The radio on the VEGA platform will now be able to resolve Resolvable
Private Addresses through the use of the CAUv3 hardware. With this
patch the RPA feature is now fully supported on the Controller:
RPA addresses are generated with local IRK and resolved with
previously exchanged peer IRK.
Signed-off-by: Jeanina Dragusin <ancajeanina.dragusin@nxp.com>
Replace CONFIG_ENTROPY_NAME with DT_CHOSEN_ZEPHYR_ENTROPY_LABEL. We now
set zephyr,entropy in the chosen node of the device tree to the entropy
device.
This allows us to remove CONFIG_ENTROPY_NAME from dts_fixup.h. Also
remove any other stale ENTROPY related defines in dts_fixup.h files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This PR fixes#23482. The preamble size for a 2M phy was incorrect.
There is a bug in calculation of time for the DLE procedure:
the preamble size is incorrect for the 2M phy
Fixes#23482
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
For the ll code we know the exact entropy device as its the one for the
SoC that we are on. So use the new DT macro's to get the entropy device
via DT_INST rather than using CONFIG_ENTROPY_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The board target for emulation of nRF52810 on nRF5DK, so far
known as nrf52810_pca10040, is renamed to nrf52dk_nrf52810.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update implementation of master and slave LLL's to correctly
handle event counter values when latencies introduced due to
connection events cancelled by active events operating in
unreserved time space.
When an active radio event extends into unreserved time
space, and a connection event prepare is scheduled but at
the time of pre-emption timeout if the connection event is
cancelled then the event count and latencies needs to be
continiued to get acummulated.
In the current controller usecases the above scenarios does
not get exercised, the changes in this commit is needed for
future roles that can extend into unreserved time space and
would cancel a scheduled connection event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Most places used an int so that should have handled most cases but
keys_set was using an unsigned int, which meant that checking len > 0
is an expression that is always false, and the error handling is not
working.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix regression in cancelling slave latency during Connection
Update Procedure.
Slave latency should not be applied between the ack of a
Connection Update Indication PDU and until the instant.
When caching was introduced, implementation missed this
consideration.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in cancelling slave latency during Connection
Update Procedure.
Slave latency should not be applied between the ack of a
Connection Update Indication PDU and until the instant.
When caching was introduced, implementation missed this
consideration.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Simplify the Data Length Update Procedure state check when
processing incoming LENGTH_REQ/RSP PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Simplify the Data Length Update Procedure state check when
processing incoming LENGTH_REQ/RSP PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add validation of channel map and hop increment value
received in CONNECT_IND PDU.
Zero bit count leads to controller assert or divide-by-zero
fault.
Hop increment shall be between 5 and 16 by BT Specification.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add validation of channel map and hop increment value
received in CONNECT_IND PDU.
Zero bit count leads to controller assert or divide-by-zero
fault.
Hop increment shall be between 5 and 16 by BT Specification.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Remove use of k_cpu_idle in controller, and refactor the
implementation used to start, wait and stop clocks needed
by the controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
We rename the nRF51 Dev Kit board target (nrf51_pca10028)
to nrf51dk_nrf51422. We update all associated references
in the supportive documentation and all nRF51-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add header definition for bt_read_static_addr function. Declaring it
without a header definition will not give any compilation error when
function definition changes.
Refactor nRF SoC specific code into nRF specific source files and
provide weak definitions when these are not implemented. This will make
it easier to add handlers per vendor.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This reverts commit 8739517107.
Pull Request #23437 was merged by mistake with an invalid manifest.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
A bug in the PKT_US resulted in wrong calculations for the 2M phy.
Fixes the bug, verified on EBQ.
Also adds some defines for improved readability.
Fixes#23482
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Fix LLL implementation handling preemption of currently
active radio event with densely scheduled events in the
pipeline.
Preempt timeout was stopped without consideration to there
being more queued events in the pipeline. Also, added
chaining of preemption timeouts one after the other expiry
so as to preempt currently active events by the densely
scheduled events in the pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in handling invalid packet sequence in the
first packet in a connection.
