The board name for the nRF52840 Dongle, so far known as
nrf52840_pca10059, is renamed to nrf52840dongle_nrf52840. Its
documentation and all references to its name in the tree are updated
accordingly. Overlay and configuration files specific to this board are
also renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The board name for the nRF52833 DK, so far known as nrf52833_pca10100,
is renamed to nrf52833dk_nrf52833. Its documentation and all
references to its name in the tree are updated accordingly.
Overlay and configuration files specific to this board are also
renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
PWM and other flags were missing for PCA10059.
Aligned also RAM and Flash while comparing the files.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
We rename the nRF51 Dev Kit board target (nrf51_pca10028)
to nrf51dk_nrf51422. We update all associated references
in the supportive documentation and all nRF51-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The seasonal overhaul of test identifiers aligning the terms being used
and creating a structure. This is hopefully the last time we do this,
plan is to document the identifiers and enforce syntax.
The end-goal is to be able to generate a testsuite description from the
existing tests and sync it frequently with the testsuite in Testrail.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removed unused peripheral tag and add drivers to
include test to drivers sanity check run.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move adc.h to drivers/adc.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some configuration for the boards have to be added into test_adc.c file
so user can test driver with the test cases. Several nucleo boards are
added including F091RC/F103RB/F207ZG/F302R8/F401RE/F746ZG/L073RZ/L476RG.
And also ADC dts and pinmux configuration are added into boards own
pinmux.c and dts file.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
This adds generic support for any board using the SAM0 ADC driver.
The test selects the internal input from the scaled I/O voltage,
which is always available on the ADC.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Unlike CONFIG_HW_STACK_PROTECTION, which greatly helps
expose stack overflows in test code, activating
userspace without putting threads in user mode is of
very limited value.
Now CONFIG_TEST_USERSPACE is off by default. Any test
which puts threads in user mode will need to set
CONFIG_TEST_USERSPACE.
This should greatly increase sanitycheck build times
as there is non-trivial build time overhead to
enabling this feature. This also allows some tests
which failed the build on RAM-constrained platforms
to compile properly.
tests/drivers/build_all is a special case; it doesn't
put threads in user mode, but we want to ensure all
the syscall handlers compile properly.
Fixes: #15103 (and probably others)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This lets us quickly filter tests that exercise userspace
when developing it.
Some tests had a whitelist with qemu_cortex_m3; change
this to mps2_an385, which is the QEMU target with an
MPU enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We define a system heap and assign our resource pool
from it as k_poll() requires an implicit allocation.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Setting callbacks is forbidden from user mode.
Some heavier code changes will be needed to support
adc_read_async(), this patch just exposes the config
and read functions for now.
Test case updated to run partially in user mode.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Port all users of 'set_conf_file' to use the built-in rules
instead. This follows the convention-over-configuration principle to
make the system as a whole simpler and more consistent.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This commit adds a test case checking if ADC drivers can work properly
after discarding an invalid sampling request.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Apart from normal customizations of vendor specific parameters in ADC
configuration used in the test, a few more changes in test cases were
also introduced in commit 1bfa34f4fb.
This resulted in some parts of ADC API (like zero interval between
consecutive samplings) not being tested at all. This commit restores
the original behavior of the test cases (with added comments that
zero intervals are intentional).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Currently only nRF drivers need assignments of analog inputs to ADC
channels (ADC_CONFIGURABLE_INPUTS Kconfig option is activated only for
these drivers). Hence, there is no need to define ADC_xxx_CHANNEL_INPUT
labels for any other ADC driver as they will be ignored anyway.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The options selecting nRF drivers are now enabled by default when
an nRF SoC is selected as the build target.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
