This patch adds the selection of the necessary CONFIG_*
options for allowing the use of privacy on VEGA platform
Signed-off-by: Jeanina Dragusin <ancajeanina.dragusin@nxp.com>
The board target for emulation of nRF52810 on nRF5DK, so far
known as nrf52810_pca10040, is renamed to nrf52dk_nrf52810.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Ticker is now fixed to avoid catch up of periodic timeout under
large ISR latencies.
Revert commit a749e28d98 ("Bluetooth: controller: split:
nRF: Use ticker compat mode as default").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
We rename the nRF51 Dev Kit board target (nrf51_pca10028)
to nrf51dk_nrf51422. We update all associated references
in the supportive documentation and all nRF51-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This patch adds the selection of the necessary CONFIG_*
options for allowing the use of the 2Mbps BLE PHY on
VEGA platform.
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
In Core v5.2, Vol 6, Part B, Section 4.6.9 it is stated that it is
mandatory to support the PHY procedure if any PHY other than 1M is
supported.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
For the time being this 2M is only selectable for !nRF51 platforms.
Coded PHY is only selectable for nRF platforms supporting Coded PHY.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Make BT_CTLR_OPTIMIZE_FOR_SPEED option so that it is not
user selectable for nRF51x series SoC with encrypted
connections support.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add Kconfig option to support building the controller
optimized for speed.
Fixes#21601.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the old ticker compatibility mode implementation as
default for nRF5x Series SoCs.
Fixes#22926.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Created unit tests for the encryption and decryption functions.
Tested with the peripheral and with central_hr samples.
Due to latency of CAUv3 when used as CCM inline accelerator
only one of the PDU can be encrypted/decrypted within an
bilateral exchange M->S + S->M in a connection event.
If the RXed PDU is encrypted, the TXed PDU must be empty
with More Data if there is data in the LLL queue.
The TXed PDU will be encrypted when an empty PDU is RXed.
Signed-off-by: Cristi Caciuloiu <cristian.caciuloiu@nxp.com>
BT_CTLR_SETTINGS should not depend on BT_SETTINGS as this will prevent
using settings system in the controller in a controller only build.
(BT_SETTINGS depends on BT_HCI_HOST)
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
SW based privacy is an implementation detail in the zephyr link layers.
Therefore it should not be visible when selecting an out-of-tree
controller.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
SMI TX is different than other controller features in that it does not
necessarily imply any software changes; whether SMI TX is supported
may be simply a matter of hardware calibration. This change supports
using the same software on chips that do or do not support SMI TX
depending on calibration.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
As a part of a ticker extension interface, it is now possible to specify
a slot_window when starting a ticker. When setting the
ticks_slot_window to a non-zero value, it is requested that the node
timeout is re-located to a position within the window, where the node
does not collide with other nodes - aligning to the end of the window.
The solution takes into consideration if a node has already been
updated with drift correction (e.g. ADV randomization), subtracting this
from the window.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Change adds missing Kconfig dependency.
The CONFIG_BT_CTLR_FILTER is used only for SW Link Layers.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Bluetooth sample with controller crypto, requires sys_rand32_get that
used to be linked with Tinycrypt. The selection, within Kconfig of
Tinycrypt, that has been enabling compilation of the symbol has
been removed and thus preventing controller crypto to link.
This commit moves the selection to BT_CTLR_CRYPTO.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix CONFIG_BT_CTLR_TX_BUFFER_SIZE value range to 251 Bytes
due to implementation limitation in use of u8_t for PDU
length fields in controller Tx buffers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This change prevents zephyr LL specific configurations to show up when
using an out of tree BLE controller.
BT_CTLR_ASSERT_HANDLER is used outside the controller as well,
so this is kept as is.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Added Kconfig option to conditionally compile in HCI command
parameter validation code.
When building a combined host plus controller application,
only validations in the host at the top level close to the
API caller is sufficient.
The controller validations are included in controller only
builds.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit targets solving issue #17731 over the LL_SW_SPLIT
arch of the BLE stack in Zephyr. This functionality is exposed
to the user as HCI Zephyr Command extensions
- BT_HCI_OP_VS_WRITE_TX_POWER_LEVEL
- BT_HCI_OP_VS_READ_TX_POWER_LEVEL
which enable Tx power read/write operations within BLE radio events
on a per role/connection basis.
The functionality is enabled upon the Kconfig advanced configuration
triggered by
- BT_CTLR_TX_PWR_DYNAMIC_CONTROL
depending on the enablement of Zephyr HCI vendor-specific command
extensions.
Necessary low-level radio HAL functionality and power definitions
are also supplied to address the high-level functionality of
controlling the Tx power.
