USB remote wakeup capability is a common feature of keyboards,
allowing them to wake up a suspended host. Currently there is no USB sample
that demonstrates remote wakeup, which makes basic evaluation of the
functionality non-trivial.
Modify the hid-keyboard sample with a minimalistic solution
of demonstrating remote wakeup capability. While it is not required to have
been configured prior to suspend to issue a wakeup request, from usability
perspective I'd say it makes sense.
Signed-off-by: Benedek Kupper <kupper.benedek@gmail.com>
remove the FATAL_ERROR message, and leave it just as a message.
also enhance filter for this case with "1pc0" anmd "1pc1"
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
ESP32xx appcpu board should only be built with procpu.
Stand alone AMP support makes no sense.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
For many devices iSerialNumber is not required. The only device class
currently supported in Zephyr that requires iSerialNumber is MSC. If the
serial number is not available then iSerialNumber must be 0. Failure to
read the string descriptor for non-zero iSerialNumber fails USB Command
Verifier Chapter 9 tests.
When USBD_DESC_SERIAL_NUMBER_DEFINE() was used without CONFIG_HWINFO
then it did lead to runtime failure when requesting the string (thus
failing certification).
Fail USBD_DESC_SERIAL_NUMBER_DEFINE() at build-time if CONFIG_HWINFO is
not set to prevent the surprise at runtime. Only define serial number
descriptors if CONFIG_HWINFO is enabled.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
openamp_rsc_table will run on the i.MX95 M7 core and can communicate
to the A55 that runs linux-imx.
Signed-off-by: Andre Heinemans <andre.heinemans@nxp.com>
TLS_CREDENTIAL_SERVER_CERTIFICATE credential type is misleading, as in
fact it just represents a public certificate, it does not matter if the
certificate belongs to a server or a client. And actually, it was
already used in-tree for clients as well, for example in LwM2M.
Therefore rename the credential type to a more generic
TLS_CREDENTIAL_PUBLIC_CERTIFICATE and deprecate the old one.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
hw_wdt_dev may not be NULL and the device not be ready to be used.
If that is the case we explicitely initialize task_wdt_init with
NULL and do not use hw watchdog.
Signed-off-by: Flavio Ceolin <flavio@hubblenetwork.com>
- adds the ability to change the NVS sample "Maximum reboot counter",
"Reboot countdown" and its "Sleep time" parameters via Kconfig,
without manually modifying the source code.
- reduces the default number of resets to 5 (was 400).
- adds the ability to reduce flash memory wear on real devices
by reducing the number of write iterations.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Added tests in order to verify the functionality of the
newly added fatfs fstab integration.
Signed-off-by: Carlo Kirchmeier <carlo.kirchmeier@zuehlke.com>
Co-authored-by: Carlo Kirchmeier <carlo.kirchmeier@zuehlke.com>
Co-authored-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The Adafruit Feather ESP32S3 is a development board in the Feather
standard layout, sharing peripheral placement with other devices labeled
as Feathers or FeatherWings. The board is equipped with an ESP32-S3 mini
module, a lithium ion battery charger and a USB-C connector. Compared to
the base model, this TFT variant additionally comes with a 240x135 pixel
IPS TFT color display.
Signed-off-by: Leon Rinkel <leon@rinkel.me>
Rework the sample to use the new USB device stack and the new DAP
backend and align the sample with the WebUSB sample which has a similar
BOS descriptor.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Rename the driver from uart_native_posix to uart_native_pty.
Including renaming the DTS compatible, and kconfig options, deprecating
the old ones.
And refactor the driver, generalizing it, so we can have any number of
instances.
Note that, unfortunately generalizing to N instances cannot be done
without a degree of backwards compatibility breakage: This driver was
born with all its configuration and selection of the instances based on
kconfig.
When the driver was made to use DT, it was done in a way that required
both DT and kconfig needing to manually coherently enable the 2nd UART.
This has now been fixed, which it means only DT is used to decide how
many instances are avaliable, and UART_NATIVE_POSIX_PORT_1_ENABLE is
just ignored.
Including:
* Deprecate UART_NATIVE_WAIT_PTS_READY_ENABLE: the options is always on
now as it has no practical drawbacks.
