Some of the ARC platforms aren't consistent between kconfig and their
linker scripts as to the size of memory, add a special case.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The renode emulator is REALLY slow on this test, what completes in 20
seconds on qemu takes 4-10 minutes on renode. That's causing trouble
in CI.
And this is a CPU-bound unit test of library code, where we have
coverage for riscv32 via qemu anyway. There's no value to having
better platform emulation here.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
CONFIG_SRAM_SIZE is a kconfig value, which is an int (units of kb),
but when doing math on it to produce a memory buffer size needs to be
done in size_t precision otherwise we could overflow on 64 bit
platforms with >4G memory.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Use the white box validation and test rig added as part of the
sys_heap work. Add a layer that puts hashed cookies into the blocks
to detect corruption, check the validity state after every operation,
and enumerate a few different usage patterns:
+ Small heap, "real world" allocation where the heap is about half
full and most allocations succeed.
+ Small heap, "fragmentation runaway" scenario where most allocations
start failing, but the heap must remain consistent.
+ Big heap. We can't test this with the same exhaustive coverage
(many re/allocations for every byte of storage) for performance
reasons, but we do what we can.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Due to the use of UTIL_EVAL*() macros, the UTIL_LISTIFY() macro used
by DT_INST_FOREACH(foo) can cause long build errors when there is a
build error in the expansion for "foo". More than a thousand lines of
build error output have been observed for an error in a single line of
faulty C.
To improve the situation, re-work the implementation details so the
errors are a bit shorter and easier to read. The use of COND_CODE_1
still makes the error messages quite long, due to GCC generating notes
for various intermediate expansions (__DEBRACKET,
__GET_ARG_2_DEBRACKET, __COND_CODE, Z_COND_CODE_1, COND_CODE1), but
it's better than the long list of UTIL_EVAL notes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The original API was misnamed, as the intent was to provide a manager
that decoupled state management from the service that needed to be
turned on or off. Update all the names, shortening them where
appropriate removing unncessary internal components like _service.
Also remove some API that misled developers into believing that onoff
managers are normally expected to be exposed directly to consumers.
While this is a use case, in most situations there are service or
client-specific actions that need to be coupled to transition events.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
k_poll() for a signal is often desired for notification of completion
of asynchronous operations, but there are APIs where it may be
necessary to invoke "asynchronous" operations from contexts where
sleep is disallowed, or before the kernel has been initialized.
Extract the general notification solution from the on-off service into
a utility that can be used for other APIs.
Also move documentation out to a resource management section.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Extracted transition functions from onoff structure to external one
which allows to keep them in flash.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
And implement DT_ANY_INST_ON_BUS() in terms of it.
This makes some error messages quite a bit shorter by avoiding
UTIL_LISTIFY(), which has a nasty temper and tends to explode if not
treated gently.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This is joint work with Kumar Gala (see signed-off-by).
Add helper macros which abstract the "true names" of each of the four
types of node identifier we intend to support (e.g. DT_ALIAS(),
DT_INST()).
These can be passed to a new DT_PROP() macro which can be used to read
the value of a devicetree property given a node identifier from one of
these four other macros, and the as-a-c-token name of the property.
Add other accessor macros and tests as well.
Add some convenience APIs for writing device drivers based on instance
numbers as well. Drivers can "#define DT_DRV_COMPAT driver_compatible"
at the top of the file, then utilize these DT_INST_* macros to access
various property defines.
For example, the uart_sifive driver can do:
#define DT_DRV_COMPAT sifive_uart0
Then use DT_INST macros like:
.port = DT_INST_REG_ADDR(0),
.sys_clk_freq = DT_INST_PROP(0, clock_frequency),
For convenience working with specific hardware, also add:
<devicetree/gpio.h>
<devicetree/adc.h>
<devicetree/spi.h>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The newlib full malloc implementation (i.e. non-nano) requests a
relatively large 4096-byte memory chunk through `_sbrk`, which exceeds
the configured 512-byte heap size.
This commit changes `CONFIG_NEWLIB_LIBC_ALIGNED_HEAP_SIZE` from 512 to
8192 in order to increase the size of the heap memory used by the
newlib malloc function.
For more details, refer to the issue #21167.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
NEWLIB_LIBC_NANO defaults to y when building with a toolchain that
supports nano.specs and this was causing the libraries.libc.newlib
test to link with the newlib nano variant (libc_nano.a) when it should
be linking with the normal newlib (libc.a).
