Add support for the IP_MULTICAST_LOOP socket option to control
multicast packet loopback.
Signed-off-by: AbdElRahman Khalifa <abdelrahman.5alifa@gmail.com>
Add support for the IPV6_MULTICAST_LOOP socket option.
This option allows enabling or disabling the consumption of multicast
packets by the sender. By default, the socket option will be enabled.
Co-authored-by: Pieter De Gendt <pieter.degendt@gmail.com>
Signed-off-by: Sayooj K Karun <sayooj@aerlync.com>
We drop the packet if TTL or hop limit is 0, but we should
also unref the packet in this case because we return 0 to
the caller which is not then able to free the packet because
it thinks that the packet was sent properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The check_ip() in net_core.c did not check that the packet
Ethernet type is either IPv4 or IPv6. This meant that we for
example checked TTL also for ARP packets which is pointless as
those are not IPv4 packets.
Fix this by checking the link layer protocol type of the packet
to be either IPv4 or IPv6 before doing L3 checks.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allows to send with different timeouts to not block caller in some
situations. Stable API is kept and just calls `try`-variant with a timeout
of `K_FOREVER`.
Signed-off-by: Cla Mattia Galliard <cla-mattia.galliard@zuehlke.com>
Add a configuration option to skip the rx-queues for high priority packets
analogously to the tx-side.
Signed-off-by: Cla Mattia Galliard <cla-mattia.galliard@zuehlke.com>
To avoid starvation of a traffic class by another, limit the maximum amount
of packets, that can sit in a single traffic-class-fifo to a fraction of
the maximum amount of available packets. In the tx-case also reserve
packets for direct sending, in the case, where
CONFIG_NET_TC_SKIP_FOR_HIGH_PRIO is enabled.
Signed-off-by: Cla Mattia Galliard <cla-mattia.galliard@zuehlke.com>
This adds generic code that can be used by both IPv4 and IPv6
Path MTU Discovery mechanism. The actual PMTU support for each
protocol family is in subsequent commits.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
In case NET_NATIVE is disabled, certain network stack components do not
need to be compiled. Otherwise, they could throw errors if
--no-gc-sections compiler options is enabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If the packet was routed between interfaces by IPv6 module it should
not be looped back but has to be passed to the destination interface
instead.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
The autoconf module can now reuse generic address conflict detection,
which was added for all address types.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Do not depend on init level but start the socket service
already in net core init because DNS init code depends on
socket service API to be ready to serve. And we call DNS
init at the net core init.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow mDNS resolver and responder to to be used at the same
time so that both can use the port 5353. This requires
a DNS traffic dispatcher which affects also the normal DNS
resolver.
Fixes#72553
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
As discussed during DHCPv4 server integration, group DHCPv4 client files
with DHCPv4 server in a single lib directory.
Renamed internal "dhcpv4.h" header to "dhcpv4_internal.h" so that it's
not confused with the public "dhcpv4.h" header.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If we receive a packet from non localhost interface, then
drop it if either source or destination address is a localhost
address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
* Check IPv4 TTL or IPv6 hop limit and drop the packet if
the value is 0
* Check the IP addresses so that we do the loopback check
at runtime if the packet is destined to loopback interface.
* Update the statistics properly for dropped packets.
* Do not update sent packets if we drop packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Move the existing code verifying that the net_pkt was reassembled at IP
level to a helper function, as it will be needed in other places as
well. Additionally, add packet family check before accessing union
fields.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case packet is looped back to the stack, set LL address information
on the packet, using the LL address set on the corresponding network
interface, so that the information can be interpreted by the SOCK_DGRAM
packet socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This is preparation commit that moves the net shell code to
subsys/net/lib/shell directory. The following commits will
then refactor the code in net_shell.c to smaller and more
manageable pieces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add a DHCPv6 client implementation for Zephyr (RFC 8415).
The implementation allows to request IPv6 address and/or prefix from the
DHCPv6 server, and for now supports only the mandatory set of DHCPv6
options needed to achieve this. Currently the implementation supports
the following scenarios:
* Requesting new IPv6 address/prefix with Solicit/Request exchange
* Refreshing existing leases with Confirm, Renew or Rebind (depending
on the context).
For now, no Information Request (the case where neither IPv6 address or
prefix are requested) is supported. No support for Reconfigure was added
either, as this is optional (the client manifests clearly to the server
that it does not support Reconfigure). Support for these can be added
later if needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The init infrastructure, found in `init.h`, is currently used by:
- `SYS_INIT`: to call functions before `main`
- `DEVICE_*`: to initialize devices
They are all sorted according to an initialization level + a priority.
