The test benchmark.kernel.footprints.pm currently generate these warnings
during the link:
[204/209] Linking C executable zephyr/zephyr_pre0.elf
.../ld.bfd: warning: orphan section `.udma_addr1' from \
`zephyr/libzephyr.a(UDMA.c.obj)' being placed in \
section `.udma_addr1'
[209/209] Linking C executable zephyr/zephyr.elf
.../ld.bfd: warning: orphan section `.udma_addr1' from \
`zephyr/libzephyr.a(UDMA.c.obj)' being placed in \
section `.udma_addr1'
Last version of hal_silabs provide a workaround for this issue.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Add LINKLAYER_PLAT_EnableBackupDomainAccess() and
LINKLAYER_PLAT_DisableBackupDomainAccess() to use Zephyr resources
that use a reference counter for access requests, for enabling
and disabling access the BackupDomain resources.
Bump hal_stm32 module to the revision integrating related stm32wba
BLE updates.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Update with the latest nordic hal which includes an updated
CRACEN driver which supports the 54LM20 and newer devices
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Main changes since v2.6:
* ext_2G4_phy_v1: Runtime performance optimizations
* ext_2G4_libPhyComv1: Add BT LE HDT support
* ext_2G4_channel_Indoorv1: Add BT LE HDT support
Note: Like before, bsim remains fully backwards compatible
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update the HW models module to:
968d55ff22579080466bf2f482596dd6e35361c6
Including the following:
968d55f 54LM20: Also build CRACEN RNG
2c6d49d CRACEN RNG: Add model of the new version of the IP
914b475 54LM20: Add first version
fb68cc6 grtc hal replacement: Remove pointless macro use
ef2f63e Fix wrong NRF_UARTE register reference
63a2e85 README: Clarify the models are not perfect, and correct links
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Some DMA and LP wrappers were missing for MAX32660 which caused build
errors on CI runs. Update hal_adi to get the necessary fixes.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
Update the Simplicity SDK HAL for Silicon Labs Series 2
devices to v2025.6.0.
The em_core source file no longer exists in the latest version
of the HAL, and is removed.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Migrate the dma_nxp_edma driver to SDK-NG. This means:
1) Adding the CMAKE logic required for compiling the module
2) Updating the HAL_NXP manifest to pull in the patches which
handle the migration on the HAL side
3) Removing CMAKE logic from old mcux-sdk so that they are no
longer included in the build
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
The function FLEXIO_SPI_MasterTransferNonBlocking has a bug when
works in CS continuous mode. In this mode, both RX and TX
interrupts are enabled, they share the same IRQ line.
In the ISR, the RX event and TX event are not handled well,
so a short delay in ISR is needed.
The function FLEXIO_SPI_MasterTransferNonBlocking issue is fixed,
the delay in ISR can be removed.
Signed-off-by: Jason Yu <zejiang.yu@nxp.com>
Updated driver based on changes done in SDK 25.06.00-pvw2.
Update hal_nxp to include BLE LL and IEEE 802.15.4 PHY NBU
combo firmware for MCXW72 boards.
Signed-off-by: Cristian Bulacu <cristian.bulacu@nxp.com>
Update to fork from lvgl's master branch with the following fix:
* fix: ifdef function to avoid unused function build warning
Which fixes this issue being triggered in Zephyr's CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Imported mem pool quota files from the SDK driver
Adding mempool quota files significantly improved
the performance of the SDK driver.While the basic
buffer pool caused issues during long running UDP
data transfers,the mempool quota demonstrated
stable and reliable performance.
Signed-off-by: Rahul Gurram <rahul.gurram@silabs.com>
Update HAL to fix wifi IRQ allocation for ESP32-S3.
HAL code depends on ESP_WIFI_TASK_CORE_ID symbol to properly build
the reserved IRQs table. If define is not present, IRQ 0 (wifi) is
not reserved, causing interrupt allocation problems.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Update the HW models module to:
9eb489fdcde23d4f69ded78bca872bfc31b5ee79
Including the following:
9eb489f CLOCK (54): Add test interfaces to control duration and to fail
tuning
787d8c8 CLOCK (52,53): Add test interface control start duration
8bd3a5f NHW_54_AAR_CCM_ECB: Do not inform about the ECB being already
stopped
ca72ca7 RADIO: Add CodedPhy to old comment mentioning what is supported
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update to the latest CMSIS because some modules still use CMSIS (v5.x)
which when built with the latest toolchain returns below error in CI:
`error: pac_armv81.h: No such file or directory`
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
