Convert driver to use new DT_INST macros throughout. Removed per
instance Kconfig symbols and replaced with DT_NODELABEL references where
needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Those are used only in tests, so remove them from kernel Kconfig and set
them in the tests that use them directly.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This application was initially intended to be a manual, interactive
sample, run by a user. However, it's also a useful real-world
integration test, to be run in automated CI systems. So, provide
a config suitable for such a usage: use local host machine as a
server (to not depend on availability and characteristics of an
Internet connection), and have a concrete completion criteria
(by limiting number of iterations; given that performance of TCP
is not to be not too high, limit it to just 1 for now).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Initially, this was intended to be a sample for manual "burnout"
testing, e.g. see if a device with it can run for 24hrs, or download
1GB of data, or similar.
It's however also useful for automated CI testing, but then we need
to have more specific completion criteria. So, allow to specify
number of download iterations via local Kconfig.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
To streamline management of multiple test configurations (which
now can go into separate config/overlay files instead of patching
source).
Note that now that this option is introduced, it must be set to
a correct value for any Zephyr config, thus we set it in
overlay-tls.conf. But the sample also supports building under a
POSIX environment (using Makefile.posix), which doesn't use
Zephyr's config system, so suitable defaults still should be
present in the C source file.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Mention in websocket API documentation that the timeout value
is in milliseconds. Check timeout values properly using K_TIMEOUT_EQ()
macro.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use k_timeout_t internally, no change to user API.
Clarify the documentation of the timeout parameter that it is
in milliseconds.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use 64-bit time in order to avoid overlaps, and do not use K_MSEC()
as that will convert to k_timeout_t which we do not want in this
case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove prompts from Kconfig options `UART_x_NRF_UART*` that select
the type of nrfx driver (for UART or UARTE peripheral) to be used
for a given instance. This prevents the options from being modified
from configuration files.
Instead, make one of these options selected by default according to the
"compatible" property set for the corresponding UART node in devicetree.
This eliminates the need of changing both the "compatible" property in
devicetree and the Kconfig option selecting the driver type when a user
wants to switch between UART and UARTE for a given instance.
Since all `UART_x_NRF_UART*` options are made "hidden" by this commit,
all their occurrences in configuration files are removed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Even though radio driver can report in its capabilities that it does
support CSMA CA, there's no way in the driver to select how the frame
should be transmitted (with CSMA or without). As layers above radio
driver (Thread, Zigbee) can expect that both TX modes are available, we
need to extend the API to allow either of these modes.
This commits extends the API `tx` function with an extra parameter,
`ieee802154_tx_mode`, which informs the driver how the packet should be
transmitted. Currently, the following modes are specified:
* direct (regular tx, no cca, just how it worked so far),
* CCA before transmission,
* CSMA CA before transmission,
* delayed TX,
* delayed TX with CCA
Assume that radios that reported CSMA CA capability transmit in CSMA CA
mode by default, all others will support direct mode.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit removes the Kconfig MAC address configurations for the
`sam_e70_xplained` board, as these have been migrated to use the device
tree configurations.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The MAX_PAYLOAD_SIZE must reflect the size of COAP_BLOCK_x. This is
necessary becase BLOCK size represents max payload size. The current
value create inconsistencies for coap lib. The same way,
MAX_DOWNLOAD_DATA must allocate sufficient space for MAX_PAYLOAD_SIZE
plus all space for coap header etc.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This is a follow-up to commit 4253eae005.
The board known earlier as nrf52840_pca10056 is now named
nrf52840dk_nrf52840.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Just to get something to test for PM, via frdm_k64f board. So only this
board will get PM enabled.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In addition to the existing plain TCP MQTT test, add the same test
with TLS applied. Robert Lubos provided the updated test_cert.h, which
contains the same certificate as in the echo samples.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
OpenThread NCP sample application.
Tested on FRDM-K64 with RF2XX connected via USB to a Linux machine
running wpantund.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Cloud to device communication supported with simple
subscribe topic details. Details are added for how to send
messages from cloud.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
No use starting the application if the network interface is down.
So start to listen connection management events and start the
TCP and UDP handlers only after network is up and ready.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Modify the mqtt_publisher sample app to return an exit code after
its tests have been run. Add Kconfig options to set the number of
test iterations per TCP connection as well as the number of TCP
connections to make to the server while keeping the default values
intact. Further add a config overlay file to lower the number of
TCP connections and test iterations used.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Without it, the sample crashes for qemu_x86 with:
[00:00:03.080,000] <err> os: Page fault at address 0x7275632f
(error code 0x10)
[00:00:03.080,000] <err> os: Linear address not present in page tables
[00:00:03.080,000] <err> os: PDPTE: Non-present
...
Increase by reasonable, but small amount, to keep watching stack usage
growth trends in Zephyr.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Once the MQTT ping response has been received from the server, the
application is then notified with the MQTT_EVT_PINGRESP event.
Signed-off-by: PK Chan <pak.kee.chan@nordicsemi.no>
In order to run the TTCN-3 based sanity check, add a TCP
sample app and instructions for running the sanity check.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Add information about how to build and test atsamr21_xpro board with
IEEE 802.15.4 RF2xx driver.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
