This PR fixes#23482. The preamble size for a 2M phy was incorrect.
There is a bug in calculation of time for the DLE procedure:
the preamble size is incorrect for the 2M phy
Fixes#23482
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Fix regression in cancelling slave latency during Connection
Update Procedure.
Slave latency should not be applied between the ack of a
Connection Update Indication PDU and until the instant.
When caching was introduced, implementation missed this
consideration.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Simplify the Data Length Update Procedure state check when
processing incoming LENGTH_REQ/RSP PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add validation of channel map and hop increment value
received in CONNECT_IND PDU.
Zero bit count leads to controller assert or divide-by-zero
fault.
Hop increment shall be between 5 and 16 by BT Specification.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in handling tx pool corruption in relation to
commit 7a3e29af06 ("Bluetooth: controller: legacy: Fix Tx
pool corruption").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update LLCP handling during PHY update and Data Length update to not
start the LL control procedure if the remote has already indicated that
the procedure is not supported.
This fulfills the following requirement from the BT Core Specification
(Core_v5.2, Vol 6, Part B, Section 4.6):
Except where explicitly stated elsewhere in this specification, if the
peer Link Layer has indicated either during a feature exchange procedure
or by responding with an LL_UNKNOWN_RSP PDU that it does not support a
procedure, then the Link Layer shall not use that procedure.
Re-use the connection parameter request handling for PHY and
data length update procedures.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix missing first connection event due to first connection
event ticks_slot overlapping with the initiator window
ticks_slot.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix to return the max tx/rx time back to set default time
after using mandatory minimum PDU length and time while
switching back from Coded PHY to 1M PHY.
Also fixes#23109.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Data Length Update transmit and receive time calculation
on PHY update procedure completion.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix conditional compilation error when enabling
BT_CTLR_FAST_ENC for central only application builds.
Also added additional compilation to code exclusive to
central or peripheral role.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix local initiated Data Length Update procedure from being
stalled when a remote initiates a procedure with instant.
Fixes#23069.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Tx pool from being corrupted when rough central device
uses invalid packet sequence numbers, causing NULL pointer
to be released into free data Tx pool.
Fixes#22968.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix infinite recursion in host-based bt_rand function. This would call
HCI LE Random Number command, which would in turn call bt_rand, causing
an infinite recursion.
bt_rand -> prng_reseed -> BT_HCI_OP_LE_RAND -> le_rand -> bt_rand
To solve this issue the controller should avoid doing calls into the
host, so all calls to bt_rand in the controller should be replaced with
a call to a controller function.
Fixes#22202
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix tx_time calculation for the case that BT_CTRL_PHY is defined and
there has not been a feature exchange.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Low frequency and high frequency clocks had separate devices
while they are actually handled by single peripheral with single
interrupt. The split was done probably because opaque subsys
argument in the API was used for other purposes and there was
no way to pass the information which clock should be controlled.
Implementation changes some time ago and subsys parameter was
no longer used. It now can be used to indicate which clock should
be controlled.
Change become necessary when nrf5340 is taken into account where
there are more clocks and current approach would lead to create
multiple devices - mess.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fix LENGTH_RSP and PING_RSP to be send after Encryption
Setup under the cases where LENGTH_REQ or PING_REQ cross-
over with ENC_REQ in the same connection event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Overlapping Feature Exchange requested by host with
Encryption Setup requested by the application caused the
controller to corrupt its Tx queue leading to Tx Ctrl PDU
buffers from leaking from the system.
Relates to #21299.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit targets solving issue #17731 over the Nordic LL LEGACY
arch of the BLE stack in Zephyr. This functionality is exposed
to the user as HCI Zephyr Command extensions
- BT_HCI_OP_VS_WRITE_TX_POWER_LEVEL
- BT_HCI_OP_VS_READ_TX_POWER_LEVEL
which enable Tx power read/write operations within BLE radio events
on a per role/connection basis.
The functionality is enabled upon the Kconfig advanced configuration
triggered by
- BT_CTLR_TX_PWR_DYNAMIC_CONTROL
depending on the enablement of Zephyr HCI vendor-specific command
extensions.