`SYS_INIT` calls are really orthogonal to devices, however, the required
function signature requires a `const struct device *dev` as a first
argument. The only reason for that is because the same init machinery is
used by devices, so we have something like:
```c
struct init_entry {
int (*init)(const struct device *dev);
/* only set by DEVICE_*, otherwise NULL */
const struct device *dev;
}
```
As a result, we end up with such weird/ugly pattern:
```c
static int my_init(const struct device *dev)
{
/* always NULL! add ARG_UNUSED to avoid compiler warning */
ARG_UNUSED(dev);
...
}
```
This is really a result of poor internals isolation. This patch proposes
a to make init entries more flexible so that they can accept sytem
initialization calls like this:
```c
static int my_init(void)
{
...
}
```
This is achieved using a union:
```c
union init_function {
/* for SYS_INIT, used when init_entry.dev == NULL */
int (*sys)(void);
/* for DEVICE*, used when init_entry.dev != NULL */
int (*dev)(const struct device *dev);
};
struct init_entry {
/* stores init function (either for SYS_INIT or DEVICE*)
union init_function init_fn;
/* stores device pointer for DEVICE*, NULL for SYS_INIT. Allows
* to know which union entry to call.
*/
const struct device *dev;
}
```
This solution **does not increase ROM usage**, and allows to offer clean
public APIs for both SYS_INIT and DEVICE*. Note that however, init
machinery keeps a coupling with devices.
**NOTE**: This is a breaking change! All `SYS_INIT` functions will need
to be converted to the new signature. See the script offered in the
following commit.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
init: convert SYS_INIT functions to the new signature
Conversion scripted using scripts/utils/migrate_sys_init.py.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
manifest: update projects for SYS_INIT changes
Update modules with updated SYS_INIT calls:
- hal_ti
- lvgl
- sof
- TraceRecorderSource
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: devicetree: devices: adjust test
Adjust test according to the recently introduced SYS_INIT
infrastructure.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: kernel: threads: adjust SYS_INIT call
Adjust to the new signature: int (*init_fn)(void);
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Adds support for incoming and outgoing IPv4 fragmented packet support,
allowing a single packet that is too large to be sent to be split up
and sent successfully.
Signed-off-by: Jamie McCrae <spam@helper3000.net>
The net_core:process_data() and connection:net_conn_input() methods are
the central network packet reception pipeline which:
1) guide network packets through all network layers,
2) decode, validate and filter packages along the way and
3) distribute packages to connections/sockets on all layers.
This code seems to have grown complex and rather cluttered over time as
all protocols, layers and socket implementations meet there in one single
place.
The code also reveals its origin as a pure IP stack which makes it hard
to introduce non-IP protocols and their supporting socket infrastructure
in a modularized way.
For an outside contributor it seems almost impossible to add another
protocol, protocol layer, filter rule or socket implementation without
breaking things.
This change doesn't try to solve all issues at once. It focuses
exclusively on aspects that maintain backwards compatibility:
* Improve modularization and encapsulation on implementation level by
disentangling code that mixes up layers, protocols and socket
implementations.
* Make IP just one protocol among others by removing assymmetry in
protocol handling logic and introduce preprocessor markup so that
IP-specific code can be eliminated by the preprocessor if not needed.
* Use preprocessor markup to delineate hook points for future
modularization or expansion without introducing structural changes (as
this would almost certainly break the API).
* Reduce cyclomatic complexity, use positive rather than negative logic,
improve variable naming, replace if/elseif/else blocks with switches,
reduce variable span, introduce inline comments where code does not
speak for itself, etc. as much as possible to make the code overall
more human-friendly.
Background: These are preparative steps for the introduction of IEEE
802.15.RAW sockets, DGRAM sockets and sockets bound to PAN IDs and device
addresses similar to what the Linux kernel does.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
While a previous change had already decoupled the IEEE 802.15.4 L2 from
IP upper layers, this only worked when at least one other interface of
the device supported IP.
This change removes this requirement and thereby fixes a build error
that occurred when disabling IP support while maintaining IEEE 802.15.4
L2 support.
Fixes: #48718
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
Datagram AF_PACKET sockets were not processed properly by the net stack.
Instead of receving a packet already processed L2, and thus with L2
header trimmed, it was receiving a raw, unprocessed packet.