* Deprecate UART_NATIVE_POSIX_PORT_1_ENABLE: DTS intanciation defines it
being available now.
* Rename a few functions and in general shorten pseudo-tty/pseudo-
terminal to PTY instead of PTTY.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Almost all overlays only enable NVS and SETTINGS_NVS, something that
should be enabled in sample directly. Remove all overlays and make the
sample more genenric.
Use filter on storage partition to enable testing the sample on more
plaforms.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board does not have Flash support enabled yet.
Re-enable this sample once Flash and MCUboot support is
added.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
include the use of callback registration to handle descriptor
whenever `FragSessionSetupReq` is sent from fuota server.
Signed-off-by: Kiara Navarro <sophiekovalevsky@fedoraproject.org>
native_posix has been removed from the tree. So there is no
need to support it anymore in this sample code.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is being removed as it has reached its end of life in 4.2,
after being deprecated since 4.0.
So these overlays will not serve any purpose anymore.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is being removed as it has reached its end of life in 4.2,
after being deprecated since 4.0.
So these overlays will not serve any purpose anymore.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is being removed as it has reached its end of life in 4.2,
after being deprecated since 4.0.
So these overlays will not serve any purpose anymore.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is being removed as it has reached its end of life in 4.2,
after being deprecated since 4.0.
Remove the twister support for native_posix[//64] and therefore all
references to them from the testcases and samples yamls, so twister
does not error out.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The UAC2 samples do not work with Windows UAC2 driver because:
* driver does not support implicit feedback
* driver expects wMaxPacketSize equal 4 on Full-Speed device
The only correct place to solve these issues is the Windows UAC2 driver.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
- fix unwanted "Error: Something went wrong at iteration 0".
- the loop_cnt check has no sense for iteration 0,
comparing with wrong -1.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Add a console harness to check that the example has
started successfully.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
We need to track the self-powered status of the device independently of
the D6 bit in the bmAttributes value of the configuration descriptor
because the Get Status request about the self-powered status is valid in
address state and we support multiple configurations.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
- adds ability to change the ZMS sample MAX_ITERATIONS
and DELETE_ITERATION parameters via Kconfig without manually
modifying the source code.
- adds ability to reduce flash memory wear on real devices
by reducing the number of write iterations.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
native_posix is deprecated and will be removed in 4.2
Run this sample in native_sim instead.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This sample could not run on any target as it depedend on zms
which is set by no board.
But it seems to run just fine in both allowed platforms,
so let's add a trivial twister check (so it actually passes instead
of waiting for ever), and remove that `depends on`.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is deprecated and will be removed in 4.2
Run this sample in native_sim instead.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
As part of cleaning up usage of non-inclusive language in-tree,
I spotted an obsolete mention to a udev rule that ModemManager doesn't
use anymore. Drop it.
See commit 9639e52726854782508e35a75c6abf874bd9e608 in ModemManager
repo.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Allow user to add shell commands in testcase/sample yaml file
alongside the harness_config like in the console harness.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
This commit adds support for these multicore samples:
- samples/drivers/mbox
- samples/drivers/mbox_data
- samples/subsys/ipc/ipc_service/static_vrings
- samples/subsys/ipc/openamp
Signed-off-by: Tomas Galbicka <tomas.galbicka@nxp.com>
In some cases, CPUs that may need to reset or
temporary stop communication. This commit adds "unbound"
functionality that provides a callback to IPC service user
when connection was interrupted for some reason, e.g.
expected or unexpected CPU reset, closing the
endpoint. The "unbound" callback is optional to implement
by endpoints. This commit implements it in the ICMsg
backend.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
The shell harness expects the UART can be routed to stdin/out on POSIX
arch based targets, but this is not the case for the bsim targets (at
least not yet, and not using the native_posix UART configuration option)
This causes these tests to fail timing out in CI => let's filter these
platforms by now.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This shield is compatible with all XIAO boards. Tested with 2 of them:
* xiao_ble
* xiao_esp32s3
Extend sample.yaml for integration testing with both, so there is coverage
across two very distinct SoC vendors and architectures.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Move 'tags' and 'modules' into common section in samples.yaml, so test
definitions are deduplicated a bit.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
