Increase the timeouts to be 60 instead of 6.
The reason for this is that some controllers (like the Zephyr
controller) will reserve some of these to ensure stability,
and in fact with skip = 5 and retry = 6, it would still
send the PA reports at every interval.
To accomodate a higher timeout value, the functions used to
convert PA intervals to PA timeouts have been updated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Replace all instances of
nrf5340bsim_nrf5340_cpunet & nrf5340bsim_nrf5340_cpuapp
with
nrf5340bsim/nrf5340/cpunet & nrf5340bsim/nrf5340/cpuapp
In these samples/tests twister yamls definitions.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Replace the uses of the hwmv1 names in the samples documentation
with the corresponding hwmv2 ones.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For all samples which handle the nrf5340bsim in some special way
(for example in sysbuild files, or by checking what samples are
supported) handle also building with the hwmv2 names.
Also, let's fix the cmake info message in these respective
samples which tells the user which board target is used for which
part of the app.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The led-strip alias can be determined in the base dts file.
Remove from overlay files and aggregate to the base dts file.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Applying the modern way which is adding `default y` and
`depends on DT_HAS_...` to enable configs.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Removing `choice WS2812_STRIP_DRIVER` to enable the use of multiple
types of WS2812 drivers.
Also, `menuconfig WS2812_STRIP` will be deleted as it does not
correspond to the appropriate settings.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Added build configuration for the
CONFIG_MCUBOOT_BOOTLOADER_MODE_DIRECT_XIP_WITH_REVERT=n (non-default
option) to test building the smp_svr sample with statically defined
and registered SMP service.
Signed-off-by: Mateusz Kapala <mateusz.kapala@nordicsemi.no>
So that the sample does not get stuck forever waiting
for an echo packet that will never come.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
- Async UART would start receiving some data incorrectly
without HW RX byte counting at baud rates above 115200.
- Increase the UART buffer sizes to be able to receive
whole UART TXs of 1500 bytes sent by SLM at once.
- Remove the Kconfig items whose definition is now redundant.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
tflite-micro is an optional module now, and needs to be
pulled for the sample to build.
Fixes#69942.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Adds a sample file so that this sample is built in CI and removes
all configurations that do not build
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
http://www.analog.com/adt7420 does not exist anymore nor redirect to
https, so update the link to be https
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This current sentence would need to be clarified a bit
further to be really correct:
It is only when building with the host C library that it
applies, but with native_sim we can build with other
libC's.
The twister tests definitions are testing only with
embedded C libraries,
and there is anyway no harm if somebody defines the heap
size even if using the host libC.
So as such it would seem better to just remove this
sentence.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix board identifier in overlays for the lpcxpresso55s69_cpu0 target.
Board identifiers were renamed with the following command:
for file in $(find . -name "lpcxpresso55s69_cpu0.*"); do;
mv $file ${file/_cpu0/_lpc55s69_cpu0};
done
Additionally, remove lpcxpresso55s69_ns overlay targets where they are
no longer needed (or rename them where they are)
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This sample enables EVENTFD (through NET_SOCKETS_SERVICE)
which is not kconfig compatible with the old
NATIVE_APPLICATION targets (native_posix[//64])
Let's explicity filter out this platforms to avoid the
sample from failing to build
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
due to MQTT now have ALPN support
the example code of using ALPN to connect MQTT
over port 443 need to be added
Signed-off-by: sukrit buddeewong <sukrit.omu@gmail.com>
Both VEVIF and BELLBOARD test cases are unidirectional from the core
executing the test (cpuapp). For VEVIF, cpuapp pings, and for BELLBOARD,
cpuapp pongs.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The bonding info is not loaded after the Bluetooth
initialization again.
Call settings_load after the Bluetooth initialized.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
The broadcast audio sink now supports stereo if
CONFIG_TARGET_BROADCAST_CHANNEL=3 (LEFT | RIGHT).
It parses the BASE to find a set of BIS (1 or 2) that contain
the channel allocation from CONFIG_TARGET_BROADCAST_CHANNEL.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Documentation for IPM MCUX sample did not provide correct command for
building sample. To resolve this, add the "--sysbuild" argument to build
command documentation
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
In order to avoid defining almost the same overlays for different
sample codes and/or applications a common overlay file per
display interface is defined under the boards dts folder.
In doing so, an application/sample code will only have to
define another overlay explicitly under application's board
folder if more blocks are to be enabled. In either case, users
should explicitly invoke the requested overfiles at 'west build'
invokation by using the DTC_OVERLAY_FILE system variable.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
