Make scripts with an interpreter line executable so that they can be
invoked directly.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
JLink refuses new RTT telnet connections for a few moments after a socket
closes. This causes an issue when using `nc` as the telnet viewer, since
JLink would deny the connection. To resolve this, keep the "ping" socket
we use to determine if the RTT viewer is active connected, and use that
socket for RTT communication.
Signed-off-by: Daniel DeGrasse <ddegrasse@tenstorrent.com>
Add an argument `--esp-encrypt` to flash an ESP32 series chip with
encrypted flash.
The content of the binary is encrypted on the fly by the chip. It is
not required to know the encryption key. However, the fuses that
disable encrypted flash download must be kept enabled for this to work.
Signed-off-by: Martin Jäger <martin@libre.solar>
Mostly a revert of commit b1def7145f ("arch: deprecate `_current`").
This commit was part of PR #80716 whose initial purpose was about providing
an architecture specific optimization for _current. The actual deprecation
was sneaked in later on without proper discussion.
The Zephyr core always used _current before and that was fine. It is quite
prevalent as well and the alternative is proving rather verbose.
Furthermore, as a concept, the "current thread" is not something that is
necessarily architecture specific. Therefore the primary abstraction
should not carry the arch_ prefix.
Hence this revert.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
not force host variant if environment is setting something different in
the case of posix arch.
Fixes#83766
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Espressif branch of OpenOCD uses the version string "v0.12.0" instead
of "0.12.0" causing the version regex match to fail.
Add an optional 'v' prefix to avoid the failure.
Fixes: #83373
Signed-off-by: Eric Holmberg <eric.holmberg@northriversystems.co.nz>
Add a series of unit tests which try to cover somewhat systematically
the possible inputs and what we finally get at the exit
of the Binding constructor.
Running the assumption that any (valid) YAML binding file is
something we can make a Binding instance with:
- check which properties are defined at which level (binding,
child-binding, grandchild-binding, etc) and their specifications
once the binding is initialized
- check how including bindings are permitted to specialize
the specifications of inherited properties
- check the rules applied when overwriting a binding's description
or compatible string (at the binding, child-binding, etc, levels)
Some tests covering known issues are disabled by default:
- this permits to document these issues
- while not causing CI errors (when running the python-devicetree
unit tests)
- enabling these tests without causing errors should allow us
to consider the related issues are fixed
Signed-off-by: Christophe Dufaza <chris@openmarl.org>
Add runners entry to the module schema and import the file specified.
Every class that inherits from ZephyrBinaryRunner will be discovered and
added to runners list.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Added integration_toolchains to allow building/testing with multiple
toolchains available in the environment.
This changes the output structure and adds another level in the path
under twister_out signifying the toolchain used. The toolchain used
(variant) is also part of the json output now.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Since "JLink.exe" is also an executable distributed with JDK's, do an
explicit search on the standard SEGGER install directories for a JTAG
"JLink.exe" before falling back to whatever is first on PATH.
Fixes#51825.
Signed-off-by: Jordan Yates <jordan@embeint.com>
DIR is a POSIX type defined via the dirent.h header.
In Zephyr, we define it as `typedef void DIR`, since it is only
ever described via a pointer (much like `FILE`).
However, in checkpatch.pl, functions that return DIR* or accept
a DIR* argument are met with an error of the form below:
```
ERROR:SPACING: need consistent spacing around '*' (ctx:WxV)
```
Examples that trigger this false positive are, for example
```cpp
int dirfd(DIR *dirp);
DIR *fdopendir(int fd);
```
Include `DIR` as a class of specific POSIX types that should be
matched as types rather than other tokens.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
When looking at git author in a commit range using git log, explicitly
indicate we don't want to use the mailmap file (default git client
behavior is to use it), so that the "actual" author info from the commit
is used to perform the compliance check, and not whatever identity the
author may have mapped to in the mailmap file (ex. their "main" email
address might be different from the one they used to commit).
