When merging files, make sure to remove header rows from each file and
just keep one header. This will stop us from parsing header rows as
tests.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add named exceptions instead of a generic one. Should help point to the
right issue when something goes wrong.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is joint work with Kumar Gala (see signed-off-by).
This supports a new devicetree macro syntax coming. It's not really
worth mixing up the old and the new generation scripts into one file,
because:
- we aim to remove support for the old macros at some point, so it
will be cleaner to start fresh with a new script based on the old one
that only generates the new syntax
- it will avoid regressions to leave the existing code alone while
we're moving users to the new names
Keep the existing script by moving it to gen_legacy_defines.py and
changing a few comments and strings around. It's responsible for
generating:
- devicetree.conf: only needed by deprecated kconfigfunctions
- devicetree_legacy_unfixed.h: "old" devicetree_unfixed.h macros
Put a new gen_defines.py in its place. It generates:
- zephyr.dts
- devicetree_unfixed.h in the new syntax
Include devicetree_legacy_unfixed.h from devicetree.h so no DT users
are affected by this change.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If the #address-cells property for a register is 0 than we set the addr
value of the reg to None. Similar, if #size-cells is 0 than we set the
size value to None for the reg.
Fixup kconfigfunctions.py to handle reg.size and reg.addr being None.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This rename is mostly to easy git managment and review so any changes or
the addition of the new gen_defines.py doesn't look like a diff against
the old code if you look at just that commit.
We keep changes to a minimum to just keep things building with the
renamed gen_legacy_defines.py.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This returns the entire logical {name: Node} dictionary which is
currently being accessed element by element via chosen_node(name).
It will be used in a new gen_defines.py for moving the handling of
chosen nodes into C from Python.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We used the column 'passed' as a boolean to signify pass or fail,
however we do have other states that need to be tracked.
Remove the boolean and use a text field instead that has the status as a
string.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When running 1 specific test, counting was off. Combine functions adding
tests into one and optimize filtering.
Fixes#22270
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We rename the nRF51 Dev Kit board target (nrf51_pca10028)
to nrf51dk_nrf51422. We update all associated references
in the supportive documentation and all nRF51-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Split up requirements.txt into several files so that CI tools can
utilize/reference the specific requirements-<FOO>.txt they may need
while keep things in sync with the development. This is to reduce
both time and amount of work CI actions due to python package install.
Create the following groupings:
1. BASE - needed to build or create zephyr images
2. BUILD-TEST - need to run compile/build tests
3. DOC - need to build the docs
4. RUN-TEST - need for runtime testing
5. EXTRAS - optional or useful for development/developers workflow
Also tried to add a comment about what or why a given package is being
pulled in for.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This never needed to be put in a separate gperf table.
Privilege mode stacks can be generated by the main
gen_kobject_list.py logic, which we do here.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Private type, internal to the kernel, not directly associated
with any k_object_* APIs. Is the return value of z_object_find().
Rename to struct z_object.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rather than stuffing various values in a uintptr_t based on
type using casts, use a union for this instead.
No functional difference, but the semantics of the data member
are now much clearer to the casual observer since it is now
formally defined by this union.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
add lstrip function to delete the '\r' char in front of the
serial output from serail readline, because this '\r'
will influence the result match function in harness.py.
Signed-off-by: peng1 chen <peng1.chen@intel.com>
The README file was in need of clarification how to set up the
net-tools Docker image and how the IP addresses were assigned.
mqtt_publisher is also mentioned.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
With net-tools and the mqtt_publisher sample updated, add support
for running the sample with the network sample test script.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
This change removes the hardcoded subsystem list in gen_kobject_list.py
favor of marking the relevant driver API structs with the _subsystem
sentinel.
Signed-off-by: Corey Wharton <coreyw7@fb.com>
This change extends the parse_syscalls.py script to scan for a
__subsystem sentinal added to driver api declarations. It thens
generates a list that is passed into gen_kobject_list.py to extend
the subsystems list. This allows subsystems to be declared in the
code instead of a separate python list and provides a mechanism for
defining out-of-tree subsystems.
