Add sample which clearly and thorougly shows how to use RTIO with
I2C controllers, both synchronously and async, comparing it with
the "standard" I2C API, in an controlled environment. Both the I2C
controller and I2C target are managed by the sample, using loopback
to monitor and control the I2C transfers.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Convert vendor specific **_WIFI_BUILD_ONLY_MODE symbol as global
in order to provide common build flag to enable CI with no blobs.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Add a new option to control usage of DT nodelabel board_power. This
option also allows to select GPIO when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add options to control the behavior of sw0/sw1. These options also allow
to select GPIO when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new option to control the behavior of sw0. This option also allows
to select GPIO when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new option to control led0 behavior. If enabled, led0 will be used
for blinking. This option also allows to select GPIO when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new Kconfig option to control the behavior of sw0. If enabled, sw0
button will be used for provisioning. This option also allows to select
GPIO.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new Kconfig option to control the behavior of led0. This option
also allows to select GPIO only when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fixes an issue introduced with commit
c6ad4a7927 which wrong restarts
advertising after a device connects when it should only restart
advertising if a device fails to connect
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
It reports Advanced Pedometer and Event Detection features,
such as Pedometer, Tilt detection, Wake on Motion and
Significant Motion Detector. Device tree options.
Signed-off-by: Aurelie Fontaine <aurelie.fontaine@tdk.com>
Update central multilink sample to get version info to
verify actual data transmissions will succeed, and there is
no disconnect with reason connection fail to be established.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update central multilink sample to use continuous scanning
to speed up connection setup.
Update peripheral identity sample to be configurable for
bsim testing as multiple devices with configurable count
of supported connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
With changes introduced in commit 6a3602a306
("net: buf: Clear `user_data` on allocation")
our memset() calls are redundant.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The Bluetooth HCI USB transport layer implementation is provided by
"subsys/usb/device/class/bluetooth.c". The USB H4 Bluetooth function
implements a non-standard transport layer. There is no known host-side
equivalent that uses this protocol.
Note that the H4 protocol functionality is also provided by the
"subsys/usb/device/class/bluetooth.c".
Since that there are no real USB H4 Bluetooth users, remove the
implementation and sample without deprecation.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add Devicetree overlay for sample drivers/led/pwm and fix the one in
basic/blinky_pwm for nucleo_l4r5zi board to set appropriate to enable
pwdleds and set appropriate timer prescaler.
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
The Adafruit QT Py ESP32-S3 needs to have GPIO hogs enabled in order to
use the onboard RBG LED with the led_strip sample code.
Signed-off-by: Ian Wakely <raveious.irw@gmail.com>
For the latest upstream, if MBEDTLS_ENABLE_HEAP is not enabled, it will
default select MBEDTLS_PSA_STATIC_KEY_SLOTS, and consume extra SRAM for
about 35KB. Therefore, default enable MBEDTLS_ENABLE_HEAP.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Remove CONFIG_HEAP_MEM_POOL_SIZE for RW612, it will use
HEAP_MEM_POOL_ADD_SIZE_ way to add all module's heap size
together, to better control heap size for different case.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
uart_irq_update() should always be called in IRQ processing callback.
From API documentation:
"This function should be called the first thing in the ISR. Calling
uart_irq_rx_ready(), uart_irq_tx_ready(), uart_irq_tx_complete()
allowed only after this."
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Do hflipping at camera level to avoid using PxP which impacts camera
framerates on RT10xx. Moreover, on RT11xx, PxP is already reserved
for 90 CCW image rotation.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Add an option to mirror the video image horizontally. This helps
to avoid doing so at the post-processing step by using additional
HW such as PxP on i.MX RT platforms.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Make APP_CPU board name auto generated and remove the related config.
Remove the boards overlay and replace with a socs overlays.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Separate wifi example user config file to wifi network configurations
and hostap configurations.
User can set EXTRA_CONF_FILE as overlay-hostap.conf file to get
external hostap support.
Without overlay-hostap.conf, we will have embedded hostap.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
