Add a k_timeout_t type, and use it everywhere that kernel API
functions were accepting a millisecond timeout argument. Instead of
forcing milliseconds everywhere (which are often not integrally
representable as system ticks), do the conversion to ticks at the
point where the timeout is created. This avoids an extra unit
conversion in some application code, and allows us to express the
timeout in units other than milliseconds to achieve greater precision.
The existing K_MSEC() et. al. macros now return initializers for a
k_timeout_t.
The K_NO_WAIT and K_FOREVER constants have now become k_timeout_t
values, which means they cannot be operated on as integers.
Applications which have their own APIs that need to inspect these
vs. user-provided timeouts can now use a K_TIMEOUT_EQ() predicate to
test for equality.
Timer drivers, which receive an integer tick count in ther
z_clock_set_timeout() functions, now use the integer-valued
K_TICKS_FOREVER constant instead of K_FOREVER.
For the initial release, to preserve source compatibility, a
CONFIG_LEGACY_TIMEOUT_API kconfig is provided. When true, the
k_timeout_t will remain a compatible 32 bit value that will work with
any legacy Zephyr application.
Some subsystems present timeout (or timeout-like) values to their own
users as APIs that would re-use the kernel's own constants and
conventions. These will require some minor design work to adapt to
the new scheme (in most cases just using k_timeout_t directly in their
own API), and they have not been changed in this patch, instead
selecting CONFIG_LEGACY_TIMEOUT_API via kconfig. These subsystems
include: CAN Bus, the Microbit display driver, I2S, LoRa modem
drivers, the UART Async API, Video hardware drivers, the console
subsystem, and the network buffer abstraction.
k_sleep() now takes a k_timeout_t argument, with a k_msleep() variant
provided that works identically to the original API.
Most of the changes here are just type/configuration management and
documentation, but there are logic changes in mempool, where a loop
that used a timeout numerically has been reworked using a new
z_timeout_end_calc() predicate. Also in queue.c, a (when POLL was
enabled) a similar loop was needlessly used to try to retry the
k_poll() call after a spurious failure. But k_poll() does not fail
spuriously, so the loop was removed.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Kernel timeouts have always been a 32 bit integer despite the
existence of generation macros, and existing code has been
inconsistent about using them. Upcoming commits are going to make the
timeout arguments opaque, so fix things up to be rigorously correct.
Changes include:
+ Adding a K_TIMEOUT_EQ() macro for code that needs to compare timeout
values for equality (e.g. with K_FOREVER or K_NO_WAIT).
+ Adding a k_msleep() synonym for k_sleep() which can continue to take
integral arguments as k_sleep() moves away to timeout arguments.
+ Pervasively using the K_MSEC(), K_SECONDS(), et. al. macros to
generate timeout arguments.
+ Removing the usage of K_NO_WAIT as the final argument to
K_THREAD_DEFINE(). This is just a count of milliseconds and we need
to use a zero.
This patch include no logic changes and should not affect generated
code at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We rename the nRF91 Dev Kit board target for the NRF52840
controller (nrf52840_pca10090) to nrf9160dk_nrf52840. We
update all associated references in the supportive
documentation and all nRF9160-related cofigurations and
overlay files in the samples and tests in the tree. We
also remove an un-referenced board image file that had
erroneously been part of the documentation of this platform.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We rename the nRF91 Dev Kit board target (nrf9160_pca10090)
to nrf9160dk_nrf9160. We update all associated references
in the supportive documentation and all nRF9160-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes the Kconfig MAC address configurations for the
`sam_e70_xplained` board, as these have been migrated to use the device
tree configurations.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The MAX_PAYLOAD_SIZE must reflect the size of COAP_BLOCK_x. This is
necessary becase BLOCK size represents max payload size. The current
value create inconsistencies for coap lib. The same way,
MAX_DOWNLOAD_DATA must allocate sufficient space for MAX_PAYLOAD_SIZE
plus all space for coap header etc.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This is a follow-up to commit 4253eae005.
The board known earlier as nrf52840_pca10056 is now named
nrf52840dk_nrf52840.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use the scan types defined in bluetooth.h instead of the hci defined
ones. Although they have the same value it is best to avoid using the
hci.h header in applications.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Deprecate BT_LE_ADV defines in hci.h that are expected to be used by the
application in the scan received callback to identify the advertising
PDU type. These defines are mixing HCI input parameters and advertising
PDU types. Internally it is acceptable to mix these, but at the API we
should to mix in them.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename filter_dup parameters used for scanning filter options to the
more generic name options, and make scan filter options follow same
naming patters as advertising and initiator scan options.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Deprecate bt_create_conn_le and rename it to in order to add return
code, new arguments and to follow the established naming convention.
Add API for the application to control the scan parameters of the
initiator role. This allows the application more scheduling control
of the initiator in multi-role scenarios. Also provides options to
configure the initiator for LE Coded PHY for long range support.