Signed-off-by: Corey Wharton <coreyw7@fb.com>
Add a function takes a 'label' and returns "y" if we find an
"enabled" node that has a 'nodelabel' of 'label' in the EDT
otherwise we return "n"
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Pad node identifiers to 60 characters. This results in better
alignment in practice than the current value of 40, which is a bit
low.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This too is an attempt to reimplement the previous behavior exactly,
modulo the order in which things are defined.
This is the last function which is calling into the previous
implementation's out_node and node_*_alias() functions, so these can
be removed now.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is similar to the work already done for regs.
Other than the order in which they appear and comments, the output
before and after this patch should be exactly the same.
We're intentionally leaving some of the helpers in module scope here
to use some of the subroutines elsewhere later on when reworking
write_spi_dev().
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Mirror the change already done to write_regs().
Other than the order in which they appear and comments, the output
before and after this patch should be exactly the same.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use augmented nodes to print macros grouped by namespace.
Other than the order in which they appear and comments, the output
before and after this patch should be exactly the same.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Group the macros together by namespace rather than putting all the
BASE_ADDRESS macros together and all the SIZE macros together. E.g.,
all the DT_INST_<x> namespace macros for each node now appear
consecutively.
Add a comment making it clear that this output comes from "regs",
since "BASE_ADDRESS" and "SIZE" are not property names.
Other than the order in which they appear and comments, the output
before and after this patch should be exactly the same.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add additional attributes to each edtlib.Node we process, before
calling into the write_foo() routines.
This includes the identifier returned by node_ident(), which is used
as the primary identifier for the node, as well as lists for instance
and aliases nodes, and a catchall list that contains all the other
identifiers in addition to the primary one.
Use this information in a new for_each_ident(node, ident) def that
will be put to use in the various write_foo() routines.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
spi_dev_cs_gpio() takes a Node and returns the chip select GPIO for it.
Having that information available directly from Node is neater, so turn
it into a Node.spi_cs_gpio property instead.
That gets rid of the only public global function in edtlib, which might
make the API design clearer too.
Tested with the sensortile_box board, which uses SPI chip select.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
It's better to allow per-instance EDT configuration than to set a global
variable on the edtlib module. Enable/disable the warning for reg/unit
address mismatches via a flag to EDT.__init__(), instead of via a global
variable. That makes it consistent too.
Another option would be to pass the 'dtc' flags to EDT.__init__(), but
it makes the interface a bit ugly. Maybe if it needs to emulate lots of
other flags later.
Clarify that edtlib itself isn't meant to have any state in the comment
at the top of the module.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Enhance error reporting by returning immediately when the calling
function reports an error.
Signed-off-by: Andrei Laperie <andrei.laperie@intel.com>
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Return the final return value from Docker script when running echo
client in the container, first for UDP and then TCP, for both IPv4
and IPv6.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The header printed at the beginning of every west build is kind of
annoying. Let's remove it and just print the application source
directory at cmake time instead. The build directory and board are
already printed there, anyway, and that's all IDE users will see.
Let's clean up the BOARD to make it say "board" instead. That matches
the west build --board option name a bit more closely and is still
legible.
Likewise, let's not print any west build messages if we're just
incrementally recompiling. That's noisy.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
When checking build directory against cache on windows, certain
corner cases can end up failing the comparison because of case
difference on an otherwise identical path. This can be avoided
by ignoring case on windows.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
The 'command' command line argument for this flasher is now being
overridden by common code, which attaches the west subcommand name to
this.
Let's just hotfix this by renaming the argument in misc-flasher.
We can revisit the boundary between run_common.py arguments and
runners package arguments after the release.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Try to make it clearer what's going on here.
Suggested-by: Lucian Copeland <hierophect@gmail.com>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is yet another bug introduced by the move to runners.yaml.
Sigh. I should have tested this better.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This will also make the reason for a following bug fix easier to see.