Fix this by calling net_packet_socket_input() for the second time, after
L2 has processed the packet. An updated connection handler module will
forward the packet correctly based on the corresponding socket type and
packet L2 processing status.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This provides the infrastructure to create network packet filter rules
and to apply them to the RX and TX packet paths. Rules are made of
simple condition tests that can be linked together, creating a facility
similarly to the Linux iptables functionality.
A couple of generic and Ethernet-specific condition tests are also
provided.
Additional tests can be easily created on top of this.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Replace unpacked in6_addr structures with raw buffers in net_ipv6_hdr
struct, to prevent compiler warnings about unaligned access.
Remove __packed parameter from `struct net_6lo_context` since the
structure isn't really serialized.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace unpacked in_addr structures with raw buffers in net_ipv4_hdr
struct, to prevent compiler warnings about unaligned access.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The k_work handler cannot manipulate the used k_work. This means
that it is not easy to cleanup the net_pkt because it contains
k_work in it. Because of this, use k_fifo instead between
RX thread and network driver, and between application and TX
thread.
A echo-server/client run with IPv4 and UDP gave following
results:
Using k_work
------------
TX traffic class statistics:
TC Priority Sent pkts bytes time
[0] BK (1) 21922 5543071 103 us [0->41->26->34=101 us]
[1] BE (0) 0 0 -
RX traffic class statistics:
TC Priority Recv pkts bytes time
[0] BK (0) 0 0 -
[1] BE (0) 21925 6039151 97 us [0->21->16->37->20=94 us]
Using k_fifo
------------
TX traffic class statistics:
TC Priority Sent pkts bytes time
[0] BK (1) 15079 3811118 94 us [0->36->23->32=91 us]
[1] BE (0) 0 0 -
RX traffic class statistics:
TC Priority Recv pkts bytes time
[0] BK (1) 0 0 -
[1] BE (0) 15073 4150947 79 us [0->17->12->32->14=75 us]
So using k_fifo gives about 10% better performance with same workload.
Fixes#34690
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Set the default behaviour of the networking subsystem so that
no TX or RX threads are created. This will save RAM as there
is no need to allocate stack space for the RX/TX threads.
Also this will give small improvement to network packet latency
shown here:
* with 1 traffic class (1 TX and RX thread)
Avg TX net_pkt (42707) time 60 us [0->22->15->22=59 us]
Avg RX net_pkt (42697) time 36 us [0->10->3->12->7=32 us]
* with 0 traffic classes (no TX and RX threads)
Avg TX net_pkt (41608) time 42 us [0->21->20=41 us]
Avg RX net_pkt (41593) time 31 us [0->9->12->8=29 us]
In this qemu_x86 test run, 40k UDP packets was transferred between
echo-server and echo-client. In TX the speed increase was 30% and
in RX it was 14%.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create net_l2_send() function which will be called by each L2
sending function so that we can catch all the network packets
that are being sent. Some L2 layers send things a bit differently,
so in those cases call the net_capture_send() directly by the L2
layer.
Add network packet capture call in receive side after the pkt has
been received by the RX queue handler. This avoids calling the
net_capture_send() from ISR context.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With these changes, dial up Zephyr application/driver can use
socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW) for creating
a socket for sending/receiving data to/from ppp net link, i.e.
packet is going to/from PPP L2.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
This can be used to implement tunneling, VPN etc. The virtual
interfaces can be chained together to support multilayer
network interfaces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the network driver for some reason did not set the data in
the network packet properly, then just drop it as we cannot do
anything with just plain net_pkt.
Fixes#28131
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The current design of the network-specific stack dumping APIs
is fundamentally unsafe. You cannot properly dump stack data
without information which is only available in the thread object.
In addition, this infrastructure is unnecessary. There is already
a core shell command which dumps stack information for all
active threads.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Randomly generating ID the first time coap_next_id() is called is more
in accordance with CoAP recommendations (see
https://tools.ietf.org/html/draft-ietf-core-coap-18, section 4.4)
"It is strongly recommended that the initial value of the
variable (e.g., on startup) be randomized, in order to make successful
off-path attacks on the protocol less likely."
Doing this in a dedicated init function is the cleanest and most
idiomatic approach. This init function is not exposed publically which
means it will be called only once, by the network stack init procedure.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
If the loopback driver is enabled, then the packet might come
from localhost in which case mark it properly. Without this marking
the packet from/to 127.0.0.1 or ::1 would be dropped in later checks.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Provide access functions for manipulating network interface flags.
There is no need for the caller of this API to know about the inner
details of the flags.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