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The cleanup pass (336c7da) to address long lines accidentally
removed a needed comma in the jlink runner.
Fixes#83605
Signed-off-by: David Leach <david.leach@nxp.com>
Using `west patch` with the `--patch-base`, `--patch-yaml` or
`--west-workspace` option results in an unhandled AttributeError in
filter_args() because the function expects these args to be of type
path. Adding the type to the argument definition forces argparse to
create variables of type path.
Signed-off-by: Gerhard Jörges <joerges@metratec.com>
scripts/checkpatch.pl was written originally for the Linux kernel, and
its code reflects the kernel's coding style. In particular, it has
checks for unneeded braces around single-statement if/else/for/while
conditions. In Zephyr however, braces are always required, and so the
checks needed modifying to verify the opposite condition.
In order to enable the now-compatible checks, we also remove the
--ignore BRACES statement in .checkpatch.conf.
Limitations: the current code works well if there are not conditional
statements (e.g. #if, #ifdef or #endif) next to the if/else/for/while
conditions. This is rarely the case, but triggers with the Bluetooth
controller in code like this:
```
#if defined(CONFIG_BT_PERIPHERAL)
if (!lll->is_hdcd)
#endif /* CONFIG_BT_PERIPHERAL */
{
```
```
} else
#endif /* CONFIG_BT_CTLR_PRIVACY */
{
```
```
#if defined(CONFIG_BT_CTLR_DF_ADV_CTE_TX)
if (lll->cte_started) {
radio_switch_complete(phy_s, 0, phy_s, 0);
} else
#endif /* CONFIG_BT_CTLR_DF_ADV_CTE_TX */
{
```
```
#ifdef DUAL_BANK
while ((FLASH_STM32_REGS(dev)->SR1 & FLASH_SR_QW) ||
(FLASH_STM32_REGS(dev)->SR2 & FLASH_SR_QW))
#else
while (FLASH_STM32_REGS(dev)->SR1 & FLASH_SR_QW)
#endif
{
```
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add support for .cold and .coldrodata sections, used to implement
a cold module. Assigning code and read-only data to those sections
makes them suitable for use in a cold module, stored and executed in
slow memory.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Adds support for sysbuild loading snippets, these can be included
by using e.g.: cmake ... -DSB_SNIPPET=blah for sysbuild
directly or can be used with an application and sysbuild using
-DSNIPPET. Snippets for sysbuild can use SB_EXTRA_CONF_FILE in the
snippet file to specify an extra Kconfig fragment for sysbuild
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
In smaller projects and organizations, forking Zephyr is usually
a tenable solution for development continuity, in the case that
bug-fixes or enhancements need to be applied to Zephyr to
unblock development.
In larger organizations, perhaps in the absence of healthy patch
management, technical debt management, and open-source policies,
forking and in-tree changes can quickly get out of hand.
In other organizations, it may simply be preferable to have a
zero-forking / upstream-first policy.
Regardless of the reason, this change adds a `west patch`
command that enables users to manage patches locally in their
modules, under version control, with complete transparence.
The format of the YAML file (detailed in a previous comit)
includes fields for filename, checksum, author, email, dates,
along with pr and issue links. There are fields indicating
whether the patch is upstreamble or whether it has been merged
upstream already. There is a custom field that is not validated
and can be used for any purpose.
Workflows can be created to notify maintainers when a merged
patch may be discarded after a version or a commit bump.
In Zephyr modules, the file resides conventionally under
`zephyr/patches.yml`, and patch files reside under
`zephyr/patches/`.