Update a comment block to include all the work that needs doing.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This makes its true value clearer, and will make a later bug fix patch
easier to understand.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Due to cleanups in west targeted at getting rid of zephyr-specific
code, extension commands can no longer rely on ZEPHYR_BASE being set
in the calling environment at import time (it's still set at run()
time for now, though, to keep west build working).
Add a new helper to make dealing with this easier from west sign.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Refactor the code to support the new runners.yaml file created by the
build system.
Compared to fishing around in the CMake cache, this makes it trivial
to put all the command line arguments to a runner-based command on
equal footing, regardless of if they're defined in the runners package
proper or defined in run_common.py.
This allows board.cmake files to do things like this:
board_set_runner_args(foo
--bin-file=${PROJECT_BINARY_DIR}/my-signed.bin)
While at it, make some other cleanups:
- Stop using the obsolete and deprecated west.cmake module while we're
here in favor of the zcmake.py module which was added to Zephyr a long
time ago. Yikes. I had forgotten this was still here.
- Stop using west.util's wrap function in favor of raw use of
textwrap. The west function splits on hyphens, which is breaking
runner names like "em-starterkit".
- Clean up the --context output a bit
Fixes: #22563
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit updates the section names for memory size calculation in
the sanitycheck script as follows:
1. Remove `_TEXT_SECTION_NAME_2` section, which no longer exists, from
the `rw_sections`.
2. Add `rom_start` section, which mostly contains read-only data such
as the exception vector table, to the `ro_sections`.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
We used to use "em-starterkit" runner for ARC which is
basically heavy-modified "openocd" runner tweaked to
use GDB for loading and starting Elf files.
Now when loading and running Elf files is possible with generic
"openocd" runner we may us it. So we switch and get rid of
"em-starterkit" as well since we no longer need it.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
In some cases especially for on-going development & debugging of real
application it might be useful to load and run not from flash but
from RAM in that case there's one catch: we cannot reset the board
after loading memory with our app.
That's because:
a) RAM we use might be either cleared on reset or might enter
unpredictable state with portion of previously loaded data
being corrupted.
b) Reset vector most probably still point to ROM/flash and so
our current application won't be executed on reset.
So instead of "run reset" command of OpenOCD we'll use
"resume 0x12345678". Where 0x12345678 is our application's
entry-point (which BTW may very well not match beginning of
the .text section or link base).
Now to extract the entry-point we need our application's zephyr.elf
and since we already have a requirement for Elf we may use it for
loading because OpenOCD does it perfectly fine moreover automatically
detecting loaded image type (binary, hex, Elf etc).
And to use that nice feature just add "--use-elf" to west's
command-line for boards that use "openocd" runner. Like that:
----------->8--------------
west flash --use-elf
----------->8--------------
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
To be used in setups with multiple boards attached to the same one
host we need to have an ability to specify precisely which JTAG probe
to use for a particular board.
This is done by passing "ftdi_serial XXX" command to OpenOCD.
And the serial ("XXX") is supposed to be passed from higher level,
typically via west's options. And exactly for that we add another
"openocd" runner option "--serial=XXX" which sets
a Tcl's "_ZEPHYR_BOARD_SERIAL" variable that later gets passed
to OpenOCD's "ftdi_serial" command.
See more discussions on the matter here:
https://github.com/zephyrproject-rtos/zephyr/issues/22543
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Remove 'git-spindle' as there are not users in any scripts or build
system and not references in any of our docs.
Remove 'wheel' as nothing seems to use or need it directly.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The west command line output is not stable and has changed for 0.7.
Match it in zephyr_module.py's check for whether we are in a
workspace.
The real fix is to start using 'west topdir' whenever the west version
is at least 0.7.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The syscall exception frame was stored on the CPU struct during
syscall execution, but that's not right. System calls might "feel
like" exceptions, but they're actually perfectly normal kernel mode
code and can be preempted and migrated between CPUs at any time.
Put the field on the thread struct.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We only need pyserial python module if we are doing device testing.