We deprecate the old way of creating connection to make the name more
consistent with the rest of the API.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We can build the openamp library configured with VirtIO master
support, VirtIO slave support, or both. By default both master
and slave code is enabled. We can reduce code footprint by only
build master or slave as needed.
Expose Kconfig options for Master & Slave and set them accordingly in
the sample.
Here's the code reduction we see:
For the total image we see as 1260 byte reduction:
Memory region Used Size Region Size %age Used
FLASH [Master & Slave]: 30308 B 256 KB 11.56%
FLASH [Master only] : 29048 B 256 KB 11.08%
On the remote side we see a 828 byte reduction:
Memory region Used Size Region Size %age Used
FLASH [Master & Slave]: 11564 B 64 KB 17.65%
FLASH [Slave only] : 10736 B 64 KB 16.38%
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Just to get something to test for PM, via frdm_k64f board. So only this
board will get PM enabled.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
AN521 is a dual core FPGA on MPS2+ with both cores are CM33. Add openAMP
to support on it.
Core 0 is primary core, it runs as master, core 1 is remote, it runs
as slave.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Add configuable shared memory address for openAMP samples. There is a
plan to add more platforms supported for openAMP in zephyr.
Each platform can specify the shared memory address and device by
device tree and add it's support in openAMP samples.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
gpio_pin_get() returns a negative value in case of error and
callbacks_configure was assigning this value to an unsigned variable.
Fixes: #22643
Coverity CID :208206
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
In addition to the existing plain TCP MQTT test, add the same test
with TLS applied. Robert Lubos provided the updated test_cert.h, which
contains the same certificate as in the echo samples.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
OpenThread NCP sample application.
Tested on FRDM-K64 with RF2XX connected via USB to a Linux machine
running wpantund.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
This doesn't sacrifice any readability when compiled for boards that
don't support this alias.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is joint work with Kumar Gala (see signed-off-by).
Document the changes to the generated node macros in macros.bnf,
moving the old file to legacy-macros.bnf and putting it in its own
section.
The actual generated macros are now a low-level detail, so rewrite the
foregoing sections as examples in terms of the new <devicetree.h> APIs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We rename the nRF51 Dev Kit board target (nrf51_pca10028)
to nrf51dk_nrf51422. We update all associated references
in the supportive documentation and all nRF51-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The documentation motivates this function by saying it is more
efficient than the core 64-bit version. This was untrue when
originally added, and is untrue now. Mark the function deprecated and
replace its sole in-tree use with the trivial equivalent.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Allocates segmented message buffers as slabs in a common pool for RX and
TX. This reduces memory requirements for both TX and RX, as TX messages
can be stored without the network and advertising buffer overhead, and
RX can use only the slabs it needs, instead of allocating a full size
segmented message. This approach also removes the need for decrypting
the segments for each retransmission, reducing overall processing load.
Slab based segmentation for tx also introduces queuing of segmented
messages, which allows the application layer to send multiple messages
to the same destination without violating Bluetooth Mesh specification
v1.0.1, section 3.6.4.1. This mechanism is provided through a flag that
blocks segmented messages to a destination which a message is already
being sent to until the previous message finishes.
This changes the SDU size configuration to a symmetrical
RX_SEG_MAX/TX_SEG_MAX pair of configurations, plus a new segment pool
side configuration. It also removes the binding between the TX_SEG_MAX
config and the advertising buffers, reducing the minimum advertising
buffer count from 6 to 3.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Cloud to device communication supported with simple
subscribe topic details. Details are added for how to send
messages from cloud.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Name all subsystem reference consistently with an '_api' postfix and
clean up naming and folder structure in some cases.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Various kconfig symbols where defined specifically for board
nucleo_l432kc. Though, most are generic to the sample so should moved
directly to sample prj.conf
Some others parts of boards default configuration so could be removed
as well.
Last remove CONFIG_OPENOCD_SUPPORT as sample has no dependency with
this symbol.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
No use starting the application if the network interface is down.
So start to listen connection management events and start the
TCP and UDP handlers only after network is up and ready.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Modify the mqtt_publisher sample app to return an exit code after
its tests have been run. Add Kconfig options to set the number of
test iterations per TCP connection as well as the number of TCP
connections to make to the server while keeping the default values
intact. Further add a config overlay file to lower the number of
TCP connections and test iterations used.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Without it, the sample crashes for qemu_x86 with:
[00:00:03.080,000] <err> os: Page fault at address 0x7275632f
(error code 0x10)
[00:00:03.080,000] <err> os: Linear address not present in page tables
[00:00:03.080,000] <err> os: PDPTE: Non-present
...
Increase by reasonable, but small amount, to keep watching stack usage
growth trends in Zephyr.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Sample code that showcase PECI API get device CPU information
then monitors temperature.
Verified in Modular MEC1501 connected to computer (PECI host).
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
