Add the configuration for using the external FLASh Memory
and execute the samples/application_development/code_relocation_nocopy/
on the stm32f746g_disco board
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Define the configuration to run the code_relocation
application on the external memory xspi flash
of the stm32h573i_dk disco kit in XIP
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Define the configuration to run the code_relocation
application on the external memory dual quad flash
of the stm32h745i/stm32h750b disco kits in XIP
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Define the configuration to run the code_relocation
application on the external memory octo flash
of the stm32u585 or stm32h7b3i disco kit in XIP
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Use the Nordic QSPI NOR flash driver instead of the specific code
for the nRF5340 DK to initialize the external flash chip for XIP.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The init infrastructure, found in `init.h`, is currently used by:
- `SYS_INIT`: to call functions before `main`
- `DEVICE_*`: to initialize devices
They are all sorted according to an initialization level + a priority.
`SYS_INIT` calls are really orthogonal to devices, however, the required
function signature requires a `const struct device *dev` as a first
argument. The only reason for that is because the same init machinery is
used by devices, so we have something like:
```c
struct init_entry {
int (*init)(const struct device *dev);
/* only set by DEVICE_*, otherwise NULL */
const struct device *dev;
}
```
As a result, we end up with such weird/ugly pattern:
```c
static int my_init(const struct device *dev)
{
/* always NULL! add ARG_UNUSED to avoid compiler warning */
ARG_UNUSED(dev);
...
}
```
This is really a result of poor internals isolation. This patch proposes
a to make init entries more flexible so that they can accept sytem
initialization calls like this:
```c
static int my_init(void)
{
...
}
```
This is achieved using a union:
```c
union init_function {
/* for SYS_INIT, used when init_entry.dev == NULL */
int (*sys)(void);
/* for DEVICE*, used when init_entry.dev != NULL */
int (*dev)(const struct device *dev);
};
struct init_entry {
/* stores init function (either for SYS_INIT or DEVICE*)
union init_function init_fn;
/* stores device pointer for DEVICE*, NULL for SYS_INIT. Allows
* to know which union entry to call.
*/
const struct device *dev;
}
```
This solution **does not increase ROM usage**, and allows to offer clean
public APIs for both SYS_INIT and DEVICE*. Note that however, init
machinery keeps a coupling with devices.
**NOTE**: This is a breaking change! All `SYS_INIT` functions will need
to be converted to the new signature. See the script offered in the
following commit.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
init: convert SYS_INIT functions to the new signature
Conversion scripted using scripts/utils/migrate_sys_init.py.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
manifest: update projects for SYS_INIT changes
Update modules with updated SYS_INIT calls:
- hal_ti
- lvgl
- sof
- TraceRecorderSource
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: devicetree: devices: adjust test
Adjust test according to the recently introduced SYS_INIT
infrastructure.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: kernel: threads: adjust SYS_INIT call
Adjust to the new signature: int (*init_fn)(void);
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Despite the comment it contains, the initialization procedure for
the external memory chip on nRF5340 DK does not enable the High
Performance Mode in the chip, so communication using a frequency
higher than 8 MHz fails and the sample crashes (it works only right
after programming the chip with nrfjprog, which enables the High
Performance Mode, but the chip returns to the Low Power mode after
the board is power-cycled).
This commit fixes the initialization procedure and performs some
additional clean-up.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In order to bring consistency in-tree, migrate all samples to the use
the new prefix <zephyr/...>. Note that the conversion has been scripted:
```python
from pathlib import Path
import re
EXTENSIONS = ("c", "h", "cpp", "rst")
for p in Path(".").glob("samples/**/*"):
if not p.is_file() or p.suffix and p.suffix[1:] not in EXTENSIONS:
continue
content = ""
with open(p) as f:
for line in f:
m = re.match(r"^(.*)#include <(.*)>(.*)$", line)
if (m and
not m.group(2).startswith("zephyr/") and
(Path(".") / "include" / "zephyr" / m.group(2)).exists()):
content += (
m.group(1) +
"#include <zephyr/" + m.group(2) +">" +
m.group(3) + "\n"
)
else:
content += line
with open(p, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The nRF5340dk is shipping an external QSPI flash that can be used to do
XIP from. Extend the code_relocation nocopy sample to support this
platform so that part of the functions are executed from internal flash
and others from external flash.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
