The display blanking API mentions that display_blanking_on
and display_blanking_off should return -ENOSYS if it is not
implemented by the driver. It should not be considered as
an error since it might not be needed in order to have the
display work correctly.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Some OpenThread logs were moved from L2 to the OpenThread module,
so enable logging from there to keep previous logging visibility.
Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no>
Add usbd test feature to samd21/samr21_xpro boards.
Add samr21_xpro board to integration_platforms in a few samples.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Disable GPD for MCUBoot build, as it cannot be
reinitialized later in application (SDFW does not
support reinitialization).
Also, remove the GPD disabling from the mcumgr sample
for nRF54H20 iron board app - it was the reinitialization
that caused problems.
Signed-off-by: Michal Kozikowski <michal.kozikowski@nordicsemi.no>
- Remove duplicated conf/.overlay configuration for
mimmxrt1170_evk A and B revisions that have the same content.
- No change if .conf/.overlay have different content.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
- Sets MAIN_STACK_SIZE in prj.conf to 2048 (default is 1024)
to avoid possible stack overflow
and adding new .conf files per board.
- Deletes existing board .conf files, as they are not needed anymore.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Remove the source of non-determinism during emulation
by keeping terminal events reproducible between runs.
By using the mechanism of precise pause in Renode emulator
every interaction with terminal happens at the same virtual time
from the perspective of an emulated system, hence makes it independent
of the host. Otherwise the result of a test is susceptible to
the load on the host and robot process keywords' timing.
Renode emulator supports precise pausing when specified sequence of
characters is received on a terminal. Besides that,
char delay parameter is specified to set time interval between
consecutive characters entered in the terminal.
'Start Emulation' keyword is redundant, because 'Wait For'
keywords automatically continue emulation up to the nearest pause
event (e.g. matched pattern on the terminal).
Signed-off-by: Marek Slowinski <mslowinski@antmicro.com>
Remove the dependency on the system heap existing when enabling
`ZBUS_RUNTIME_OBSERVERS`. Instead the previously allocated memory is
required to be provided to `zbus_chan_add_obs` (which can still be
allocated through malloc).
Signed-off-by: Jordan Yates <jordan@embeint.com>
Allow compiler optimizations to remove High-Speed handling code. Knowing
that maximum operating speed is Full-Speed allows to reduce bulk buffers
from 512 to 64 bytes. More RAM optimizations are possible but this
commit only gets the low hanging fruits.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Having the log level set at debug causes a message to be printed
every time a mailbox message is sent or received. If we log this
using the RPMSG shell, then each message sent generates another
message, causing an an infinite message loop.
Do not set the level to debug by default, allow the level to
be set by the config LOG_DEFAULT_LEVEL.
Signed-off-by: Andrew Davis <afd@ti.com>
If an option is set in the project default configuration it does not
need to be set again in a board specific configuration overlay. Remove
instances of this.
Signed-off-by: Andrew Davis <afd@ti.com>
The message data field is currently empty, this works for some as the all
available virtqueues can be signaled when any message comes in on the host
side. For TI Mailbox and RemoteProc Linux drivers we do check the content
and expect the message to contain the correct Vring ID to signal.
Signed-off-by: Andrew Davis <afd@ti.com>
USB remote wakeup capability is a common feature of keyboards,
allowing them to wake up a suspended host. Currently there is no USB sample
that demonstrates remote wakeup, which makes basic evaluation of the
functionality non-trivial.
Modify the hid-keyboard sample with a minimalistic solution
of demonstrating remote wakeup capability. While it is not required to have
been configured prior to suspend to issue a wakeup request, from usability
perspective I'd say it makes sense.
Signed-off-by: Benedek Kupper <kupper.benedek@gmail.com>
remove the FATAL_ERROR message, and leave it just as a message.
also enhance filter for this case with "1pc0" anmd "1pc1"
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
ESP32xx appcpu board should only be built with procpu.