Treat it similar to how we treat tabulate module.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The SDK has a new path for x86 gcov, point to the new binary. Also, do
not clean artifacts when running coverage.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The 'command' variable points at a python command object, not a
string. Take its name so the help text for west flash -h correctly
says 'flash' instead of 'debug'.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add a 'deprecation_msg' string/flag to out_dev(). When 'deprecation_msg'
is passed, all generated macros include
__WARN(<deprecation_msg>)
which prints a custom warning if the macro is used.
Meant to be used when improving the output format.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Replace running west command tests in run_ci.sh with a github workflow.
This provides some benefits in that we can run the west command tests on
multiple python versions and host OSes (linux, mac and windows).
Also have the benefit that the tests are only run on modifications to
files in scripts/west_commands/ or scripts/west-commands.yml.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add script for usb backend to receive tracing stream data. This
script, trace_capture_usb.py, is based on pyusb, so install it
correctly before using the script.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Add script to capture tracing stream data with UART backend. This
script is developed based on pyserial, so install it correctly
before using the script.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Since we do interger division to determine how many items are in each
set, its possible we can have bad rounding error and the last set having
a much larger amount of items compared to all other sets.
For example, total = 3740, sets = 300:
per_set = 3740 / 300 = 12.466 = 12
last_set = 3740 - 299 * 12 = 152
So instead of doing simple division, we add on extra item to the early
sets and we've exhausted the rounding error:
num_extra_sets = total - per_set * sets
140 = 3740 - 12 * 300
So the first 140 subsets will have 13 per_set, and the last 160 will
have 12 per_set.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Single-bus warning in python parsing of device tree is suppressed if
this is also suppresed in the device tree compiler.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Change the key function used to sort nodes so that unit addresses, if
present, break ties between sibling nodes. This orders siblings in
increasing order by unit-address in any gen_defines output that is
sorted by ordinal.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This makes the results easier to read, since node output appears in
the same order as the top level comment summarizing the tree.
Reorganize how flash partitions are emitted so they also appear in
dependency order, allowing us to extend the comment at the top of the
file to say that nodes are emitted in that order, along with other
useful information.
Print comments even for nodes that are disabled or have no binding,
to make it clearer that the script considered them and decided not to
output anything for them.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add a script that sets up Docker networking and starts the net-tools
Docker container. If successful, run Zephyr with native_posix and
execute the appropriate net-tools container executable. The proper
net-tools executable and arguments is selected depending on the
basename of the sample directory. This script needs to be updated
if the net-tools Docker image is updated in some incompatible way.
The net-tools directory is assumed to exist at the same level as
the Zephyr base directory, but its location can be set using the
'-N' command line argument. Likewise, '-Z' sets the Zephyr top level
directory.
When stopping Zephyr, go through all child processes since running a
native posix or other variant of Zephyr may cause a hierarchy of
processes to be created.
Fixes: #19540
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Overlay files were concatenated into single string with no whitespace
between them. If '--extra-args OVERLAY_CONFIG="overlay-1.conf"
--extra-args OVERLAY_CONFIG="overlay-2.conf"' was used, then the result
was OVERLAY_CONFIG="overlay-1.confoverlay-2.conf".
Another thing was that overlay extra args were not properly removed from
the list of regular arguments. As a result we had incorrect list of
overlays and incorrect list of other arguments.
Rework code to extract overlays in loop in a safe manner. Use for that a
list of strings instead of string directly. Join those strings and form
a single OVERLAY_CONFIG argument just before running cmake.