This relates to commit 62c1e1a52b ("Bluetooth: controller:
split: Fix assert on invalid packet sequence")
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in handling tx pool corruption in relation to
commit 7a3e29af06 ("Bluetooth: controller: legacy: Fix Tx
pool corruption").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix response to unexpected LL_FEATURE_RSP for the case that
BT_CTLR_SLAVE_FEAT_REQ is disabled. Fixes LL/PAC/SLA/BV-01 for such a
configuration.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Update LLCP handling during PHY update and Data Length update to not
start the LL control procedure if the remote has already indicated that
the procedure is not supported.
This fulfills the following requirement from the BT Core Specification
(Core_v5.2, Vol 6, Part B, Section 4.6):
Except where explicitly stated elsewhere in this specification, if the
peer Link Layer has indicated either during a feature exchange procedure
or by responding with an LL_UNKNOWN_RSP PDU that it does not support a
procedure, then the Link Layer shall not use that procedure.
Re-use the connection parameter request handling for PHY and
data length update procedures.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix missing first connection event due to first connection
event ticks_slot overlapping with the initiator window
ticks_slot.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added the functions to turn on/off the radio from LLL.
Added WAKE_IRQ to start radio after it's out of DSM.
Signed-off-by: George Stefan <george.stefan@nxp.com>
Added the functions to turn on/off the radio.
Deep Sleep Mode (DSM)
Signed-off-by: Ionut Ursescu <ionut.ursescu@nxp.com>
Signed-off-by: George Stefan <george.stefan@nxp.com>
The radio on the VEGA platform supports both 1Mbps, as well
as 2Mbps BLE PHYs. It does not support coded BLE PHY. This patch
adds the necessary callback, as well as timings to enable the 2 Mbps
PHY support in the SW LL HAL for VEGA.
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Fix to return the max tx/rx time back to set default time
after using mandatory minimum PDU length and time while
switching back from Coded PHY to 1M PHY.
Also fixes#23109.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Data Length Update transmit and receive time calculation
on PHY update procedure completion.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix conditional compilation error when enabling
BT_CTLR_FAST_ENC for central only application builds.
Also added additional compilation to code exclusive to
central or peripheral role.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix local initiated Data Length Update procedure from being
stalled when a remote initiates a procedure with instant.
Fixes#23069.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Tx pool from being corrupted when rough central device
uses invalid packet sequence numbers, causing NULL pointer
to be released into free data Tx pool.
Fixes#22968.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When a must-expire ticker callback is executed, it is important not to
call the LLCP state machine, as the lazy state is unavailable. The code
must rely on the next proper event to call ull_conn_llcp with an updated
non-zero lazy count.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix EBQ tests for the Max Tx Time and Max Rx Time parameter.
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Bluetooth: controller: split: fixed for endianness
Added conversion to correct endianness
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Fix local initiated Data Length Update procedure from being
stalled when a remote initiates a procedure with instant.
Fixes#23069.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix a race condition in radio abort requested by flash
driver. It is possible that during abort function execution,
PPI setup to start radio fires. Hence, check explicitly in
cleanup function for radio being in use and disable it.
Fixes#22945.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix to remove assertion failure check on detecting invalid
packet sequence used by peer central and that no non-empty
packet was transmitted.
Fixes#22967.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
- avoid spourious radio interrupts by fixing ISR set,
waiting for idle, command configuration
- adjust counter to account for missing increment
- change preemption instant to avoid missing the deadline in LLL
- decrese EVENT_JITTER_US and
EVENT_TICKER_RES_MARGIN_US (same as Nordic)
Continuous scanning and connections are working fine now.
Signed-off-by: George Stefan <george.stefan@nxp.com>
Created unit tests for the encryption and decryption functions.
Tested with the peripheral and with central_hr samples.
Due to latency of CAUv3 when used as CCM inline accelerator
only one of the PDU can be encrypted/decrypted within an
bilateral exchange M->S + S->M in a connection event.
If the RXed PDU is encrypted, the TXed PDU must be empty
with More Data if there is data in the LLL queue.
The TXed PDU will be encrypted when an empty PDU is RXed.
Signed-off-by: Cristi Caciuloiu <cristian.caciuloiu@nxp.com>