Stand alone AMP support makes no sense.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
For many devices iSerialNumber is not required. The only device class
currently supported in Zephyr that requires iSerialNumber is MSC. If the
serial number is not available then iSerialNumber must be 0. Failure to
read the string descriptor for non-zero iSerialNumber fails USB Command
Verifier Chapter 9 tests.
When USBD_DESC_SERIAL_NUMBER_DEFINE() was used without CONFIG_HWINFO
then it did lead to runtime failure when requesting the string (thus
failing certification).
Fail USBD_DESC_SERIAL_NUMBER_DEFINE() at build-time if CONFIG_HWINFO is
not set to prevent the surprise at runtime. Only define serial number
descriptors if CONFIG_HWINFO is enabled.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
openamp_rsc_table will run on the i.MX95 M7 core and can communicate
to the A55 that runs linux-imx.
Signed-off-by: Andre Heinemans <andre.heinemans@nxp.com>
TLS_CREDENTIAL_SERVER_CERTIFICATE credential type is misleading, as in
fact it just represents a public certificate, it does not matter if the
certificate belongs to a server or a client. And actually, it was
already used in-tree for clients as well, for example in LwM2M.
Therefore rename the credential type to a more generic
TLS_CREDENTIAL_PUBLIC_CERTIFICATE and deprecate the old one.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
hw_wdt_dev may not be NULL and the device not be ready to be used.
If that is the case we explicitely initialize task_wdt_init with
NULL and do not use hw watchdog.
Signed-off-by: Flavio Ceolin <flavio@hubblenetwork.com>
- adds the ability to change the NVS sample "Maximum reboot counter",
"Reboot countdown" and its "Sleep time" parameters via Kconfig,
without manually modifying the source code.
- reduces the default number of resets to 5 (was 400).
- adds the ability to reduce flash memory wear on real devices
by reducing the number of write iterations.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Added tests in order to verify the functionality of the
newly added fatfs fstab integration.
Signed-off-by: Carlo Kirchmeier <carlo.kirchmeier@zuehlke.com>
Co-authored-by: Carlo Kirchmeier <carlo.kirchmeier@zuehlke.com>
Co-authored-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The Adafruit Feather ESP32S3 is a development board in the Feather
standard layout, sharing peripheral placement with other devices labeled
as Feathers or FeatherWings. The board is equipped with an ESP32-S3 mini
module, a lithium ion battery charger and a USB-C connector. Compared to
the base model, this TFT variant additionally comes with a 240x135 pixel
IPS TFT color display.
Signed-off-by: Leon Rinkel <leon@rinkel.me>
Rework the sample to use the new USB device stack and the new DAP
backend and align the sample with the WebUSB sample which has a similar
BOS descriptor.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Rename the driver from uart_native_posix to uart_native_pty.
Including renaming the DTS compatible, and kconfig options, deprecating
the old ones.
And refactor the driver, generalizing it, so we can have any number of
instances.
Note that, unfortunately generalizing to N instances cannot be done
without a degree of backwards compatibility breakage: This driver was
born with all its configuration and selection of the instances based on
kconfig.
When the driver was made to use DT, it was done in a way that required
both DT and kconfig needing to manually coherently enable the 2nd UART.
This has now been fixed, which it means only DT is used to decide how
many instances are avaliable, and UART_NATIVE_POSIX_PORT_1_ENABLE is
just ignored.
Including:
* Deprecate UART_NATIVE_WAIT_PTS_READY_ENABLE: the options is always on
now as it has no practical drawbacks.
* Deprecate UART_NATIVE_POSIX_PORT_1_ENABLE: DTS intanciation defines it
being available now.
* Rename a few functions and in general shorten pseudo-tty/pseudo-
terminal to PTY instead of PTTY.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Almost all overlays only enable NVS and SETTINGS_NVS, something that
should be enabled in sample directly. Remove all overlays and make the
sample more genenric.
Use filter on storage partition to enable testing the sample on more
plaforms.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
