Identify when received PUBLISH message is malformed and overall packet
length received is smaller than parsed variable header lenght.
Add unit test to cover this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The standard allows up to 4 bytes of packet length data, while current
implementation parsed up to 5 bytes.
Add additional unit test, which verifies that error is reported in case
of invalid packet length.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
By changing the various *NET_DEVICE* macros. It is up to the device
drivers to either set a proper PM function or, if not supported or PM
disabled, to use device_pm_control_nop relevantly.
All existing macro calls are updated. Since no PM support was added so
far, device_pm_control_nop is used as the default everywhere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Using MQTT_UTF8_LITERAL() allows to reduce code and make it less error
prone, since utf8 length is calculated automatically by the macro.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Switch to `NET_SOCKET_REGISTER` mechanism over the offloaded API
registration.
Including the following fixes from the review:
* The fd returned by the socket accept call needs to be finalized,
similar to how it is done for socket creation.
* sl_RecvFrom() in TI SimpleLink Host driver does not support NULL
pointers for 'from' address and address length, and sl_SendTo() does
not ignore the destination address when in connection mode, so passing
NULL would cause a failure. These issues have been reported to TI
(CC3X20SDK-1970, CC3X20SDK-1971).
Let's use sl_Recv and sl_Send to implement recvfrom/sendto in the case
of NULL addresses.
* simplelink_poll() should not process negative file descriptors in the
fds array after sl_Selecti() returns. A negative fd value indicates
that the entry is invalid and should be ignored.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It's no longer needed to call `mqtt_input` after `mqtt_disconnect`.
Doing this will actually return an error as the MQTT connection is no
longer active after calling `mqtt_disconnect`.
Fixes#22360
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The application main() in Zephyr is defined as having a prototype:
void main(void), as expected by the kernel init (bg_thread_main).
So, correct the different samples and tests that were defined
otherwise.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The seasonal overhaul of test identifiers aligning the terms being used
and creating a structure. This is hopefully the last time we do this,
plan is to document the identifiers and enforce syntax.
The end-goal is to be able to generate a testsuite description from the
existing tests and sync it frequently with the testsuite in Testrail.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix unintended sign extension (SIGN_EXTENSION).
The result of "coap_block_size_to_bytes() * (iter - 1)"
extending the sign type.
Issue is the conversion of iter from u8_t to int because it's
an unsigned operand in an binary subtraction with 1 which is
a signed operand with higher conversion rank (int).
Fixes#20880Fixes#20881Fixes#20882Fixes#20883
Coverity CID :205780
Coverity CID :205786
Coverity CID :205806
Coverity CID :205808
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
After run Sanitycheck script I found out that
some test cases have a same test case name
in the test result .xml file.
For boards mimxrt1050_evk, qemu_x86, sam_e70_xplained
in .xml files that cases were dublicated.
Problem happened only with cases net.dns.no_ipv6.init
and net.dns.init. Only that cases were dublicated.
To solve it, I decided to change test cases names for the dns tests.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
The default main stack is too small for some boards so increasing
it to 2048. The issue was seen with sam_e70_xplained.
Fixes#19762
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is bad practice and may conceal issues on platforms
not in the whitelist.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We need to increase the stack size of the main thread, to
avoid stack overflow, when executing the tests on various
platforms.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
CONFIG_MAIN_STACK_SIZE was originally 1344 in this test. The following
commit removed setting the stack size in the test:
commit 7b3cd7d371
Author: Cami Carballo <cami.carballo@intel.com>
Date: Fri Jul 26 10:59:16 2019 -0400
tests: net: increase stack size
However getting the default stack size on FRDM-K64F of 512 causes the
following panic:
FATAL: ***** BUS FAULT *****
FATAL: Stacking error
FATAL: Imprecise data bus error
FATAL: NXP MPU error, port 3
FATAL: Mode: Supervisor, Data Address: 0x20002ff0
FATAL: Type: Write, Master: 0, Regions: 0x8200
FATAL: r0/a1: 0x00000000 r1/a2: 0x00000000 r2/a3: 0x00000000
FATAL: r3/a4: 0x00000000 r12/ip: 0x00000000 r14/lr: 0x00000000
FATAL: xpsr: 0x200002f4
FATAL: Faulting instruction address (r15/pc): 0x00000000
FATAL: >>> ZEPHYR FATAL ERROR 2: Stack overflow
FATAL: Current thread: 0x2000182c (main)
FATAL: Halting system
Bump stack back to original 1344 fixes the issue.