Sample usage applying patches (the `-v` argument for additional
detail):
```shell
west -v patch apply
reading patch file zephyr/run-tests-with-rtt-console.patch
checking patch integrity... OK
patching zephyr... OK
reading patch file zephyr/twister-rtt-support.patch
checking patch integrity... OK
patching zephyr... OK
reading patch file zephyr/multiple_icntl.patch
checking patch integrity... OK
patching zephyr... OK
reading patch file zephyr/move-bss-to-end.patch
checking patch integrity... OK
patching zephyr... OK
4 patches applied successfully \o/
```
Cleaning previously applied patches
```shell
west patch clean
```
After manually corrupting a patch file (the `-r` option will
automatically roll-back all changes if one patch fails)
```shell
west -v patch apply -r
reading patch file zephyr/run-tests-with-rtt-console.patch
checking patch integrity... OK
patching zephyr... OK
reading patch file zephyr/twister-rtt-support.patch
checking patch integrity... OK
patching zephyr... OK
reading patch file zephyr/multiple_icntl.patch
checking patch integrity... OK
patching zephyr... OK
reading patch file zephyr/move-bss-to-end.patch
checking patch integrity... FAIL
ERROR: sha256 mismatch for zephyr/move-bss-to-end.patch:
expect: 00e42e5d89f68f8b07e355821cfcf492faa2f96b506bbe87a9b35a823fd719cb
actual: b9900e0c9472a0aaae975370b478bb26945c068497fa63ff409b21d677e5b89f
Cleaning zephyr
FATAL ERROR: failed to apply patch zephyr/move-bss-to-end.patch
```
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add UF2 Family ID for Raspberry Pi 2350 and build
UF2 image by default for Pico 2 board
Signed-off-by: Ryan Grachek <grachek@gmail.com>
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Instead of unconditionally erasing the whole target, add
support for using the common --erase flag.
Signed-off-by: Peter Johanson <peter@peterjohanson.com>
using "dt_node_prop_enabled" to filter out supported platforms
1. check node existing.
2. check prop in node.
3. check the prop is True.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
This reverts commit 9d849d92bf that seems to
be causing dozens of basic kernel test failures across various platforms.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The west packages extension can be used to install module dependencies.
Upstream nanopb has added the pip package dependencies to the
zephyr/module.yml file. Remove in-tree pip package dependencies.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The ecpprog command is an utility written by Greg Davill for flashing
FPGAs such as ECP5 or CrossLink-NX series. Devkits typically have an
FTDI interface chip to access the external flash. FPGA image is
typically at flash offset 0x00000000 flash offset, and the Zephyr
image offset can be set via CONFIG_FLASH_LOAD_OFFSET.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Add new '--start-address' argument to the STM32CubeProgrammer west runner.
This argument can be used to specify an address from which the MCU should
start executing, instead of relying on the default value in CubeProgrammer.
Also update STM32CubeProgrammer runner tests to support new argument.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Pass a test failure reason text from harness to the instance
to convey more details on the failure.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Set missing TestCase statuses when a test under the BinaryHandler failed
(crashed), so remaining 'STARTED' and 'NONE' are now 'BLOCK' instead.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
"west sign" uses the C preprocessor to generate a TOML configuration
file, needed for rimage. When creating LLEXTs rimage also uses a
configuration file where all supporting components are configured as
LLEXT. This adds such a file generation.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Add preprocessor function that returns 'y' if any enabled node with
compat does NOT have a certain property. This is different from using
dt_compat_any_has_prop to check that they ALL don't have the property.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Pretty print XML reports with tab identation on levels for better
readability and ease text diff there as well.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
The testcase.classname properties in `twister_report.xml` and
`twister_suite_report.xml` now contain the full testsuite name
(without its path prefix) instead of just two its dot-separated
leftmost components. This way `twister_report.xml` testsuite container
has no duplicate testcase elements with the same `classname` and `name`
properties executing with --no-detailed-test-id for a project with same
testcase names in its 'sibling' suites, for example`tests/kernel/sleep`.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Extend `--no-detailed-test-id` command line option: in addition to its
current behavior to exclude from a test Suite name its configuration path
prefix, also don't prefix each Ztest Case name with its Scenario name.
For example: 'kernel.common.timing' Scenario name, the same Suite name,
and 'sleep.usleep' test Case (where 'sleep' is its Ztest suite name
and 'usleep' is Ztest test name.