Signed-off-by: Andrei Stoica <stoica.razvan.andrei@gmail.com>
Fix the implementation of slow encryption setup design
alternative to send ENC_RSP PDU before sending REJECT_IND
or REJECT_EXT_IND PDU.
Fixes#19917.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
On connection callback generated by host, application
reading the RSSI value by using HCI LE Read RSSI Command
received -127 dB as the first connection event has not
occured yet in order to measure the RSSI value.
Fix this by using the RSSI value of received advertising
PDU by the initiator, and using the RSSI value of the
received CONNECT_REQ PDU by the connectable advertiser as
the initial value at connection setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix connection update procedure to be cacheable if any other
local or remote control procedure is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Data Length Procedure to use Feature Exchange values to
send correct parameters based on whether Coded PHY is
supported by remote peer.
Relates to BT TS.5.1.1 tests:
LL/CON/MAS/BV-129-C
LL/CON/MAS/BV-130-C
LL/CON/SLA/BV-132-C
LL/CON/SLA/BV-133-C
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Check if the encryption procedure is in progress when receiving
rejection for the procedure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix issue in the handling of LL_REJECT_EXT_IND packets, this would look
at the procedures that are enqueued, and not the procedure that was
being rejected. This meant that although a reject was received for the
encryption procedure, the handling for a different control procedure was
run.
This would result in the link being terminated as control procedure
timer would time out for the encryption procedure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When not using ticker compatibility mode in legacy
controller, ticker job should not be disabled inside radio
events.
Ticker compatibility mode was introduced in
commit 3a9173afe1 ("bluetooth: controller: Revised ticker
for improved conflict resolution").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When compiling a sample like a beacon, none of the `if defined()`
statements in the switch case are actually compiled in, so the compiler
complains of an orphan mem_release();break; sequence.
Add a type that we know will always be compiled in in order to avoid
this issue.
Relates to commit 76bfea7cf9 ("Bluetooth: controller: Ensure that a
`case` statement is present").
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix a bug where in tx data PDU enqueued, while a ctrl PDU is
deferred due to Encryption setup being in progress, is
leaked causing HCI Tx Buffer Overflow crash.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix check in start encryption to disallow new encryption
setup while there is one already in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix MIC failure on re-encryption procedure when responding
at the same time to peer initiated feature request.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix control tx queue handling to correctly pause control PDU
responses during encryption setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to cache Data Length Procedure when
another control procedure is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Workaround, defer peer initiated encryption while local
initiated procedure with instant is not complete. Peer
master has sent CONN_UPDATE_IND in response to
CONN_PARAM_REQ, and also has initiated a Encryption Setup
thereafter. In this case, avoid corruption of the connection
update context by deferring the Encryption Setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation to correctly cache the control procedures
initiatable by local and peer. And, fix feature exchange and
version information procedures from being disallowed by
having then as cached requests to the controller.
Relates to #15256.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix reset of Encryption Procedure state on reception of
REJECT_IND and REJECT_EXT_IND.
This is a regression in commit 79cb615770 ("Bluetooth:
controller: split: Port Enc setup to be queueable")
Relates to #18578.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix an issue with enhanced connection complete event raised by the
advertiser role. The advertiser reported that it has resolved the
the identity address of the peer, even when the peer is connecting
using it's identity address.
The host will not have the correct on-air address type i.e public.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Enable use of settings system in controller and introduce settings for
company_id and subversion_number.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Fix the conditional compile of Data Length Update event
generation on PHY Update Procedure when Data Length
Extensions are not supported.
The regression was introduced in
commit 70a89876d0 ("Bluetooth: controller: Fix missing
data length update event")
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix bug in Data Length Update procedure that caused the
connection to drop due to the implementation sending bigger
PDU before the peer has acknowledged the receipt of Length
Response PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the controller implementation to perform connection
event length reservation based on the completed Data Length
Update and/or PHY Update Procedure.
This fix with avoid states/roles from stepping on each
others event length. Connection would have supervision timed
out or have stalled data transmissions due to insufficient
reserved air time.
Relates to #15171.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing generation of data length update HCI event when
effective tx and rx timings change due to PHY update
procedure.
Fixes BT LL TS 5.1.0 test:
LL/CON/MAS/BV-52-C [Master Receiving Data, LE Coded, CI
Change]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
