Same deal as in commit 41713244b3 ("kconfig: Remove '# Hidden' comments
on promptless symbols"). I forgot to do a case-insensitive search.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Also replace some
config
prompt "foo"
bool/int
with the more common shorthand
config
bool/int "foo"
See the 'Style recommendations and shorthands' section in
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add CONFIG_NET_TCP_AUTO_ACCEPT option which can be used to
automatically accept incoming data connection even if the
application has not yet called accept(). This can speed up
data transfer from peer to the application.
Problem with this is that if the peer sends lot of data and
we have limited amount of net_buf's available, then we can
run out of them which is very bad situation and can lead to
deadlocks. Because of this, the setting is turned off by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Calculate how long on average net_pkt has spent on its way from
application to the network device driver. The data is calculated
for all network packets and not just for UDP or TCP ones like in
RX statistics.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Calculate how long on average net_pkt has spent on its way from
network device driver to the application. The data is only
calculated for UDP and TCP network packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently the CONFIG_NET_ROUTING option has limited use as there
would be some entity that populates routing table. Previously it
was RPL that did it but RPL support was removed some time ago.
Fixes#16320
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to disable native IP stack and use offloaded IP
stack instead. It is also possible to enable both at the same
time if needed.
Fixes#18105
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit is an implementation of 6LoCAN, a 6Lo adaption layer for
Controller Area Networks. 6LoCAN is not yet standardised.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
The SO_TXTIME socket option can be used by the application to
tell the network device driver the exact moment when the
network packet should be sent.
This feature is also implemented in Linux.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Finalize the CONFIG_NET_CONTEXT_TIMESTAMP support that was started
earlier but never properly finished. We collect network statistics for
TX packet network stack throughput time from when the net_context_send
is called and when the net_pkt was sent out successfully by the network
device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make IPv4 and IPv6 address addition and removal possible from
userspace app. But allow this only if CONFIG_NET_IF_USERSPACE_ACCESS
By default these operations are not allowed from userspace app.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Having a checksum of zeros in UDP means "missing checksum" and is a
valid case as per RFC 768:
"An all zero transmitted checksum value means that the transmitter
generated no checksum (for debugging or for higher level protocols
that don't care)."
Such support is made possible by adding a new Kconfig option named
CONFIG_NET_UDP_MISSING_CHECKSUM.
However, that is valid only for IPv4. For IPv6, see the RFC 2460
section 8.1:
"Unlike IPv4, when UDP packets are originated by an IPv6 node, the UDP
checksum is not optional."
So the UDP checksum will always be verified in IPv6.
Fixes#16375
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There were various flaws in it that motivated its removal:
- No hash collision handling mechanism. In case that would happen, the
behavior of the network connection would be unknown. This is the main
drawback
- The lookup is not that much more efficient than the default one. The
only difference of gain is in connection comparison (a u32t comparison
vs a full connection compare). But the list handling is the same. It's
made worse by the presence of a negatives match array which can be
easily filled in and becomes then fully usless, appart from consuming
CPU. As well as adding a new connection: it requires the whole cache
to be cleared which is unefficient.
- Not memory efficient, even compared to a proper hash table.
Two arrays instead of one etc...
All of this could be fixed by using a proper hash table, though it
remains to be seen if such object could fit in Zephyr core.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Though core system is able to manage packet timestamping internaly (gptp
requires it for instance), it might be necessary to enable/disable
packet timestamping from net context directly.
Currently this will be only used by the tx timestamp test. So this
support is disabled by default. (And gptp does not require it anyway).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Some more were added since the cleanup pass in June 2018. See e.g.
commit 2d50da70a1 ("drivers: ipm: Kconfig: Remove redundant 'default n'
properties") for a motivation. It also avoids people wondering whether
or not they need to put in 'default n'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
No need to enable IPv4 any more as that is now optional.
This saves some memory as the application can work without
IPv4, IPv6, UDP or TCP.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is basically a dummy layer that just passes data through.
It is needed so that we can create CANBUS type network interface
to the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds basic packet socket support to net_context and
allows application to receive or send network packets in raw
format.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
These ones would support linearizing non-contiguous area, however
requiring a bit more complex type as an "accessor".
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These struct net_pkt allocators will give the possibility to allocate at
once the net_pkt and the buffer associated with, taking care of the
header space and MTU relevantly.
This enables to use the variable length allocator from net_buf. However,
it is not yet the default and is set as experimental.
As it is provided in parallel to existing allocators, it has to keep a
slab per-direction and thus a pointer in net_pkt, as well as appdata,
appdatalen etc... Resulting in "bloating" net_pkt. This will be solved
when, finally, former allocators will be removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The patch allows to enable logs for NET_RAW configuration.
For example using wpanusb currently breaks build with logging enabled.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Couple of findings which were revealed after changing
LOG_MODULE_REGISTER macro:
- missing semicolons after LOG_MODULE_REGISTER()
- missing LOG_LEVEL defines
- other
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Introduce new Kconfig option for selecting either slip or ethernet
connectivity to host.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of one global log level option and one on/off boolean
config option / module, this commit creates one log level option
for each module. This simplifies the logging as it is now possible
to enable different level of debugging output for each network
module individually.
The commit also converts the code to use the new logger
instead of the old sys_log.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CONFIG_NET_OFFLOAD was defined in Kconfig of net/ip/l2/, but actually
used by the code in net/ip/.