This way both TestSuite and TestCase names follow the same principle
having no parent object name prefix.
There is no information loss in Twister reports with this naming:
TestSuite is a container object for its TestCases, whereas TestSuite
has its configuration path as a property.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Milliseconds are logged as is, without leading zeros. This means that
following log content is produced, which is not aligned by columns:
12:54:27.972:INFO:root: Test message
12:54:27.992:INFO:root: Test message
12:54:28.12:INFO:root: Test message
12:54:28.32:INFO:root: Test message
12:54:28.52:INFO:root: Test message
12:54:28.73:INFO:root: Test message
12:54:28.93:INFO:root: Test message
12:54:28.113:INFO:root: Test message
12:54:28.133:INFO:root: Test message
Change milliseconds logging to include leading zeroes. This allows to print
nicely aligned log messages:
12:54:27.972:INFO:root: Test message
12:54:27.992:INFO:root: Test message
12:54:28.012:INFO:root: Test message
12:54:28.032:INFO:root: Test message
12:54:28.052:INFO:root: Test message
12:54:28.073:INFO:root: Test message
12:54:28.093:INFO:root: Test message
12:54:28.113:INFO:root: Test message
12:54:28.133:INFO:root: Test message
Additionally it is much easier to configure programs simplifying
timestamped log browsing (like in logview-mode for Emacs), as it is more
standard and does not require custom regex matching.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Pass additional args to test binary. Twister
passes it only for native_sim.
Fixes#82463
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
The weak syscall symbols generated by gen_syscalls.py are currently
compiled in the LLEXT subsystem library, which is then linked among all
other Zephyr libraries in an unspecified order. This can cause the weak
symbols to override the actual syscall implementations, leading to
undefined behaviour.
To fix this, the currently generated file is split in two elements:
- syscall_exports_llext.c contains the EXPORT_SYMBOL directives for all
syscalls. This part can be compiled with the LLEXT library and linked
among all other Zephyr libraries, and ensures all syscalls symbols
are preserved by the linker.
- syscall_weakdefs_llext.c contains the weak definitions for all syscalls.
This file is compiled in a separate library that is linked last, so
that the weak symbols are only used if no other implementation is
available.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
When loading a coredump with an an elf built using
'CONFIG_DEBUG_THREAD_INFO=y', gdbstubs assumes that the thread info
memoryblock populated by 'CONFIG_DEBUG_COREDUMP_MEMORY_DUMP_THREADS=y'
will be present in the coredump. This is not always true and causes an
error, and a failure to load the coredump. Add a default value for the
threads_metadata variable in CoredumpLogFile which can be used to detect
when the memory block is not present. This allows the coredump to load
successfully.
Signed-off-by: Félix Turgeon <felixturgeon@meta.com>
Use with statement to open stdout/stderr and resolve current warning
when running twister:
ResourceWarning: unclosed file....
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In case of unknown platforms in filters such as plaform_allow,
integration_plaforms or platform_exclude, report an error and exit.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add documentation for the get_filtered_output method in both the Python
implementation and the Integration with pytest chapter. The method is used
to filter command outputs by removing prompts and log messages, making it
easier to process shell command results.
Signed-off-by: Thomas Günther <thomas.guenther@limatica.com>
removed traling whitespace
in CI, we may need to quit if there is any failure
to save time, so add this --quit-on-failure so that
any failure will quit the test.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
This code had a growing "enumerate all the platforms" wart. In point
of fact only intel_adsp is special here. Other rimage platforms don't
have a bootloader and use zephyr.elf directly.
Don't hard code platform names (especially since they aren't the same
as board/soc names!). Just autodetect which scheme we have at
runtime.
Signed-off-by: Andy Ross <andyross@google.com>
Some linkers (e.g. the ARC MWDT one) don't recognize wildcards in file
names if they are not enclosed in quotes. Looks like the quotes have
no negative effect on the GNU ld linker, so just do it unconditionally.
