The current context preservation implementation saves the spsr and
lr_irq registers, which contain the cpsr and pc register values of the
interrupted context, in the thread callee-saved block and this prevents
nesting of interrupts because these values are required to be part of
the exception stack frame to preserve the nested interrupt context.
This commit reworks the AArch32 non-Cortex-M context preservation
implementation to save the spsr and lr_irq registers in the exception
stack frame to allow preservation of the nested interrupt context as
well as the interrupted thread context.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Out-of-tree code can still be using the old file locations. Introduce
header shims to include the headers from the new correct location and
print a warning message.
These shims should be removed after two releases.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit renames the `cortex_r` directory under the AArch32 to
`cortex_a_r`, in preparation for the AArch32 Cortex-A support.
The rationale for this renaming is that the Cortex-A and Cortex-R share
the same base design and the difference between them, other than the
MPU vs. MMU, is minimal.
Since most of the architecture port code and configurations will be
shared between the Cortex-A and Cortex-R architectures, it is
advantageous to have them together in the same directory.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This reverts commit 8739517107.
Pull Request #23437 was merged by mistake with an invalid manifest.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
This never needed to be put in a separate gperf table.
Privilege mode stacks can be generated by the main
gen_kobject_list.py logic, which we do here.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
z_arm_exc_exit (z_arm_int_exit) requires the current execution mode to
be specified as a parameter (through r0). This is not necessary because
this value can be directly read from CPSR.
This commit modifies the exception return function to retrieve the
current execution mode from CPSR and removes all provisions for passing
the execution mode parameter.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The current AArch32 (Cortex-R and to-be-added Cortex-A) interrupt
system relies on the multi-level interrupt mechanism and the
`irq_nextlevel` public interface to invoke the Generic Interrupt
Controller (GIC) driver functions.
Since the GIC driver has been refactored to provide a direct interface,
in order to resolve various implementation issues described in the GIC
driver refactoring commit, the architecture interrupt control functions
are updated to directly invoke the GIC driver functions.
This commit also adds support for the Cortex-R cores (Cortex-R4 and R5)
that allow interfacing to a custom external interrupt controller
(i.e. non-GIC) by introducing the `ARM_CUSTOM_INTERRUPT_CONTROLLER`
configuration that maps the architecture interrupt control functions to
the SoC layer interrupt control functions.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
We rename the z_arm_int_lib_init() function to
z_arm_interrupt_init(), aligning to how other
ARCHes name their IRQ initialization function.
There is nothing about 'library' in this
functionality, so we remove the 'lib' in-fix.
The commit does not introduce any behavior changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We introduce a macro to define the IRQ priority level for
PendsV, and use it in arch/arm/include/aarch32/exc.h
to set the PendSV IRQ level. The commit does not change
the behavior of PendSV interrupt.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds some documentation for the exception
priority scheme for 32-bit ARM architecture variants.
In addition we document that SVCall priority level for
ARMv6-M is implicitly set to highest (by leaving it as
default).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Public arm/aarch32/exc.h header file is used by both
Cortex-M and Cortex-R; we update the header information
accordingly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit fixes the improper naming of the ROM sections.
1. Rename the first ROM section, which was previously named using the
`_TEXT_SECTION_NAME` definition, to `rom_start`, as this section does
not actually represent the text section.
2. Rename the second ROM section, which was previously named
`_TEXT_SECTION_NAME_2` which supposedly refers to the definition of
the same name that does not exist, to `_TEXT_SECTION_NAME`. Note that
this is indeed the section that contains the text section from the
source image.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit cleans up the linker.ld file for the Cortex-R arch.
* Convert all TAB characters to SPACE.
* Fix insane placement of curly brackets.
* Fix overall text alignments.
* Remove the special handlings for the Cortex-M devices that were
copied from `include/arm/aarch32/cortex_m/scripts/linker.ld`.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit fixes incorrect Cortex-R interrupt lock, unlock and state
check function implementations.
The issues can be summarised as follows:
1. The current implementation of 'z_arch_irq_lock' returns the value
of CPSR as the IRQ key and, since CPSR contains many other state
bits, this caused 'z_arch_irq_unlocked' to return false even when
IRQ is unlocked. This problem is fixed by isolating only the I-bit
of CPSR and returning this value as the IRQ key, such that it
returns a non-zero value when interrupt is disabled.
