This change adds net_context_port_in_use(), which is a simple
wrapper around net_context_check_port() and is used to check
if a particular socket is bound to a given IP address.
Fixes#29649
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Do not send the original pkt in 6lo based networks as in those
the IPv6 header is mangled and we would not be able to do any
resends of the original pkt. So for 6lo networks, clone the
pkt and send it to peer. The original pkt is kept in sent list
in case we need to resend to peer.
Fixes#29771
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Track the number of dropped TCP data segments and number of dropped
TCP packets in network statistics. It is useful to see these
numbers separately.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the peer ACKs data when it closes the connection, update
our sequence number accordinly. The connection would eventually
be terminated but this will avoid extra resends by the peer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When a connection is being closed, it is possible that the application
will have a lock to net_context and TCP2 connection lock. If we then
receive a final TCP2 ACK and close the connection, the locking order
get switched and TCP2 will first try to get its own lock and then the
net_context lock. This will lead to deadlock as the locking ordering
is now mixed.
The solution is to unref the TCP connection after releasing the
connection lock. The TCP connection unref function will anyway get the
lock so no need to do double locking.
Fixes#29444
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
using CONFIG_NET_BUF_POOL_USAGE monitor avail_count,
this variable should be protect.
Protecting it by using atomic variable
Signed-off-by: Ehud Naim <ehudn@marvell.com>
The commit 93e5181f ("net: context: Add locking for concurrent
access") added net_context locking to only IPv4 sockets.
That is not enough and we need locking also to other supported
socket address families like IPv6, SocketCAN and packet socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When we are sending ICMPv6 error message, we need to store the
link local addresses of the received packet somewhere in order
to know where to send the new error message.
Easiest is to store the ll addresses is to the error message
itself, just before where the sent packet will start in memory.
We cannot use the original pkt to store the ll addresses
as that packet might get overwritten if we receive lot of packets.
Fixes#29398
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are sending data directly, we already have TCP lock so
there is no need to do any locking. But when data is re-sent,
the work queue handler is doing the sending so we need to lock
the TCP connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When receiving data that needs to be passed the data to application,
queue it for short time so that we do not have TCP connection lock
held. This way if the application wants to send data, there is no
possibility that the connection lock would prevent sending data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Release the context lock before passing data to the application
socket as that might cause deadlock if the application is run
before the RX thread and it starts to send data and if the RX
thread is never able to run (because of priorities etc).
Fixes#29347
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net_icmp4_input() may net_pkt_unref() a packet. The header mustn't be
accessed after this or the system may crash.
Signed-off-by: Oliver Hitz <oliver@net-track.ch>
If there are more than one RX or TX threads, then make the name
of each of them unique so that it is easier to figure them out
in "kernel stacks" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Windows 10 sends ECN-Echo and Congestion Window Reduced (CWR) flags
together with SYN flag in the connection establishment but the code
did not ignore these flags and send just SYN back (instead of SYN|ACK).
This caused the connection establishement in application level to
fail as the application was never notified about it.
Fixes#29258
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Clip the timeout to 64 seconds, this avoids the timeout value to
increase to high values (e.g. several years).
Signed-off-by: Armand Ciejak <armand@riedonetworks.com>
This avoids code duplication. The same logic was present
in dhcpv4_send_request() and dhcpv4_send_discover().
Signed-off-by: Armand Ciejak <armand@riedonetworks.com>
The TCP2 was calling accept callback before actually finalizing
the connection attempt.
Fixes#29164
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The L4 connected/disconnected events are usually used to detect
when the application is connected to the network. Unfortunately
if the device has also a static address, then the connected event
might be created (for the static address) even if DHCPv4 is not
ready yet and application would not be able to connect (yet) to the
network. In order to allow the application to fine tune the network
connection creation, generate start, bound and stop events for DHCPv4.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The "tc" field which was holding the traffic class thread
priority is not used nor needed so remove it from the struct
to save some space.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No real need to assert when the send timer is cancelled. Just
check if there is re-transmission going on and do nothing if
there is not.
