Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Also replace some
config
prompt "foo"
bool/int
with the more common shorthand
config
bool/int "foo"
See the 'Style recommendations and shorthands' section in
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The instructions for samples/usb/dfu fail on Nordic platforms if the
erase is not progressive. Default to enable that on Nordic.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In order to unify the legacy and composite code, move the class and
vendor request handler buffer into the USB device code, just like in
composite mode. The option is renamed from USB_COMPOSITE_BUFFER_SIZE
into USB_REQUEST_BUFFER_SIZE and also replaces the USB_DFU_MAX_XFER_SIZE
and USB_HID_MAX_PAYLOAD_SIZE options.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Interface Association descriptor has to be used with Windows 7.
Add CONFIG_CDC_ACM_IAD option to force its usage, disabled by default.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Partially revert commit ea177e785ca3
("usb: dfu: set bwPollTimeout dynamically")
Introduced fix does not work proper because there is no way to be
sure that a control stage had success before start erase process.
Instead IMG_ERASE_PROGRESSIVELY configuration should be used
if the erase of the flash takes longer time.
resolves: #15497
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Use new method for defining USB CDC ACM devices using UTIL_LISTIFY and
device count from menuconfig.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Set bwPollTimeout for DFU_GETSTATUS request dynamically.
For now, adjust bwPollTimeout only during DNLOAD stage.
Fixes: #8734
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Use ringbuf library for handling RX CDC ACM path. Remove old code
artifacts handling specific hardware.
Fixes#14288
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
subsys/usb/Kconfig 'source's subsys/usb/class/Kconfig (which in turn
'source's subsys/usb/class/netusb/Kconfig) within an
'if USB_DEVICE_STACK', so the dependencies on USB_DEVICE_STACK added
within those files are redundant.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Generally when DFU is in progress, the system is not expected to
be doing anything else in addition. Hence, a completion signal
would help the system to know that DFU is over and it can proceed
towards next tasks.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
USB CDC ACM is a serial driver like another. Therefore select both
SERIAL_HAS_DRIVER and SERIAL_SUPPORT_INTERRUPT. This allows one to
enable the console driver without having to enable another serial
driver.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Consistently use
config FOO
bool/int/hex/string "Prompt text"
instead of
config FOO
bool/int/hex/string
prompt "Prompt text"
(...and a bunch of other variations that e.g. swapped the order of the
type and the 'prompt', or put other properties between them).
The shorthand is fully equivalent to using 'prompt'. It saves lines and
avoids tricking people into thinking there is some semantic difference.
Most of the grunt work was done by a modified version of
https://unix.stackexchange.com/questions/26284/how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some
of the rarer variations had to be converted manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Remove some 'default ""' properties on string symbols too.
Also make definitions more consistent by converting some
config FOO
<type>
prompt "foo"
definitions to a shorter form:
config FOO
<type> "foo"
This shorthand works for int/hex/string symbols too, not just for bool
symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add loopback function. This function can be used to test
USB device drivers and device stack connected to linux host
and has the similar interface as "Gadget Zero" [1] of the Linux
kernel.
Use modprobe usbtest to load the module, see also [2] for the
description of the tests and for Vendor and Product ID of the
"Gadget Zero". The userspace tool testusb [3] is needed to start
the tests.
[1] linux/drivers/usb/gadget/function/f_loopback.c
[2] linux/drivers/usb/misc/usbtest.c
[3] linux/tools/usb/testusb.c
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Remove all CONFIG_*_EP_ADDR options but keep the default
values for it, as they are necessary to find ep_addr in
usb_ep_cfg_data associated with bEndpointAddress in
interface descriptor.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Add support for enabling multiple disk interfaces (Flash, RAM)
simultaneously in Zephyr by introducing a simple disk interface
framework where we can register multiple disks which would
interface with different storage devices. This would enable us
to have multiple instances of FATFS in Zephyr.
Add support for mass storage drive disk name which will be
used as an argument when calling the disk interface API's.
Enable multiple volumes support configuration in
ELM FAT library.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
This patch moves USB DFU class driver to subsys/usb/class.
For the first the USB DFU class driver depends on DFU image
manager and partition layout and is limited to use as an
application for the bootloader. The driver fetches the
information about the flash, erase block size, write block
size and partitions offset from the DT now. The driver has
two interfaces associated with the two partitions "SLOT-0"
and "SLOT-1". The "SLOT-0" can only be read.
In the following work the class driver can be extended so
that it can be used from the bootloader and update a flash
region directly from the bootloader.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Sometimes we need to select Endpoint addresses manually to get it
working with certain USB controllers having limit for endpoints. In
this case default values break endpoint limit check. The proper
solution would be automatic endpoint allocation.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Disk IO functions are used by both FS and USB Mass Storage.
This patch refactors those from FS directory to a separate one.
In addition existing, config options were modified to make
stuff meaningful.
Jira: ZEP-1276
Change-Id: Ia2a2e18f3dbbbdb964c3dc0427d8138ad86134cd
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
This patch implements USB Mass Storage device Class,
which allows the Zephyr target Board to appear
as a USB drive to a host.
This code would invoke disk_read() /disk_write()
hooks which are to be provided by the storage
layer.
The Mass Storage protocol state machine is based on
mbed's implementation. We augment it by adding Zephyr's
USB transport and Storage APIs, and offload disk ops
to a fiber context rather than in the USB irq context.
origin: https://developer.mbed.org/users/mbed_official/code/USBDevice/file/01321bd6ff89/USBMSD
Jira: ZEP-233
Change-Id: I8199598c76da20ab20012d81dac7615f6a366303
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