Signed-off-by: Andrei Stoica <stoica.razvan.andrei@gmail.com>
Add support for Zero Latency IRQs, which avoids any Zephyr
OS or application influenced ISR latencies on the
controller's ISRs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the regression introduced as part of
commit 57d9411837 ("bluetooth: kconfig: disable some
options for openisa/RV32M1").
Also, prior to PR that introduced this regression, the Coded
PHY support selection was incorrectly depending on PHY update
support Kconfig BT_PHY_UPDATE. This was already fixed as part
the previous PR.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit enables support in bluetooth/controller/Kconfig
for nRF53 series of SoCs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
nRF5340 does not support a Radio TX power of 4dBm, so we
introduce a dependency for the respective Kconfig option
for TX power, so the option is never defined for nRF5340.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The Company ID concept is not restricted to the controller, and should
be part of the wider Bluetooth scope, so it can be used on a
controller-less device. It's used in multiple host level modules, most
notably the Bluetooth Mesh and Device Information Service.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Some Bluetooth options are currently not supported by the experimental
BLE SW LL implementation done on VEGABoard. As such, hide them from
the user altogether.
The full list of disabled config options is as follows:
- CONFIG_BT_PHY_UPDATE
- CONFIG_BT_DATA_LEN_UPDATE
- CONFIG_BT_HCI_VS
- CONFIG_BT_CTLR_LE_ENC
- CONFIG_BT_CTLR_CONN_PARAM_REQ
- CONFIG_BT_CTLR_EXT_REJ_IND
- CONFIG_BT_CTLR_SLAVE_FEAT_REQ
- CONFIG_BT_CTLR_LE_PING
- CONFIG_BT_CTLR_PRIVACY
- CONFIG_BT_CTLR_EXT_SCAN_FP
- CONFIG_BT_CTLR_CHAN_SEL_2
- CONFIG_BT_CTLR_ADV_EXT
- CONFIG_BT_CTLR_XTAL_ADVANCED
- CONFIG_BT_CTLR_SCHED_ADVANCED
- CONFIG_BT_CTLR_TIFS_HW
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
This patch updates the config files required to enable the
BLE SW defined controller to be built on RV32M1 SoCs. Only the split
version is supported.
Signed-off-by: George Stefan <george.stefan@nxp.com>
Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
Signed-off-by: Ionut Ursescu <ionut.ursescu@nxp.com>
Having a pin toggle when the code reaches a certain point
is really useful for debugging; the infrastructure is already
in place for Nordic boards, so just build upon and enable the
mechanism on the Vega board as well.
Signed-off-by: David Leach <david.leach@nxp.com>
A single connections may take up to 4 buffers at the same time. Make
number of connections that support this worst-case number
configurable.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Added in commit 1475402d41 ("Bluetooth: controller: Introduce ULL LLL
architecture"), then never used.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix Kconfig conditional include of Minimum Channels Used
and Channel Selection Algorithm #2.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added support for vendor specific meta data in LLL node_rx_hdr. This
enables vendors to add "footer" data to the RX PDU, for supporting
specialized BLE features.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Added support for vendor specific meta data in LLL conn object. This
enables vendors to add state data to connection, for supporting
specialized BLE slave features.
Signed-off-by: Morten Priess <mtpr@oticon.com>
When not using ticker compatibility mode in legacy
controller, ticker job should not be disabled inside radio
events.
Ticker compatibility mode was introduced in
commit 3a9173afe1 ("bluetooth: controller: Revised ticker
for improved conflict resolution").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Nordic nRF52811 SoC has a 2.4GHx Radio which supports
LE Coded PHY, so we add the option to build a BLE
Controller for nRF52811 platforms with LE Coded PHY
support.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Changed documentation in Bluetooth Controller
Kconfig for BT_CTLR_ASSERT_HANDLER
Signed-off-by: Kristoffer Rist Skøien <kristoffer.skoien@nordicsemi.no>
Disable Advertising Extensions by default, since they are not really
operational and they take RAM.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Changed ticker behavior to resolve conflicts in ticker_worker instead of
in ticker_job. This allows better real-time slot allocation, as well as
allowing callbacks even if ticker node doesn't get air-time (for audio
stream housekeeping). A priority property now also allows prioritizing
one ticker node over others.
Compatibility mode enables lagacy ticker behavior if needed.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Enable use of settings system in controller and introduce settings for
company_id and subversion_number.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Make the Upper and Lower Link Layer split architecture
implementation of the controller as the default when
building Zephyr Bluetooth Low Energy controller support
in applications.
Noticeable missing feature (porting) in comparison to old
architecture implementation is, Advanced scheduling of
connection events.
The missing features will subsequently be submitted
upstream.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rename the controller Kconfig option BT_LL_SW to
BT_LL_SW_LEGACY in preparation towards switch to new Link
Layer implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