Fixes#18292
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This function uses mqtt_read_publish_payload_blocking to perform a
blocking read of the specified number of bytes.
When reading out a payload, the normal use case is to read the
entire payload. This function facilitates that use case.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It is convenient to have a blocking version of
`mqtt_read_publish_payload` function, for cases when it is called from
the event handler. Therefore, extend the 'mqtt_read_publish_payload'
argument list with information whether the call should block or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fixes the compile errors in various platforms like:
* sam_e70_xplained (too few network buffers)
* galileo, cc3220sf_launchxl and mps2_an385 (missing random number
generator configuration options)
Fixes#15878
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Unlike CONFIG_HW_STACK_PROTECTION, which greatly helps
expose stack overflows in test code, activating
userspace without putting threads in user mode is of
very limited value.
Now CONFIG_TEST_USERSPACE is off by default. Any test
which puts threads in user mode will need to set
CONFIG_TEST_USERSPACE.
This should greatly increase sanitycheck build times
as there is non-trivial build time overhead to
enabling this feature. This also allows some tests
which failed the build on RAM-constrained platforms
to compile properly.
tests/drivers/build_all is a special case; it doesn't
put threads in user mode, but we want to ensure all
the syscall handlers compile properly.
Fixes: #15103 (and probably others)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This lets us quickly filter tests that exercise userspace
when developing it.
Some tests had a whitelist with qemu_cortex_m3; change
this to mps2_an385, which is the QEMU target with an
MPU enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Various globals for the test cases have been moved to
the ztest memory domain data section via ZTEST_DMEM tags
so that user mode can access them.
Some anonymous arrays whose address was being placed in
the msg_subackX structs have been split out so they
are in ztest memory domain.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If the rc = -EAGAIN from mqtt_read_publich_payload(), it shouldn't be
used in memcpy() since it is a negative value, and instead, it should
try to read again.
Fix: #13825
Coverity-CID: 191002
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Port all users of 'set_conf_file' to use the built-in rules
instead. This follows the convention-over-configuration principle to
make the system as a whole simpler and more consistent.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Fixed typo: CONFIG_NET_NET_PKT_LOG_LEVEL_DBG, removed extra _NET.
Removed debug macro CONFIG_NET_DEBUG_NET_PKT that is not used.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
As the legacy library has been removed, we no longer need to
differentiate betwen MQTT implementations. Therefore align the library
folder name with other libraries and remove the `_sock` suffix.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As we are removing net_app and net_pkt based libraries and
applications, CoAP legacy based libraries and apps are moved
to socket based implementations. So removing legacy CoAP.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The disabled test causes crash in qemu_x86, so temporarily disable
it until a proper fix is found.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit makes the necessary changes to allow the following tests
to run on cc3220sf_launchxl:
- mqtt_packet
- mqtt_publisher
- mqtt_subscriber
- mqtt_pubsub
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The old legacy APIs use net-app library and as that is being
removed, then the dependencies need to be removed also.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove network specific default and max log level setting
and start to use the zephyr logging values for those.
Remove LOG_MODULE_REGISTER() from net_core.h and place the
calls into .c files. This is done in order to avoid weird
compiler errors in some cases and to make the code look similar
as other subsystems.
Fixes#11343Fixes#11659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Many tests use either Ethernet or Dummy L2 and as such require
modifications towards the driver API on their fake devices.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
