfaces from NET_GPTP umbrella to
NET_L2_PTP.
Signed-off-by: Alex Sergeev <asergeev@carbonrobotics.com>
BubbleSim tests that check provisioning with all possible (from spec)
OOB authentications
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Add a simple ITS driver test allocating 8192 LPIs over 256 DeviceIDS
and 32 EventIDs per DeviceID to exercise the ITS for the MSI/MSI-X
usecase.
The test is set as `build_only: true` and whitelisted to the
fvp_base_revc_2xaemv8a board until the shipped Zephyr QEMU
has the ITS support.
Since `fvp_base_revc_2xaemv8a` needs FIP & BL1 files, test is marked
as `skip: true`.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
The ITS needs a number of table, so HEAP must be reserved for runtime
allocation (1MiB is a round and convenient value):
- Redistributor:
* 64K table for all redistributors
* 64k for each redistributors
- ITS:
* 4K collection table aligned on 4K
* 4K x 128 device table aligned on 4K
This makes 11x64K to permit all allocations to success.
Note, will need 64K HEAP_MEM per CPUs added.
This doesn't necessarily include the Interrupt Translation Table,
which are 256bytes aligned tables, for reference a 32 ITEs table
needs 256bytes.
With 14x64K HEAP, up to 116 ITT tables of 32 ITEs can be allocated.
A specific HEAP_MEM_POOL_SIZE as been added to arm64_gicv3_its test
for the fvp_base_revc_2xaemv8a board to satisfy all memory allocation
constraints for 256 ITT tables with 32 ITEs allocations.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Move memory.h out of the way in a more "private" space
(include/linker/devicetree_reserved.h) to prevent polluting the
devicetree space.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
For some reason, provided pin configuration for nucleo_f103rb
is not able to detect gpio callback issues.
Move to other pin combination which detect pin callback issues.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Fixes: #38403
Adding NET_DRIVERS menuconfig so that network drivers are grouped
together in its own menu entry under drivers, similar to most other
drivers.
This further has the advantages that `CONFIG_NET_DRIVERS` can be used
for testing to determine if network drivers has been selected.
This changed revealed a dependency loop where both `select` (for SLIP)
and `depends` (for PPP) which both depends on NET_DRIVERS` where in use
in the dependency tree for Qemu networking, especially NET_SLIP_TAP.
This is handled by defaulting `NET_DRIVERS` to `y` when building for a
Qemu target.
`SLIP` had a dependency to `!QEMU_TARGET || NET_QEMU_SLIP`. This is
changed so that SLIP prompt depends on `!QEMU_TARGET` which provides
full user control in hardware but makes the symbol promptless on Qemu
targets.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fix the broken logic in the kernel/thread_stack test
The modified test should do direct read & write from estimated stack
pointer to highest address in the stack buffer.
Previously this test was start from lowest address in the stack
which would trigger exception of hardware stack checking scheme
violation on ARC boards and other targets with hardware stack
overflow detection.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
binary_f16 and binary_f16.fpu test cases fail when target
SRAM size is below 140k.
Update test case requirements to set min_ram to 144.
Additionally, remove the platform_exclude hich is now useless
(frdm_kw41z ram is 128k).
Fixes#38826
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Ensure that length variables (len0, len1, len2) are positive
before they are used for array indexing.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
ptp_clock_test was failing when trying to access the ptp clock from user
mode. This was due to an arbitrary initialization priority between the
virtual PTP clock devices created by the ptp clocking test and the
physical PTP clock on the frdm_k64f board. Since the ptp test
initializes the virtual clock with the same device name as the physical
clock, if the physical clock was initialized first this test would
incorrectly reference the physical device during testing, instead of the
virtual one.
This fix simply defines the virtual ptp clock with a custom name, so
that the test will always locate the correct ptp clock.
Fixes#38731
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
1. Add support for multiple syscon entries (as a side effect, this also
fixed syscon.c implementations which weren't being linked to their
syscon.h counterparts).
2. Add support for different width registers in syscon.
3. Add tests for syscon
Signed-off-by: Yuval Peress <peress@chromium.org>
bsim test build system hides compile warnings.
This commit adds extra cc flags to prevent this.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Replace the old whitelist-related terms with the new filter accept list
one from the Bluetooth spec v5.3.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove the HL7800 DTR device tree binding because the
DTR IO is not needed for operation of the HL7800
modem.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
This commit corrects the DMA channels for the asynchronous
UART API testing support on the SAM R21 Xplained Pro board.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
In the file variable val is not initialized,
causing the variable stack_ptr, pos, points to uninitialized data.
Initialize the variable val according to the code and commits.
Fixes#37916
Signed-off-by: Naiyuan Tian <naiyuan.tian@intel.com>
there is a memory hole from address 0x10000000-0x12150fff
in the ram on up_squared, we don't have access to read/write
this range, so limit the memory range below 0x10000000.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
For ECFC L2CAP test we user overlay with disabled EATT and
bt_eatt_disconnect_one() is available only with EATT enabled.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
The Bluetooth Core Specification, version 5.3, has introduced multiple
changes to several widely-used terms in order to make them inclusive.
Update the public API to reflect this, excluding hci.h, which will be
done in a subsequent commit.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This patch is testing the test_sleep_abs with a longer
real time slot value. The reason is that for platforms
like stm32wb55rg with PM, the real time slot must be adjusted
because of the LPTIM ticker.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The test assumed initial equality between CLOCK_MONOTONIC and
CLOCK_REALTIME and also assumed coarse granularity for each clock.
Neither of those assumptions are solid.
Furthermore, the test failed on multiple vendor boards which caused
some concern.
Remove the poorly conditioned tests and remove some comments
/ printks.
Fixes#35703
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
add a bitarray into struct osThreadDef_t to indicate whether the
thread is used or not, then we can get the first available thread
by searching this array when creating a new thread, and update this
array to add a free thread when terminating a thread.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
To test fallback to remaining bearers PTS might request IUT to
disconnect one of the connected EATT channels, while the others remain
intact. Test function must be added, because we cannot create L2CAP
server on EATT PSM and manage this server as normal and have EATT
enabled at same time.
This is affecting GATT/SR/GAW/BV-14-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
