Drivers update to use shared interrupt allocator for Xtensa
and RISCV devices.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Implement the '.reset' interface in the nrfx-timer driver
to allow the upper layers to use the counter_reset
function.
Signed-off-by: James Roy <rruuaanng@outlook.com>
Implement the '.reset' interface in the native-posix driver
to allow the upper layers to use the counter_reset
function.
Signed-off-by: James Roy <rruuaanng@outlook.com>
Remove deprecated nxp,kinetis-lptmr compatible string
which is superseded by nxp,lptmr compatible due to
removing family specific name.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
clean up usage of select USE_STM32_LL_RCC, USE_STM32_LL_EXTI
and USE_STM32_LL_PWR from Kconfig.stm32
this modifications due to the include unconditionally of
stm32xxxx_ll_rcc.h, stm32xxxx_ll_exti.h and
stm32xxxx_ll_pwr.h in the HAL.
Signed-off-by: Khaoula Bidani <khaoula.bidani-ext@st.com>
Including renaming the DTS binding and kconfig options
deprecating the old one.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Move macro from nrf_clock_control.h to soc_nrf_common.h. Clock control
header fetches many dependencies (e.g. onoff.h) so move macro to more
low level header.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Since the RA2L1 uses the macro "ICU_EVENT" instead of
"ELC_EVENT" (which is currently used) to input into
the IELSR register, the ek_ra2l1 board cannot assign
any interrupts for any driver.
This commit aim to correct the Event macro to input correct
value for IELSR register on all the Renesas SoC by using
"BSP_PRV_IELS_ENUM" macro.
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
The Atmel sam4l have generic clock 5 enabled at 1024Hz. Update sam4l
sam_tc_input_freq_table index 0 to reflect right value.
signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The current code is enabling the IRQ before calling the GPT_Init()
function which (beside being incorrect by design) opens the door to a
spurious irq to cause the isr function call before the init. This
corner case can be easily observed for example when running the code
inside a hypervisor/jailhouse where restarting the cell without
previous proper exit (device deinit) can cause a crash (null pointer
dereference) when an IRQ is triggered before the init.
Signed-off-by: Aziz Sellami <aziz.sellami@nxp.com>
The current code is enabling the IRQ before calling the TPM_Init()
function which (beside being incorrect by design) opens the door to a
spurious irq to cause the isr function call before the init. This
corner case can be easily observed for example when running the code
inside a hypervisor/jailhouse where restarting the cell without
previous proper exit (device deinit) can cause a crash (null pointer
dereference) when an IRQ is triggered before the init.
Signed-off-by: Marouen Ghodhbane <marouen.ghodhbane@nxp.com>
Changes introduced in 293b9a16ca didn't
verify correct behaviour when running `TIMER1` with `TIMER0` is paused,
and was reporting the wrong tick counter being incremented. Correct this
and extend the testing to verify correct behaviour.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Refactor and merge the SoC support files for the Atmel SAM E70 and SAM V71
product series. These SoCs are part of a larger product family (SAM
E70/S70/V70/V71) and share a common set of peripherals.
Support for the two remaining product series (SAM S70/V70) is not part of
this refactoring as these will require further additions to the Atmel HAL.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
This commit adds support for the STM32WB0 series to
the existing STM32 timer-based counters driver.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
The Atmel SAM0 SoC enable peripherals clocks in distinct places: PM and
MCLK. The old devices had defined the peripheral clock enable bit at PM.
On the newer devices this was extracted on a dedicated memory section
called Master Clock (MCLK). This change excludes the dedicated bindings
in favor of a generic approach that cover all cases.
Now the clocks properties is complemented by the atmel,assigned-clocks
property. It gives the liberty to user to customize the clock source
from a generic clock or configure the direct connections.
All peripherals drivers were reworked with the newer solution.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add requesting for global HFSLL when fast instance TIMER (e.g.
TIMER120 in nrf54h20) is used.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The Atmel counter driver requires a valid pinctrl list to initialize.
This relax this condition since the timer can be used as general purpose
timer, which may not require a pin associated with the timer unit.
Fixes#83509
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The RP2350 SoC series contain two timer peripherals. Extend the driver
to support using the second timer (`TIMER1`).
N.b. this requires a fix from the Pico SDK to be patched into
hal_rpi_pico. See https://github.com/raspberrypi/pico-sdk/pull/1949 .
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Use shell_device_get_binding() instead of device_get_binding() so that
we get the device based on its name and in addition by its label.
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
allows use of touch_sensor, rtc_counter, and wdt simultaneously by enabling
ESP_INTR_FLAG_SHARED when calling esp_intr_alloc()
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
The hal_nordic revision was updated to bring in NRFX v3.8.0.
Aligned the uses of single-instance API to use multi-instance instead.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Common RTC counter driver for MAX32xxx MCUs.
Time of day alarm is used to generate interrupt.
The resolution of time of day interrupt is 1Hz.
Subsecond alarm interrupt not works it does not meet
zephyr counter driver requirement, so that not used.
To use as wakeup source wakeup-source parameter shall be
defined as below
&rtc_counter {
status = "okay";
wakeup-source;
};
Co-authored-by: Okan Sahin <okan.sahin@analog.com>
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
This commit should deal with fixing unbalanced policy state locks.
When PM and PM_DEVICE are declared, default state, policy locks
should be given only when active.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
This Kconfig has wrongly been added to defconfig files. It is not the
right place for it. It has never been the right place for it. Drivers
that need it should select the symbol in their Kconfig entries. Drop
PINCTL from Kconfig.defconfig and add proper select at Kconfig.sam*.
Fixes#78619
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
- Modify the macro in source code AGT to get the right data from
device tree
- Modify name of agt node
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Include value of 30 us as not valid to set alarm for RTC counter.
Change included to allow RTC timer to be properly set to use
RC_FAST_D256 as clock source.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Add OS timer implementation making use of the Sleeptimer HAL.
Sleeptimer integrates tightly with the Silabs Power Manager HAL,
and must be used as the OS timer to achieve optimal power consumption
when using the radio.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
- boards: renesas: Add support for agt.
- drivers: counter: Add support for counter driver use agt
- dts: arm: Add support for agt.
- dts: bindings: Add support for agt counter driver.
- soc: renesas: Add support for agt counter driver.
- samples: drivers: counter: alarm: Add support for RA8
This is initial support with only basic functionality for counter
operation on Zephyr using AGT hardware, current support for
count source is limited to LOCO and PCLKB, other count source
like underflow signal external pin or AGTIO from another AGT
channel will be added in later support
Signed-off-by: Ha Nguyen <ha.nguyen.fz@bp.renesas.com>
Signed-off-by: Thao Luong <thao.luong.uw@renesas.com>
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Force capture call so that timer counter value is updated
accordingly.
This also adds get_value_64 counter API function.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Make sure to stop timer counter before interrupt is cleared,
otherwise it might re-trigger it due to default interrupt level mode.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
When building with native_sim, We need to specify
```
#define _POSIX_C_SOURCE 200809L
```
to make `gmtime_r` available.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Add timer device name autocompletion to the commands.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
These callback functions are not used outside of the file, make
them `static`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Common counter driver based on timer for MAX32xxx MCUs
To use as wakeup source wakeup-source parameter shall be
defined as below
&lptimer0 {
status = "okay";
clock-source = <ADI_MAX32_PRPH_CLK_SRC_ERTCO>;
wakeup-source;
counter {
status = "okay";
};
};
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