Signed-off-by: Ilya Tagunov <Ilya.Tagunov@synopsys.com>
There is an incorrect logic that causes twister with
--device-testing to skip all tests on Windows. Correct
the logical condition.
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
bsim requires a special setup for it to be usuable and run by twister.
If this environment is not available, we should not error when the
platform is an integration platform.
Most developers and users of twister will not have the babblesim setup
and reporting errors is misleading and confusing. So if such env. is not
available, just filter as usual and do not error.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Support for space-separated lists was deprecated a long time ago
a91620f5bb so it is time to remove
support for them.
Any project that has not migrated can still use
`scripts/utils/twister_to_list.py` to automatically migrate twister
files.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
update test cases for twister
1. test_errors.py add protection.
2. test_handlers.py change call to status
3. test_testsuite.py change call to status
The log traces for TwisterException objects only.
And the stack trace output follow the same rules for all exceptions,
but StatusAttributeError with its dedicated handlers.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
The ruff linter and formatter should get a locked version to be installed
for compliance. This prevents new linter issues because of ruff updates
itself.
Ruff version 0.8.0 removed the deprecated UP027 rule so it's removed from
the ignore list.
Update the excludes file to match the actual reported issues.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
There's no need for the CODEOWNERS file anymore as figuring out
maintainership and performing reviewer assignment is done via the
MAINTAINERS file now
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
When a given board or SoC is extended, it has more than one directory
associated with it, where the build system can look for Kconfig files.
Make sure all of them are also included for Kconfig compliance checks.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
This is line is breaking in some CI setups since the recent ruff fixup
with:
ModuleNotFoundError: No module named 'domains'
Try and fixit by explicitly adding the path before the include, all
other instances have it already.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This reverts commit 26614832f2.
A bug in upstream nanopb, which this commit was pulling as part
of the submanifest update, seems to be causing test failures
on big-endian platforms.
Upstream bug: https://github.com/nanopb/nanopb/issues/1039
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This fixes ruff linting error UP007,
where one would use Optional or Union
instead of X | Y notation.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Fixes ruff linting errors UP030, UP031, UP032,
which make you use format specifiers (fstrings)
instead of printf formatting or str.format().
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes ruff linting error F541,
where an fstring is used when a normal
string would suffice.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes ruff linting error F811,
where a module is reimported or otherwise
redefined without being used.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes ruff linting error SIM115,
where files were opened without the use of
a context handler.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes ruff linting error SIM105,
where try-except-pass construct was used
instead of contextlib.suppress().
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes ruff linting error B023,
where function definitions use
loop variables incorrectly.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes ruff linting error B904,
where an error raised inside an except
clause does not specify from where it
should start.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes ruff linting error SIM102,
where multiple ifs were used instead
of combining them with and or similar
operators.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes ruff linting errors UP021 and UP022,
where obsolete subprocess parameters were
still used.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
this fixes ruff linting error UP006,
where old typing types are still used
instead of newer, PEP585-compliant ones.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes ruff linting error E741,
where a variable name is ambiguous
or hard to read (e.g. l).
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes ruff linting error SIM1101,
where a builtin, like any() or all()
has been reimplemented.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes ruff linting error SIM114,
where there are multiple arms in an
if-elif-else construct with the same result.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes ruff linting error SIM201,
where not is used instead of a more
appropriate comparison operator.
SIM202 exclusion was removed, as it
didn't apply to anything.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes ruff linting error SIM300,
where constant values are on the left
side of an expression.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes the ruff linting error SIM401,
where if-else construction is used instead
of dict.get().
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes errors E402 - module import
not at top of file.
One error in testplan.py left in,
as it is a part of a obscure 2020 fix
that would need to be re-tested.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
The west packages extension can be used to install module dependencies.