Fixes: #8646
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Up until now, Zephyr has patched Kconfig to use the last 'default' with
a satisfied condition, instead of the first one. I'm not sure why the
patch was added (it predates Kconfiglib), but I suspect it's related to
Kconfig.defconfig files.
There are at least three problems with the patch:
1. It's inconsistent with how Kconfig works in other projects, which
might confuse newcomers.
2. Due to oversights, earlier 'range' properties are still preferred,
as well as earlier 'default' properties on choices.
In addition to being inconsistent, this makes it impossible to
override 'range' properties and choice 'default' properties if the
base definition of the symbol/choice already has 'range'/'default'
properties.
I've seen errors caused by the inconsistency, and I suspect there
are more.
3. A fork of Kconfiglib that adds the patch needs to be maintained.
Get rid of the patch and go back to standard Kconfig behavior, as
follows:
1. Include the Kconfig.defconfig files first instead of last in
Kconfig.zephyr.
2. Include boards/Kconfig and arch/<arch>/Kconfig first instead of
last in arch/Kconfig.
3. Include arch/<arch>/soc/*/Kconfig first instead of last in
arch/<arch>/Kconfig.
4. Swap a few other 'source's to preserve behavior for some scattered
symbols with multiple definitions.
Swap 'source's in some no-op cases too, where it might match the
intent.
5. Reverse the defaults on symbol definitions that have more than one
default.
Skip defaults that are mutually exclusive, e.g. where each default
has an 'if <some board>' condition. They are already safe.
6. Remove the prefer-later-defaults patch from Kconfiglib.
Testing was done with a Python script that lists all Kconfig
symbols/choices with multiple defaults, along with a whitelist of fixed
symbols. The script also verifies that there are no "unreachable"
defaults hidden by defaults without conditions
As an additional test, zephyr/.config was generated before and after the
change for several samples and checked to be identical (after sorting).
This commit includes some default-related cleanups as well:
- Simplify some symbol definitions, e.g. where a default has 'if FOO'
when the symbol already has 'depends on FOO'.
- Remove some redundant 'default ""' for string symbols. This is the
implicit default.
Piggyback fixes for swapped ranges on BT_L2CAP_RX_MTU and
BT_L2CAP_TX_MTU (caused by confusing inconsistency).
Piggyback some fixes for style nits too, e.g. unindented help texts.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commits adds new priority to traffic class mappings and allows
users to choose which mapping to use through menuconfig.
The new mappings are recommended in 802.1 (chapter 34.5) for
time-sensitive applications supporting the credit-based sharper
algorithm.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Allow user to set the network interface into promiscuous mode
and then receive all the network packets that are received by
that interface.
Fixes#7595
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Remove some 'default ""' properties on string symbols too.
Also make definitions more consistent by converting some
config FOO
<type>
prompt "foo"
definitions to a shorter form:
config FOO
<type> "foo"
This shorthand works for int/hex/string symbols too, not just for bool
symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The subsys/net/ directory is more logical place for L2 code instead
of ip/ directory. No functionality changes by this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow creation of TX timestamp thread which will collect TX timestamp
information from device drivers. If the callback is registered, then
it will pass that timestamp information to the relevant party for
further processing. This support will be used by gPTP code in
subsequent commits.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Julien Chevrier <julien.chevrier@intel.com>
The 'source' of subsys/net/ip/Kconfig in subsys/net/Kconfig is already
within an 'if NETWORKING' block, so the NETWORKING dependency in
subsys/net/ip/Kconfig is redundant.
Remove the redundant dependency.
This gets rid of a bunch of 'NETWORKING && NETWORKING' dependencies in
the auto-generated Kconfig docs.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Previously, there was a boolean CONFIG_NET_TCP_TIME_WAIT setting
("master switch") and numeric CONFIG_NET_TCP_2MSL_TIME setting,
both named not ideally (there were both NET_TCP_TIME_WAIT and
CONFIG_NET_TCP_TIME_WAIT symbols in the source, with very different
meaning; "2MSL_TIME" was also a roundabout way to refer to
TIME_WAIT state time). In addition to that, some code was defining
adhoc, hardcoded duplicates for these settings.
CONFIG_NET_TCP_2MSL_TIME was also measured in seconds, giving
poor precision control for this resource-tying setting.
Instead, replace them all with the single
CONFIG_NET_TCP_TIME_WAIT_DELAY setting, measured in milliseconds.
The value of 0 means that TIME_WAIT state is skipped.
Fixes: #7459
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Some of the sanitycheck tests were having too small limit for
network buffers when compiling for sam_e70_xplained board.
Increase the buffer limits when testing this for this board.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With this commit it is possible to add priority to sent or received
network packets. So user is able to send or receive higher priority
packets faster than lower level packets.
The traffic class support is activated by CONFIG_NET_TC_COUNT option.
The TC support uses work queues to separate the traffic. The
priority of the work queue thread specifies the ordering of the
network traffic. Each work queue thread handles traffic to one specific
work queue. Note that you should not enable traffic classes unless
you really need them by your application. Each TC thread needs
stack so this feature requires more memory.
It is possible to disable transmit traffic class support and keep the
receive traffic class support, or vice versa. If both RX and TX traffic
classes are enabled, then both will use the same number of queues
defined by CONFIG_NET_TC_COUNT option.
Fixes#6588
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add context option support and implement PRIORITY option that
can be used to classify the network traffic to different trafic
classes according to said priority value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix Kconfig help sections and add spacing to be consistent across all
Kconfig file. In a previous run we missed a few.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
