From the response of read_local_supported_feaatures check if local
device supports eSCO packet type and update it to bt_dev.
Also added sco field in bt_dev
Change-Id: If85b3d24d327a6243318fad89a07375a8253f89b
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
This patch includes handling AG network error i.e +CME ERROR and
report the error number.
Change-Id: I19a3158e44568ad0ad21fb0dd790ac2f554c0625
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
This allows to queue buffer to sent later in case it runs out of
credits so it no longer blocks the caller thread.
Jira: ZEP-1776
Change-Id: Ifa9b412f98889b50c0b889655d910520d11a4718
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This moves necessary functions that will be needed for queuing packets
while waiting for more credits.
Jira: ZEP-1776
Change-Id: I030c696d432ec5be1b8e6b649e953da145929777
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The 100ms limit is only valid for controllers before version 5.0. For
a 5.0 controller the minimum is 20ms (0x00a0) which is already checked
for later in the valid_adv_param() function.
Change-Id: I0566a38ff855800d2e46e1d2c0a5c7bc9bc610cd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for detecting version 5.0, i.e. 0x09.
Change-Id: Ia2da513b65c420142fe97a4fa173bfa8045e9d75
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Filters the service records by going through all the records and
removes the one which does not have the uuid. So finally, only
the records which has all the uuids in the service search pattern
will be present in matching recs.
Change-Id: I1daa7c1b645efae2af66962999cc4c541891eff7
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
bt_gatt_get_mtu can be useful when GATT is used to transport another
protocol on top.
Change-Id: I328ef49138ccc4ce642b0019d08060f6022d5aa7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Handles the service search request from peer, parses the service
search pattern (which is a data elem seq of uuids to be searched)
and populate the uuids.
This also populates the registered records which will be filtered
based on the uuids in the pattern (which will be done in the subsequent
patch).
Change-Id: I9a232a7cfdd159325214ed13e98cc20be39a2e3b
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This is mainly done to avoid VLAs for looking up the service to handle
service search requests so that we can make sure that RX stack size
is sufficient for the defined no of services.
Change-Id: Ia99072615d9094a35bd7605ed2901e8018c0ecb2
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Instead of returning -EINVAL at runtime assert in case of invalid
parameters.
Change-Id: I40505f06a4c12445bfb1f1846ace1b592b6bc342
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Separate out data element structure header into type and size fields
Change-Id: I869ee1ea82db1f6d669bb905055135b7d63f3fa2
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
L2CAP TX and RX MTUs will be exchanged during configuration req/rsp.
It should not be modified after connection.
Change-Id: I1e291c9e093561f349bcdcbb75cd7ff22b4163a5
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Added an API to allow addition of stream end points by the application.
Change-Id: I91b95fc5dc3b9b2950e8d55b5846e460e55f2453
Signed-off-by: Piyush Itankar <piyush.t.itankar@intel.com>
This fix not removing subscription if it was first element on the list.
In that case prev was NULL resulting in passing garbage node to
sys_slist_remove.
Change-Id: I9452af08409692f9a331afd514fbac8cc727d289
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This fix legacy pairing with passkey entry model when passkey
is fisr entered on local side. Replying with error in that case
is bogus as we should just wait for remote confirm.
Change-Id: I75480802928fd29d21617aa9250f90df647eb9a2
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
List container changes apparently were merged in the wrong order causing
leaving it with a compilation error.
Change-Id: Ib9d9502ddb39330c262e495a33592d0340713d83
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the TX thread is not in k_poll() when conn->state gets set to
DISCONNECTED and a dummy buffer is pushed to conn->tx_queue the
bt_conn_prepare_events() function would have failed to add the
connection to the poll list for cleanup. To ensure the cleanup always
happens introduce a new flag that indicates that a cleanup must
happen. The extra benefit of the flag is that we no-longer need a
dummy buffer, but can simply use the conn_change signal to wake up the
TX thread.
Change-Id: I369584d305261ab3666b931c786daff9d131d228
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
From k_poll_signal_init() documentation:
The poll signal contains a 'signaled' field that, when set by
k_poll_signal(), stays set until the user sets it back to 0. It thus
has to be reset by the user before being passed again to k_poll() or
k_poll() will consider it being signaled, and will return immediately.
Change-Id: I55daac92dd6293ac653fd7fa0f907b0b7fd99d65
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
When iterating to the subscriptions to be removed the code has to keep
a reference to the previous node but it case the subscription matches but
doesn't need to be removed it doesn't update the prev node which may
corrupt the list in case the next node end up being removed.
Change-Id: Ic5448f01bf78d293f93b9a7078a0147385ea1d23
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If subcription was found within the subscription list,
we have check if remains identical subscription
from the next node.
Otherwise none unsubscription is realized.
Change-Id: I38132d7c80575801885b8057902f3d4666b08aea
Signed-off-by: Jonathan Gelie <jonathanx.gelie@intel.com>
If the buffer given to hci_cmd_done() is not from the command buffer
then using the cmd(buf) macro is not valid. Simply bail out from
hci_cmd_done() if this is an event that didn't have a matching command
buffer.
Change-Id: Id8357a23a307f4ef3a9214a4e1f7d853a18cb907
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It is not used outside of sdp.c and has no declaration.
Change-Id: I420a6b98d1b46fedffa29d042267b9c606d04c46
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
'buf' variable of type struct net_buf was one of the arguments for
finish callback in response to each AT command sent. 'buf' variable
not used in that function. So removed 'buf' variables from the argument
list.
Change-Id: I7d6aa6082f524012ae13a04426915076130ddf69
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Subscribe value is set to zero before calling notify callback,
to distinguish a subscription failure from an unsubscription
on disconnection (when flag BT_GATT_SUBSCRIBE_FLAG_VOLATILE is set).
Change-Id: Ia91220492d82041b2c385bf88a15180387e7a483
Signed-off-by: Jonathan Gelie <jonathanx.gelie@intel.com>
If found error during service level connection disconnect rfcomm.
Change-Id: Ida425375975b8d60ab1024d07a8ffe7745ae0b54
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Some application protocol required non-persistente subscription
across connection even in bonded case.
Flag BT_GATT_SUBSCRIBE_FLAG_VOLATILE specify if subscription
must be remove during disonnection.
Change-Id: I1bc2bbbb4bc86f58905e44a7eb267ca0871f2fdb
Signed-off-by: Jonathan Gelie <jonathanx.gelie@intel.com>
The subscriptions callback may free or reuse the subscription so all
instances that where this could happen need to safely fetch the next
element which is why this changes switch to use sys_list_t as it has
SYS_SLIST_FOR_EACH_NODE_SAFE.
Change-Id: I37d51f27116ea0c057b560924a9416676477597b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Once the service level connection is done call the connected
callback.
Change-Id: I7541e221d4c03c939682ec70f1d9c093f87ceb09
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
We can go further with taking advantage of k_poll and merge the
connection TX thread together with the HCI command thread, thereby
saving even more memory.
Change-Id: I1792056fd4621d62c7cd05929094033acca45c74
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that the k_poll API is available we can use it to have single
connection TX thread instead of multiple ones, which helps reduce the
per-connection memory overhead by a substantial amount.
Change-Id: Icb5d4da87cf0d660bba8da43186d1e76f41c825a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Removing the module specific buffer pool. If future, use common acl_tx_pool.
Change-Id: Ie1452f981ef43642715be395315845cc2d9bb285
Signed-off-by: Arun Jagadish <arun.jagadish@intel.com>