Tested with following testcase.yaml line:
extra_args: ARG1 OVERLAY_CONFIG="overlay-1.conf"
ARG2 OVERLAY_CONFIG="overlay-2.conf"
Before this patch we got:
args = ['OVERLAY_CONFIG="overlay-1.conf"',
'OVERLAY_CONFIG="overlay-2.conf"']
After this patch we get:
args = ['ARG1', 'ARG2',
'OVERLAY_CONFIG="overlay-1.conf overlay-2.conf"']
While at it, fix also regex pattern by removing requirement of double
quotes around value. Match any option value instead and strip both
single and double quotes when match is positive. Tested with:
$ ./scripts/sanitycheck -T samples/hello_world/ -p qemu_x86 \
--extra-args OVERLAY_CONFIG=overlay1.conf '
--extra-args OVERLAY_CONFIG=\"overlay2.conf\" '
--extra-args OVERLAY_CONFIG=\'overlay3.conf\'
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Change the output during CMake configure from
Devicetree configuration written to .../devicetree.conf
Parsing /home/ulf/z/z/Kconfig
Loaded configuration '.../frdm_kw41z_defconfig'
Merged configuration '.../prj.conf'
Configuration saved to '.../.config'
to
Devicetree header saved to '.../devicetree_unfixed.h'
Parsing /home/ulf/z/z/Kconfig
Loaded configuration '.../frdm_kw41z_defconfig'
Merged configuration '.../prj.conf'
Configuration saved to '.../.config'
Kconfig header saved to '.../autoconf.h'
devicetree_unfixed.h is more useful to be aware of than devicetree.conf
(still hoping we can get rid of it at some point), and seeing the
Kconfig header clarifies things to.
"Saved" instead of "written" for consistency. Maybe it could say
"Kconfig configuration" instead of "configuration" too, though it gets a
bit spammy in other contexts where the message shows up.
Updates Kconfiglib (and menuconfig/guiconfig, just to sync) to upstream
revision 061e71f7d7, to get this commit in, which is used to print the
header path:
Return a message from Kconfig.write_autoconf()
Like for Kconfig.write_config() and Kconfig.write_min_config(),
return a string from Kconfig.write_autoconf() with a message saying
that the header got saved, or that there were no changes to it. Can
be handy in tools.
Also make the "no change" message for the various files more
specific, by mentioning what type of file it is (configuration,
header, etc.)
Return True/False from Kconfig._write_if_changed() to indicate if
the file was updated. This also allows it to be reused in
Kconfig.write_min_config().
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add error checking in zephyr_module.py so that if the user manually
specifies ZEPHYR_EXTRA_MODULES and the list contains something that
isn't in fact a valid module, we scream and die.
This should help with diagnosing module errors.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add a new --check-missing-config-prefix check that looks for references
like
#if MACRO
#if(n)def MACRO
defined(MACRO)
IS_ENABLED(MACRO)
where MACRO is the name of a defined Kconfig symbol but doesn't have a
CONFIG_ prefix. Could be a typo.
Skip MACRO if it is #define'd somewhere, even if it looks like a Kconfig
symbol.
Found e.g. https://github.com/zephyrproject-rtos/zephyr/pull/22195.
Piggyback skipping binary files when grepping for Kconfig symbol
references.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
So that the EDTT tool could be used by this script,
set its path so other scripts could find it
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Only dump data when we are interested in the analysing coverage. By
default just collect the data.
CONFIG_COVERAGE_DUMP is used to control this behaviour.
This will help speed up sanitycheck and will avoid lots of noise in the
log when some tests with coverage enabled failed. Dumping data to
console is also suspected to be one of the reason why qemu hangs in CI.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If 'imgtool' is not found in PATH look for 'imgtool.py' before bailing
out.
This allows adding the mcuboot/scripts directory to PATH and have
'west sign -t imgtool' automatically locate the 'imgtool.py' script.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add a '--dts-out <file>' flag to gen_defines.py that saves the final
devicetree to <file>, in DTS format, using the new EDT.dts_source
attribute.
Handy to have available as a debugging aid. Unused otherwise.
Also write a dummy <BOARD>.dts_compiled file that tells people to look
at zephyr.dts, for people that might be used to that file. It was
removed in commit 8d8b06978c ("dts: Remove generation of
<BOARD>.dts_compiled").
Fixes: #22272
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Include the "warning: "/"error: " part of the string when wrapping
lines, and consistenly start messages with a capital letter.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
