This patch introduces the Connect API which initiates session
connection first. If session is already there with the peer
then it has to reuse it and initiate DLC (which will be done
in the subsequent patch) since there can be only one session
per device.
< ACL Data TX: Handle 256 flags 0x00 dlen 8
Channel: 64 len 4 [PSM 3 mode 0] {chan 0}
RFCOMM: Set Async Balance Mode (SABM) (0x2f)
Address: 0x03 cr 1 dlci 0x00
Control: 0x3f poll/final 1
Length: 0
FCS: 0x1c
> ACL Data RX: Handle 256 flags 0x02 dlen 8
Channel: 64 len 4 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Ack (UA) (0x63)
Address: 0x03 cr 1 dlci 0x00
Control: 0x73 poll/final 1
Length: 0
FCS: 0xd7
Change-Id: I9828e0f3b3ea43bb17df95f0536e15df86f1b4be
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This replaces initiator flag of session and dlc to enum which has
two values INITIATOR and ACCEPTOR.
Also this defines macros for CRs in header. Basically there are
three types fo CRs. Frame header CR has different meaning for
UIH and non UIH packets. Also this renames the existing msg hdr
CR to make it consistent.
These changes are basically done to make it more readable
Change-Id: Ic15e93465b0afbd19d8805f27d7a43f34ef38689
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
The header was always supposed to be Apache 2 and not 3-Clause BSD.
Change-Id: I82f319edfc7a76323b2b409fadc90e270d7f1cad
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This change adds SPP as a sample SDP service during RFCOMM
server registration. The SPP channel is now used as the
fixed channel for RFCOMM register command.
Change-Id: I3b5ad3995725adca55db1497d4a35099f6311f3b
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
The reference counting has been an internal trick to handle the TX
fiber, but it's not really needed since we can do the same thing with
the help of the state value.
Change-Id: I9cdaed9afb0b0c07e23d599637328cb863c123b3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
dlc will be destroyed when ref count reaches 0.
This also moves calling user disconnected callback to destroy
since disocnneted callback will be called whenever dlc is
destroyed regardless of dlc previously been in connected state
or not.
Change-Id: I4a13f8118704c59a88923b74e538063c0db11d77
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Limited number of RFCOMM channels(1-31). Pre-allocated
for profile use and to avoid conflicts.
Change-Id: Ibd081435cf927aa7386161710e48b7371d20af24
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Data sent by user will be queued in a FIFO. A TX fiber will be
started for each DLC which process this FIFO and write to L2CAP.
Fiber will sleep in two scenarios - no buffer in FIFO, no TX
credit. Credit is handled using semaphore. So if credit is 0
then fiber will wait on semaphore and will be scheduled when
it receives credit.
Change-Id: Id6e796eed594b28d6fb6e4259d3ed52634db9335
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Profiles can use this helper to create buffer which reserves the
headroom for rfcomm, l2cap and acl headers
Change-Id: I22f97b54423d66fe0c133a8e9903b652fb6a6854
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Sends the data to l2cap after adding rfcomm header. Profile should
reserve the head room for rfcomm, l2cap and hci headers. Data length
should not be more than dlc mtu.
Flow control is not included in this patch
< ACL Data TX: Handle 256 flags 0x00 dlen 38
Channel: 64 len 34 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Info with Header Check (UIH) (0xef)
Address: 0x09 cr 0 dlci 0x02
Control: 0xef poll/final 0
Length: 30
FCS: 0x40
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff 40
Change-Id: Ib97dbf85e236a5f75fda6037bb75bc6be00b9dc7
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
PN (Parameter negotiation) is used to negotiate parameters like mtu.
Initial credit for flow control is also sent in PN. If the dlci to which
PN requested is not found in the dlc list then it will be treated as
incoming dlc request and accept callback will be called to profile.
Dlc mtu has to be set by profile (before it returns dlc) which will be
negotiated with remote. But the final mtu will be min of mtu provided
by profile, mtu sent by remote, and session mtu
> ACL Data RX: Handle 256 flags 0x02 dlen 18 [hci0] 210.108444
Channel: 64 len 14 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Info with Header Check (UIH) (0xef)
Address: 0x03 cr 1 dlci 0x00
Control: 0xef poll/final 0
Length: 10
FCS: 0x70
MCC Message type: DLC Parameter Negotiation CMD (0x20)
Length: 8
dlci 2 frame_type 0 credit_flow 15 pri 7
ack_timer 0 frame_size 122 max_retrans 0 credits 7
< ACL Data TX: Handle 256 flags 0x00 dlen 18 [hci0] 210.111452
Channel: 64 len 14 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Info with Header Check (UIH) (0xef)
Address: 0x01 cr 0 dlci 0x00
Control: 0xef poll/final 0
Length: 10
FCS: 0xaa
MCC Message type: DLC Parameter Negotiation RSP (0x20)
Length: 8
dlci 2 frame_type 0 credit_flow 14 pri 0
ack_timer 0 frame_size 30 max_retrans 0 credits 7
Change-Id: Ifd466db6b3b868d04e38db02ebad6e47ab2da030
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Profiles can use this API to register the RFCOMM server channel.
DLC structure which represents individual connnection on a particular
server channel has to be defined in the profile and provide it in
accept callback.
Change-Id: I14e607ca65a29f29389deb2ac5d0658f5cd92883
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