Upstream nanopb has added the pip package dependencies to the
zephyr/module.yml file. Remove in-tree pip package dependencies.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
#79174 incorectly interpreted the condition. If no simulator is found
if cannot be "renode" and therefore robot should be considered unsupported.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
In cases were west modules did not change, skip. This happens when
manifest layout changes, but without SHA changes.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
add vendor_allow and vendor_exclude to the list of filters. The vendor
data is maintained in the board.yml files.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The gperf tool automatically selects the optimal data type for the
asso_values table, depending on MAX_HASH_VALUE. However, there is
a corner case when the tables generated on different stages of the
build process have different data types, causing a link-time error.
Upgrade the data type for the table from unsigned char to unsigned
short to at least exclude this 8-bit to 16-bit transition. There is
another potential issue with the 16-bit to 32-bit transition, but
it seems not very likely to have 65k kernel objects anytime soon.
Signed-off-by: Ilya Tagunov <Ilya.Tagunov@synopsys.com>
Detect duplicate TestSuites on load, and raise error when it happens
with `--no-detailed-test-id` option which shortens TestSuite name
excluding the test project path prefix, thus increasing chances
for duplicates. Without this check, only the last duplicated
test configuration was selected while others silently ignored.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Fix duplicate test scenario error reporting to show paths to all
twister.yaml configuration files where these duplicates were found.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Instead of maintaining two lists, use the requirements file for
installing compliance dependencies.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Extend the device subsystem enumeration script to produce a CMake
pre-load script.
This allow CMake linker generator scripts to create iterable sections
based on output from device subsystem enumeration.
This ensures that same functionality is available in both ld linker
templates and the linker generator.
Update linker generators to support the use of the device subsystem
enumeration CMake pre-load script.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The device enumeration feature requires all devices
to place their API implementation in linker sections
by api type. This commit adds a script which uses
the tag __subsystem to identify all existing driver
API types and generate iterable sections for them.
The script is invoked from the top CMakeLists.txt
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
Co-authored-by: Pieter De Gendt <pieter.degendt@basalte.be>
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This commit adds a runner wrapper for the 'minichlink' program which
offers a free, open mechanism to use the CH-LinkE programming dongle for
the CH32V003.
https://github.com/cnlohr/ch32v003fun/tree/master/minichlink
Signed-off-by: Michael Hope <michaelh@juju.nz>
Signed-off-by: Dhiru Kholia <dhiru.kholia@gmail.com>
Commit e2a32d8b0ca596afeae48739c43817f693720a88 introduced an unbound
cmd issue for jlink flashing.
Fixed by moving cmd assignment outside of condition.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add a new west command as helper for package management of Zephyr
and modules.
The first package manager to get supported is pip, where west projects
can list individual packages or requirements files in their module file.
A convenience --install argument is added to install the packages instead.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This change introduces the ability in twister to select which
emulation/simulation tool to use on the command line.
If none is specified, it will select the first in the list.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
This simplifies the code and makes it clearer that both properties are
defined in terms of the Binding object matched to a given DT node.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
`_current` is now functionally equals to `arch_curr_thread()`, remove
its usage in-tree and deprecate it instead of removing it outright,
as it has been with us since forever.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The python subprocess call had a stdout=subprocess.PIPE parameter that
redirects standard output to a pipe, and a stderr=subprocess.STDOUT
parameter that redirected stderr to the pipe. This mixed JSON and
non-JSON output together, and issued an exception. Fixing with
stderr=subprocess.DEVNULL to ignore standard error and only keep the
JSON output.
Signed-off-by: Josuah Demangeon <me@josuah.net>
These ignores were added with an older version of pylint and are
either removed or ignored by default.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Fix Ztest test function name extraction from ELF symbols
for C++ compiled binaries where symbol names need additional
'demangling' to match with corresponding test names.
The `c++filt` utility (part of binutils) is called for
demangling when it is needed.
Twister test suite extension and adjustment.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Fix a problem of Ztest suite names not taken into account by Twister
to identify a TestCase, so in some situations a Ztest test's status
was not assigned to the proper TestCase and it remains 'None'
whereas the actual status value lost, eventually the resulting total
execution counters not correct.
