As the debugging print calls are async, all the strings that might
be overwritten must use log_strdup() which will create a copy
of the printable string.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently logging subsystem supports quite small number of function
parameters. So split some long functions into smaller pieces.
Hopefully this is just a temporary patch and we can support more
parameters to logging macros.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of one global log level option and one on/off boolean
config option / module, this commit creates one log level option
for each module. This simplifies the logging as it is now possible
to enable different level of debugging output for each network
module individually.
The commit also converts the code to use the new logger
instead of the old sys_log.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Completely remove the last_sync_receipt_timeout time. It is not part of
the standard (see 802.1AS-2011, 10.2.11 for the complete list of
variables for this state machine). Additionally this extra variable was
never really initialized so the calculated duration made no sense.
Just start the timer based on the regular sync receipt timeout time
interval from the port data set.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Under GNU C, sizeof(void) = 1. This commit merely makes it explicit u8.
Pointer arithmetics over void types is:
* A GNU C extension
* Not supported by Clang
* Illegal across all ISO C standards
See also: https://gcc.gnu.org/onlinedocs/gcc/Pointer-Arith.html
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
pkt properties should be set prior to routing.
If packet routing is turned on and the packet is
forwarded to an interface, the pkt properties like
ipv6_ext_len or ip_hdr_len will not be initialized.
If a UDP packet is forwarded to an 6lo interface,
it leads to incorrect calculation of UDP header
during UDP header compression (net_udp_get_hdr).
Fixes#10204
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
If the neighbour does not exists, then the route to it cannot
be deleted so we can return error to caller in that case.
Coverity-CID: 188173
Fixes#10090
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In net_route_add(), do not try to print route information if
route to neighbor is not found.
Coverity-CID: 188172
Fixes#10091
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the destination address to select the proper network interface
when binding. The default network interface cannot be used here
as then the packet might be sent to wrong network interface.
Fixes#9935
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
- Up to net_context to give the source port.
- net_udp_append is unused anywhere: let's remove it.
- left over macros on _raw versions removed as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
*_ll_src/*_ll_dst/*_ll_swap/*_ll_if were not self explanatory, ll
meaning "link layer" it's ambiguous what the names meant.
Changing to:
*_lladdr_src/*_lladdr_dst/*_lladdr_swap/*_lladdr_if to fix this.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The new "net ipv6" command which will print general IPv6 configuration
and information about autoconfigured IPv6 addresses.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_if_ipv6_prefix_get() function will return the proper prefix
for a given IPv6 address and network interface. This is used when
checking which source address should be returned to the caller.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor IPv6 address lifetime timer setting in net_if_addr to support
longer lifetime than 24 days.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ciaddr can be null in requesting state so do not try to print
it in that case.
Fixes#9575
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
NET_CONN_CB() functional macro hides the parameters a function takes
and its return type. In #8723, it's proposed to remove that macro
altogether. Until that proposal is reviewed, at least provide real
protype in code comments to help people who read/analyze the code.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If a malformed packet with multiple HBHO is received by the Zephyr IP
stack it replies with ICMPv6 type 4 code 1: "Parameter problem
unrecognized Next Header type encountered". This ICMPv6 message has
wrong IPv6 payload length and ICMPv6 checksum.
RFC 8200 in chapter 4.1 states:
Each extension header should occur at most once, except for the
Destination Options header, which should occur at most twice (once
before a Routing header and once before the upper-layer header).
There are two possible solutions to the problem at hand:
1) Respond with ICMPv6 Parameter problem, in this case IPv6 length and
ICMPv6 checksum need to be fixed
2) Drop the malformed packet
This patch implements the easy solution - 2. Basically it changes the
code to drop the malformed packet instead of sending ICMPv6 type 4
code 1.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
These were at most set, but never used. They appear to be artifacts
of importing code from the FNET stack.
Addresses: #9570
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In TCP protocol, any packet is subject to retransmission if not
ACKed in expected time. Thus, any packet, including FIN (and SYN
for that matter) should be added to the retransmission queue.