Fixes#28758
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The local and accepted socket was not bound which caused the
local address to be set as NULL. This then caused issues when
zsock_getsockname() was called by the application.
Fixes#28735
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Since the info parameter is only read from and never written the const
in the function parameter should be present.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
When compiling with CONFIG_NET_NATIVE=n and CONFIG_NET_OFFLOAD=n
then the following error is printed.
```
In file included from zephyr/subsys/net/ip/ net_if.c:23:0:
zephyr/subsys/net/ip/net_private.h: In function 'net_context_state':
zephyr/subsys/net/ip/net_private.h:58:27:
error: type of 'context' defaults to 'int' [-Werror=implicit-int]
static inline const char *net_context_state(context)
```
This add `struct net_context *` as type for context.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Remove obsolete include of the shell_uart.h file.
It is sufficient to include the shell.h file.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
We run various TCP function from work queue. Make sure the
connection lock is taken before accessing the connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of casting k_delayed_work directly to k_work, use the
k_work field name. This avoids warnings from Coverity and
allows the code to work even if the k_delayed_work fields are
re-ordered in the future.
Coverity-CID: 214346
Fixes#28659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add dependency to UDP in DHCPv4 Kconfig option as UDP is needed
in DHPCv4 to work properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Bug description:
When in tcp_conn_unref(), in case one of the delayed works is already
submitted to sysworkq (after delay period), e.g. send_timer, the check
of k_delayed_work_remaining_get() prevents calling
k_delayed_work_cancel().
This leads to corrupting sysworkq when zeroing struct tcp* conn.
Note that the "next" pointer for the work queue is part of the struct
work (in _reserved field). Which is, in this case, a member of struct
tcp.
Scenario leading to the bug:
(1) net_tcp_connect() is called from a work in sysworkq
(2) net_tcp_connect() submits conn->send_timer to sysworkq
(3) while net_tcp_connect() is waiting on connect_sem, delay period
passes (z_timeout) and send_timer enters sysworkq work slist
(4) also, some other code (app) submits more works to queue, now pointed
by conn->send_timer in sysworkq work list
(5) connection fails (no answer to SYN), causing a call to
tcp_conn_unref()
(6) tcp_conn_unref() is calling tcp_send_queue_flush()
(7) checking k_delayed_work_remaining_get(&conn->send_timer) returns 0
due to delay period end, but send_timer is still in sysworkq work
slist (sysworkq thread still hasn't handled the work)
(8) BUG!: no call to k_delayed_work_cancel(&conn->send_timer)
(9) back in tcp_conn_unref(), a call to memset(conn, 0, sizeof(*conn))
zeroes conn->send_timer
(10) conn->send_timer is pointed to in sysworkq work slist, but is
zeroed, clearing pointer to following works submitted in stage (4)
(11) EFFECT! the works in stage (4) are never executed!!
NOTES:
* k_delayed_work_cancel(), handles both states:
(1) delayed work pends on timeout and
(2) work already in queue.
So there is no need to check k_delayed_work_remaining_get()
* This is also relevant for conn->send_data_timer
Solution:
removing checks of k_delayed_work_remaining_get(), always calling
k_delayed_work_cancel() for work in struct tcp, in unref, before memset
Signed-off-by: David Komel <a8961713@gmail.com>
Since conn->send_data_total is of time size_t we need to use %zu or
we'll get build errors in sanitycheck on 64-bit platforms
Fixes#28605
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If the network driver for some reason did not set the data in
the network packet properly, then just drop it as we cannot do
anything with just plain net_pkt.
Fixes#28131
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is no handler for IPv4 broadcast packet, then ignore it
instead of trying to send an ARP message to resolve the senders
address.
Fixes#21016
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to have timer that closes the connection for good if
we do not get the FIN and ACK reponse from the peer.
If there is any pending data when application does close(),
send them before sending FIN.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is some error during connection creation, just bail
out in order to avoid null pointer access.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we try to send data but the sending window is full, then
try to kick the resend of the pending data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is no space in the sending window, then return -EAGAIN
so that the caller may try later.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We should have a max value for sending window so that application
is not able to use all our net_bufs for queueing packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