By setting CONFIG_NEWLIB_LIBC_NANO=n in prj_newlib.conf, we make sure
that the libraries.libc.newlib test links with the normal newlib.
For more details, refer to the issue #21167.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Coverity believes that a field is null when it isn't. Duplicate the
assert from 20 lines up in hopes it learns better.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
There are various situations where it's necessary to support turning
devices on or off at runtime, includin power rails, clocks, other
peripherals, and binary device power management. The complexity of
properly managing multiple consumers of a device in a multithreaded
system suggests that a shared implementation is desirable. This
commit provides an API that supports managing on-off resources.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
libc.newlibcnano test-case shall run with user mode
enabled, similarly to the remainder of the test-cases
in the tests/lib/mem_alloc test-suite.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Some minor typo and style fixes in the README file
of tests/lib/mem_alloc test-suite.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Some test cases have the same test case name.
To get rid of it, I decided to change test cases names
contained same names.
Please check my logic, how I give them names.
Usually trying to give name same as a directory folder.
There are still more test cases which necessary to change,
but I will make changes by small steps.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
We don't have to build an image for running test timeutil. We
can just build a native app to test it. So move it into "unit"
directory.
Also, add 64-bit support for unit testing framework.
Signed-off-by: Steven Wang <steven.l.wang@linux.intel.com>
Some modules use snprintk to format the settings keys. Unfortunately
snprintk is tied with printk which is very large for some embedded
systems.
To be able to have settings enabled without also enabling printk
support, change creation of settings key strings to use bin2hex, strlen
and strcpy instead.
A utility function to make decimal presentation of a byte value is
added as u8_to_dec in lib/os/dec.c
Add new Kconfig setting BT_SETTINGS_USE_PRINTK
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
There is absolutely no other test in the entire codebase that hardcodes
this setting. I found no comment or any other explanation why this test
should be unique. So it really looks like just a glitch introduced when
this test was added by PR #17618 / commit f1afb4c24d.
This was discovered in three different ways:
- COVERAGE=y adds the absolute and non-deterministic source path in
.rodata sections
- it adds .gnco files in the build directory
- it makes (some) tests run 10 times slower:
qemu_x86_64 lib/fdtable/libraries.os.fdtable PASSED (qemu 2.086s)
qemu_x86_long lib/fdtable/libraries.os.fdtable PASSED (qemu 2.316s)
qemu_xtensa lib/fdtable/libraries.os.fdtable PASSED (qemu 2.033s)
mps2_an385 lib/fdtable/libraries.os.fdtable PASSED (qemu *31.286s*)
qemu_x86 lib/fdtable/libraries.os.fdtable PASSED (qemu *31.862s*)
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Platforms with limited flash are now failing to link. Add or increase
flash requirements for test cases to exclude the ones that will fail.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The algorithm for converting broken-down civil time to seconds in the
POSIX epoch time scale would produce undefined behavior on a toolchain
that uses a 32-bit time_t in cases where the referenced time could not
be represented exactly.
However, there are use cases in Zephyr for civil time conversions
outside the 32-bit representable range of 1901-12-13T20:45:52Z through
2038-01-19T03:14:07Z inclusive.
Add new API that specifically returns a 64-bit signed seconds count, and
revise the existing API to detect out-of-range values and convert them
to a diagnosible error.
Closes#18465
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Several user mode tests cannot run on twr_ke18f because
either the platform does not have a sufficient number of
MPU regions required for the tests, or, the tests also
require HW stack protection (which has been, by default,
excluded in user mode tests for twr_ke18f board). We
excluded the board from all those tests.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Apparently the tests/lib/sprintf test requires more than 34kB
of code size, when building in MCIMX7_M4-based platforms. Such
platforms, however, only have 32kB of code memory, therefore,
we exclude them from this test.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This emulates a RISC-V in 64-bit mode on a SiFive FE310 dev board.
Memory is tight so a few tests had to be disabled due to the extra
memory usage compared to qemu_riscv32.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
These functions are useful for determining prefixes, as with file system
paths. They are required by littlefs.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
struct tm has fields that were not being set by the implementation,
causing the test to fail when the uninitialized values were compared
with a static initialized result. Zero the structure before filling it.
Closes#17794
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