In our case, despite its name, queue_fin() function didn't add
FIN packet to rexmit queue, so do that. Then, in
net_tcp_ack_received() which handles ACKs, make sure that we can
handle FIN packets: calculate its sequence number properly, don't
make adhoc adjustments to retransmission logic (it's handled
centrally in restart_timer() already), etc.
Fixes: #8188
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If we run out of buffers and cannot create the TCP segment,
then handle it properly and do not access NULL pointer.
Coverity-CID: 187822
Fixes#9639
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is timeout when adding UDP data, then check this
condition and bail out by returning NULL as the packet is now
malformed.
Coverity-CID: 187825
Fixes#9636
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
1. Where we calculate max size, name variable (preprocessor define)
correspondingly.
2. Calling TCP/UDP an "app protocol" is original, use "next protocol"
terminology of IPv6.
3. As headers go as IP, then "next", order calculations that way too.
4. Add more comments.
Addresses: #8723
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
CONFIG_NET_OFFLOAD was defined in Kconfig of net/ip/l2/, but actually
used by the code in net/ip/.
Fixes: #8646
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Spurious TCP retries were observed using Wireshark while continuously
sending TCP packets at an interval faster than the initial RTO.
If the send list is empty and CONFIG_NET_TCP_TIME_WAIT_DELAY is used,
the retry timer will not be correctly stopped when receiving a valid
ACK. As a consequence, the timer might be running when a new packet is
queued, but the logics in net_tcp_queue_data() will not restart the
timer as it is already running. This will make the retry timer to expire
prematurely, potentially while sending packets.
The nested condition is merged into a single condition, allowing the
final else clause to be reached when a valid ACK is received.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
The autoconfigured IPv6 addresses that are related to removed
prefix, need also removed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the IPv6 address expires, then it is marked as deprecated.
If a renewal is received in router advertisement, then the address
can be re-used again and is marked as preferred.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No functionality changes. Just moved IPv6 fragment and related functions
to ipv6_fragment.c for better readability
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
No functionality changes. Just moved IPv6 MLD and related functions
to ipv6_mld.c for better readability.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
No functionality changes. Just moved IPv6 neighbor and related functions
to ipv6_nbr.c for better readability.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Each IPv6 neighbor entry had a k_delayed_work to be used as a timer to
send ND reachable message and waiting for the reply in order to get to
the neighbor details.
But k_delayed_work is not a small object (40 bytes). Thus reworking the
IPv6 ND reachable request timer by having one central k_delayed_work
and a timestamp in every IPv6 neighbor data entry properly handled at
every timeout.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Each IPv6 neighbor entry had a k_delayed_work to be used as a timer to
send NS message and waiting for the NS reply in order to get to the
neighbor details.
But k_delayed_work is not a small object (40 bytes). Thus reworking the
IPv6 send NS request timer by having one central k_delayed_work and
a timestamp in every IPv6 neighbor data entry properly handled at every
timeout.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Instead of having one delayed_work struct / IP address, use
only one delayed_work struct for lifetime timer. This saves
over 20 bytes / allocated address struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor usage of net_sprint_ip*() where multiple
invocations are needed per single log call.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
The intention is to clean up the usage of net_sprint_ipv*_addr()
functions where 2 or 3 invocations are needed.
Thus, the default number of buffers is 3.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
irq_lock returns an unsigned int, though, several places was using
signed int. This commit fix this behaviour.
In order to avoid this error happens again, a coccinelle script was
added and can be used to check violations.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Thise uses the new net_pkt_append_memset() function to generate the
required zero filling instead of calling net_pkt_append_u8() in loops.
Fixes#9287
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
Some locations like DHCPv4 client create a prefilled packet by appending
new fragments in a loop with one byte each via net_pkt_append_u8() which
is wasteful and noisy. This patch adds the new functions
net_pkt_append_memset() which creates fragments as needed in the desired
size and initialises it to the specified value.
This change also adds a unittest for the new function.
Prerequisite for #9287
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