2. The current implementation of 'z_arch_irq_unlock' directly updates
the value of CPSR control field with the IRQ key and this can cause
other state bits in CPSR to be corrupted. This problem is fixed by
conditionally enabling interrupt using CPSIE instruction when the
value of IRQ key is a zero.
3. The current implementation of 'z_arch_is_in_isr' checks the value
of CPSR MODE field and returns true if its value is IRQ or FIQ.
While this does not normally cause an issue, the function can return
false when IRQ offloading is used because the offload function
executes in SVC mode. This problem is fixed by adding check for SVC
mode.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Instead of having TI_CCFG_PRESENT as a symbol that's only defined in
soc/arm/ti_simplelink/cc13x2_cc26x2/Kconfig.defconfig.series and y when
SOC_SERIES_CC13X2_CC26X2 is enabled, turn it into a helper symbol that's
selected by SOC_SERIES_CC13X2_CC26X2.
This avoids having a symbol that's only defined in a Kconfig.defconfig
file, which is confusing. It also makes things a bit more generic, in
case other boards with CCFGs are added.
Also rename it to HAS_TI_CCFG to be consistent with other helper
symbols, and add a help text.
Flagged by scripts/kconfig/lint.py.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In zephyr_linker_sources().
This is done since the point of the location is to place things at given
offsets. This can only be done consistenly if the linker code is placed
into the _first_ section.
All uses of TEXT_START are replaced with ROM_START.
ROM_START is only supported in some arches, as some arches have several
custom sections before text. These don't currently have ROM_START or
TEXT_START available, but that could be added with a bit of refactoring
in their linker script.
No SORT_KEYs are changed.
This also fixes an error introduced when TEXT_START was added, where
TEXT_SECTION_OFFSET was applied to riscv's common linker.ld instead of
to openisa_rv32m1's specific linker.ld.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
This commit does the following:
- renames the 'text' ROM section to 'rom_start', to reflect
that this section is the first section of the image.
- renames the 'TEXT_SECTION_NAME_2' section to 'text', since
that section (whose start is pointed by _image_text_start)
holds the entire image text section.
The commit removes the confusion by having multiple ROM sections
named as 'text' in ARM Cortex-M builds.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
We should not use indentation for pre-processor directives.
This commit fixes the indentation in the ARM Cortex-M linker
script.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.
dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.
The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.
Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.
hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit addresses the following issues:
1. Add a new Kconfig configuration for specifying Dual-redundant Core
Lock-step (DCLS) processor topology.
2. Register initialisation is only required when Dual-redundant Core
Lock-step (DCLS) is implemented in hardware. This initialisation is
required on DCLS only because the architectural registers are in an
indeterminate state after reset and therefore the initial register
state of the two parallel executing cores are not guaranteed to be
identical, which can lead to DCCM detecting it as a hardware fault.
A conditional compilation check for this hardware configuration
using the newly added CONFIG_CPU_HAS_DCLS flag has been added.
3. The existing CPU register initialisation code did not take into
account the banked registers for every execution mode. The new
implementation ensures that all architectural registers of every
mode are initialised.
4. Add VFP register initialisation for when floating-point support is
enabled and the core is configured in DCLS topology. This
initialisation sequence is required for the same reason given in
the first issue.
5. Add provision for platform-specific initialisation on Cortex-R
using PLATFORM_SPECIFIC_INIT config and z_platform_init function.
6. Remove seemingly pointless and inadequately defined STACK_MARGIN.
Not only does it violate the 8-byte stack alignment rule, it does
not provide any form of real stack protection.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commits implements the support for dynamic direct
interrupts for the ARM Cortex-M architecture, and exposes
the support to the user as an ARM-only API.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Before introducing the code for ARM64 (AArch64) we need to relocate the
current ARM code to a new AArch32 sub-directory. For now we can assume
that no code is shared between ARM and ARM64.
There are no functional changes. The code is moved to the new location
and the file paths are fixed to reflect this change.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
