- Add bus support for SPI (based on RTIO).
- Support read/decode API for one-shot reads on the following channels:
- SENSOR_CHAN_POS_DX.
- SENSOR_CHAN_POS_DY.
- SENSOR_CHAN_POS_DXYZ.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
This Introduces a driver for the i2c interface of Phosense XBR818.
XBR818 is a 10.525Ghz Radar chip with builtin detection algorithm.
Signed-off-by: Camille BAUD <mail@massdriver.space>
This commit introduces a new Sensor Clock API, enabling the retrieval
of cycle counts and conversion to nanoseconds based on the system or
external clock. The API includes:
- `sensor_clock_get_cycles()` to get the current cycle count from the
sensor clock.
- `sensor_clock_cycles_to_ns()` to convert cycles to nanoseconds using
the clock's frequency.
The implementation supports both system clocks and external clocks
defined in the device tree, making the sensor clock integration more
flexible for various sensor use cases.
Signed-off-by: Mark Chen <mark.chen@cienet.com>
Moves all Renesas sensor drivers into a vendor specific subdirectory
matching the organization used for other drivers.
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
Refactors the cmake and kconfig bits of the tdk sensor drivers into the
vendor subdirectory to make them consistent with other vendor-sorted
sensor drivers. The tdk driver implementations were previously moved
into the vendor subdirectory in commit
41f1c3a2b7.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Add all the necessary files to add apds9253 Avago sensor driver.
Sensor available at https://docs.broadcom.com/doc/APDS-9253-001-DS
Signed-off-by: Margherita Milani <margherita.milani@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
This transforms the existing driver for the Microchip MCP9808
to be used as a generic driver to be used with all
JEDEC JC 42.4 compliant temperature sensor chips.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
In order to decouple the read request from its implementation, we need
to be able to yield to potential lower-priority threads, which is not
possible with k_yield() itself. As such, using RTIO Consume semaphore
enables us to achieve this.
This patch also refactors blocking API (sensor_read) to also block upon
consumption, so as not to require RTIO_SUBMIT_SEM enabled.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Add driver for Festo VEAA-X-3 series proportional pressure regulator.
The driver assumes that the maximum ADC value matches the maximum
output from the device, and that the maximum DAC value matches the
maximum input value for the device. External hardware is probably
required between the ADC/DAC and the device.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Add driver for TSic 206/306/316/506F/516/716 temperature sensor.
The driver uses PWM capture driver to read a single wire with
Manchester-like encoding.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Based on the iis2dlpc driver, with some significant differences in
interrupt handling.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
The DHT20 sensor is a temperature and humidity sensor that uses I2C to
communicate with a microcontroller. The DHT20 sensor is Aosong.
use standard crc
update description to add reference to AHT20 and AM2301B
clean code, use defines and bit manipulation
add dht20 to i2c test suite for build tests
update bit manipulation
use more defines instead of raw numbers
add bindings to allow aht20 or am2301b to be used in devicetree
in all 3 cases, the same dht20.c driver is compiled
Signed-off-by: Nathan Olff <nathan@kickmaker.net>
Add driver for Angst+Pfister O2 sensors FCX-MLD25 & FCX-MLD95 and maybe
more. Tested with FCX-MLD25.
Supports get O2 value, get status, and power management.
Note that in suspended power mode heating output is at 20 %, thus
probably not suited for a battery powered device.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
The STTS22H is an ultralow-power, high-accuracy, digital temperature
sensor offering high performance over the entire operating temperature
range. This driver is based on stmemsc HAL i/f v2.3
https://www.st.com/resource/en/datasheet/stts22h.pdf
Signed-off-by: Armando Visconti <armando.visconti@st.com>
