Request fast global domain to run at 320 MHz during fast UARTE
activity. As request is asynchronous it cannot be called from
an ISR. Due to complexity to handle that without device runtime
power management a requirement is added so that if fast UARTE
is used device runtime PM must be enabled. Clock is request
and released in PM resume and suspended actions which in case
of fast UARTE are only called from thread context.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add requesting for global HFSLL when fast instance TIMER (e.g.
TIMER120 in nrf54h20) is used.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
- Add Flash HP support for ra6-cm4, ra6-cm33, ra4-cm33 (except
r7fa4w1ad2cng)
- Add config to set the minimal size of data which can be written
for RA4E2, RA4M2, RA4M3, RA6E1, RA6E2, RA6M1, RA6M2, RA6M3, RA6M4,
RA6M5
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Signed-off-by: Phi Tran <phi.tran.jg@bp.renesas.com>
- Bring macro defined of RA8 in flash_hp_ra.h to device tree
- Change to use irq_lock instead of semaphore for code flash
- Modify and add conditions to check and make decision to perform
action at last block.
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Signed-off-by: Tran Van Quy <quy.tran.pz@renesas.com>
Add an example for the `runners` section in the zephyr/module.yml file,
and a paragraph to the west "flash and debug runners" section.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add runners entry to the module schema and import the file specified.
Every class that inherits from ZephyrBinaryRunner will be discovered and
added to runners list.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This implements to generate the MAC address of the device UUID.
The UUID is hashed to reduce the size to 3 bytes.
Ideas taken from eth_nxp_enet.c
Adding dependencies on: HWInfo and CRC
Signed-off-by: Adib Taraben <theadib@gmail.com>
Clarify the impact of the various non-Apache-2.0 licensed files in the
tree.
Clean up the formatting to improve readability and better match the other
parts of the project documentation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This change adds support for segger rtt, similar to other supported
soc's. This was lacking when evaluating tracing.
Without this addition the system fails to build, indicating that
HAS_SEGGER_RTT is missing. Adding CONFIG_HAS_SEGGER_RTT in prj.conf is
not allowed.
Signed-off-by: Bart De Vos <bart.devos@verhaert.com>
Added integration_toolchains to allow building/testing with multiple
toolchains available in the environment.
This changes the output structure and adds another level in the path
under twister_out signifying the toolchain used. The toolchain used
(variant) is also part of the json output now.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The default SCK and COPI/MOSI pins on the Sparkfun Pro Micro RP2040
board correspond to `GPIO22` and `GPIO23` respectively[^1].
The existing pinctrl definitions in the `spi0_default` don't reflect
this (rather, they match the pinout of the Adafruit KB2040 MCU[^2]).
Update the board's respective pinctrl definitions to match the pinout.
[^1]: https://cdn.sparkfun.com/assets/e/2/7/6/b/ProMicroRP2040_Graphical_Datasheet.pdf
[^2]: https://learn.adafruit.com/assets/106984
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Add a new extension config value so that repo URL is not hardcoded in
the extension code.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some comprehensive lists were hard to read, improve the code a bit so
that things make more sense.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Modify the extension so that multiple Doxygen projects can be
referenced. While not required in upstream Zephyr, other users
downstream may require support for this feature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Modify the extension so that multiple Doxygen projects can be added.
While not required in upstream Zephyr, other users downstream may
require support for this feature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The extension had a some major design flaws, mainly:
- Ignored the `api_overview_doxygen_xml_dir` setting, instead it
"sniffed" doxyrunner properties, so violating environment boundaries
- Computation of Doxygen HTML path worked because of the hardcoded URL
in relative form found in doc/conf.py
This patch moves most code to the actual directive, so that context can
be obtained from the document being parsed. Also, the only config
required now is the Doxygen output dir, obtained from doxyrunner at
conf.py level.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
By default OpenThread uses storage API to store configuration options.
On for example mimxrt1020_evk the enabled by default is
CONFIG_SETTINGS_NONE when CONFIG_SETTINGS is enabled. Fix this problem by
using the CONFIG_SETTINGS_NVS=y.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Enable execution of i2c driver tests by adding i2c entry to
the list of supported peripherals.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Fixes issue introduced in #76460
The previous code attempted to detect whether TMAG5273 or TMAG3001 was
connected based on DEVICE ID register. This doesn't work as the bits that
denote the version on one part are undefined on the other part, and cannot
be relied on to be zero.
This commit adds a TMAG3001 compatible which (for now) is just derived from
the TMAG5273 compatible. This allows TMAG3001 to be specified directly in
the DT. The driver code is updated to support both compatibles.
Signed-off-by: Yiding Jia <yiding.jia@gmail.com>
The three sensor channels listed below were recently added by the commit
9471df95a5:
- SENSOR_CHAN_GAME_ROTATION_VECTOR
- SENSOR_CHAN_GRAVITY_VECTOR
- SENSOR_CHAN_GBIAS_XYZ
Theses channel names are missing and causes a system crash if the
SENSOR_LOG_LEVEL is set to DEBUG.
Also, the two sensor attributes SENSOR_ATTR_GAIN and SENSOR_ATTR_RESOLUTION
were added by the commit f849140de7.
This adds these missing channel and attribute to the list of names in the
sensor shell.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Update the driver to take the "vrefint-cal-resolution" property into
account when performing the calculations.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
After updating the "st,stm32-vref" binding with a new property containing
the calibration data resolution ("vrefint-cal-resolution"), update the
corresponding nodes in SoC DTSI files with the proper value.
Note that the property is not set on SoCs with resolution of 12, as it is
the default value specified for the property in the binding.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Add a property holding calibration resolution, similar to what already
exists in the st,stm32-temp-cal-common binding.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
The CCP API for the Call Control Profile works on top of the
TBS API, and will eventually replace parts of the TBS API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The previous re-organization has the zephyr-keep-sorted defines
missing. Add them for the I2C drivers and targets. Also
moved lines to fix out-of-order violations.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Remove v3.6 from the list of supported releases. Zephyr v3.6.0 reached
end-of-life on 2024-11-29.
Fixes: ea8bd5a09a
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