The issue was observed in these situations:
* Ztest application with multiple test suites having same test names.
* Ztest suite is 'skipped' entirely on execution with all its tests.
The proposed solution extends Twister test case name for Ztest to
include Ztest suite name, so the resulting identifier looks like:
`<test_scenario_name>.<ztest_suite_name>.<ztest_name>`
The above naming scheme now requires ztest_suite_name part to be
provided for `--sub-test` command line option.
Testcase identifiers in twister.json and testplan.json will also
include ztest_suite_name component.
The Twister Ztest(Test) Harness is improved to track all state changes
known from the test application's log for Ztest suites and test cases,
so now it parses log output from a Ztest application more scurpulously.
Regular expressions to match log records are extended and optimized
to compile them only once and, in some cases, fixed (suite summary).
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Extended hardware map to share a single board between variants.
To run tests for different variants on the same board
without re-configuring the hardware map file for each variant,
one can use a `platform` atribute as a list of names.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Previously, rtt start would always fail because the target
(i.e. firmware) had not been started.
```
Info : rtt: Searching for control block 'SEGGER RTT'
Info : rtt: No control block found
```
When the command is 'rtt', run the binary via gdb before calling
'rtt start'. Firmware calls `SEGGER_RTT_Init()` shortly after
init which allows OpenOCD to find the RTT control block.
Similarly, only start the 'rtt server' after calling
'rtt start' to avoid any potential race conditions
internally within OpenOCD.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Previously, there was a warning that the to_num() method can
(and probably should) be unbound from OpenOcdBinaryRunner.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Similar to how print_gdbserver_message() prints GDB server info
when "west debug" is run, print RTT server info when "west rtt"
is run.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add support for the rtt target so that users can run
`west build -p auto -b <board> -t rtt <app>`
similarly to the way that users can now do so with the debug
target, since the rtt target is supposed to be used in a similar
way.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
This is generating lots of duplication and unnecessary builds when
multiple arches are being changed. Let's stick to basic coverage which
should be enough for PRs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a compliance test using ruff, for both linting and formatting of
newly added python files.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add simple scripts to convert ruff check and ruff format output to
toml exclude sections.
These sections can be used to ignore baseline violations for an existing
codebase.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Reporting or annotating issues can be done on a range rather than a
single line.
Add support for end line and end column.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Moves several node-specific operations inside the Node class to improve
its encapsulation, remove a monkey patch and access to internal methods
and fields.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Netcat (nc) does not handle SIGINT. It silently ignores it.
We cannot use run_client(), given that the pydoc for
run_client() specifically contains "Run a client that
handles SIGINT".
Instead, use check_call(), which correctly handles Ctrl+C.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
LinkServer manages port numbers for gdb and semihost as separate linear
sequences when invoked to debug multi-core applications, e.g the
gdb-server instance for cpu0 will have the default GDB port 3333 and the
next gdb-server instance will be assigned the port 3334. The latter will
conflict with the default port for semihost which is 3334.
This patch changes the default port for semihost to 8888.
Port numbers can be changed when invoking the linkserver runner.
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
To support checking for sorted blocks of multi-line text add
an optional regex pattern for the KeepSorted compliance check.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The production version of the nRF54H20 SoC is now available, so remove
the initial Engineering B (EngB) preview version.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Some auto formatters will wrap long lines of code and insert newlines
that are part of function decls outside of arguments. This change strips
out all newlines so syscall typename regex function as expected.
Signed-off-by: Mark Inderhees <markind@meta.com>
This patch adds support for the size_t %z format specifier to the
dictionary parser.
It's the correct format to use for size_t types in modern C,
but it's not supported in python directly.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
Fix wrong reporting about where testcases were executed.
We have:
INFO - 1130 of 1130 executed test cases passed (100.00%) on 0 out of
total 860 platforms (0.00%).
which is obviously wrong.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
