This test is intended to validate k_pipe_alloc_init()
and k_pipe_cleanup(), when CONFIG_USERSPACE is not defined.
Also added test to validate pending reader and pending writer
feature in pipe.
Signed-off-by: Ajay Kishore <ajay.kishore@intel.com>
With the new Kconfig preprocessor (described in
https://github.com/torvalds/linux/blob/master/Documentation/kbuild/
kconfig-macro-language.txt), the syntax for expanding environment
variables is $(FOO) rather than $FOO.
$(FOO) is a general preprocessor variable expansion, which falls back to
environment variables if the variable isn't set (like in Make). It can
also be used in prompts, 'comment's, etc.
The old syntax will probably be supported forever in Kconfiglib for
backwards compatibility, but might as well make it consistent now that
people might start using the preprocessor more.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The BT threads are interfering with the main thread priority selection
and the test fails semi-spuriously on NRF5x boards with "threads ran
too soon" (i.e. not an EDF failure per se, but the fact that the new
threads at K_LOWEST_APPLICATION_PRIO are running instead of the test
thread). This is a reasonable workaround for testing the
SCHED_DEADLINE ordering behavior, though.
Fixes#9843
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Simple test for CONFIG_SCHED_DEADLINE. It creates a bunch of threads
at randome deadlines but within the same priority, and validates that
they run in the correct order.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Building with !MULTITHREADING is designed for bootloaders and similar
minimal-functionality use cases. It's pathologically silly to combine
it with MMU drivers and address space partitioning, even though on
some architectures that technically works (on ARM, it seems not to).
The test intent was to disable this originally, but it turns out that
doesn't work. There is a TEST_USERSPACE kconfig symbol that also
needs to be explicitly turned off, otherwise it will reselect
USERSPACE against our wishes.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Fixes the gen_isr_table kernel test on mimxrt1050_evk by using data and
instruction synchronization barriers instead of disabling compiler
optimization on arm platforms. According to [1] section 4.5, "if a
pended interrupt request needs to be recognized immediately after being
enabled in the NVIC, add a DSB instruction and then an ISB instruction"
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dai0321a/BIHJDAAE.html
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This adds some test cases where the pipe buffer is smaller than
the size of data being pushed through the pipe.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For ARC MPU version 3, the defined partitions are not added to MPU
when appmem_init_app_memory is doning app_bss_zero().
So need to disable mpu first to allow appmem_init_app_memory to
access all partitions.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Add more stack for this test, it was failing and hidden by sanitycheck
(which needs to be fixed somewhere else).
Fixes#9664
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The stack size was way too less. Increasing the size to minimum
of 512 for all platforms.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Assisning system heap to the current thread.
And validate allocation and free memory from the same system
heap memory pool.
Signed-off-by: Ajay Kishore <ajay.kishore@intel.com>
irq_lock returns an unsigned int, though, several places was using
signed int. This commit fix this behaviour.
In order to avoid this error happens again, a coccinelle script was
added and can be used to check violations.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add testcase for validating poll events by manipultaing thread
state to improve code coverage. Also, add multiple threads to
wait on same event.
Signed-off-by: Praful Swarnakar <praful.swarnakar@intel.com>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This commit replaces exact time compassion by a range check, allowing
the tests to pass on platforms which needs rounding in __ticks_to_ms()
and _ms_to_ticks().
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The test read_kobject_user_pipe() is called twice in
the test suite. There is no need of calling same test
twice. Removing the extra call.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
This adds two test cases to create dynamic threads, and one test
case to make sure permissions are set correctly.
Origin: Original
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The kernel.queue.poll test fails if CONFIG_MAX_THREAD_BYTES is larger
than 2, complaining about no memory for semaphore object. Turns out
the memory pool is not large enough. So make it a bit larger.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add descriptions and doxygen groups for app_memory,
stack_protection, stack_randomization and
obj_validation.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
Test that we can define our own system calls in application code
and that fault handling works properly.
Additional tests for base system call infrastructure, outside of
specific system calls, go here.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Test to verify k_thread_user_mode_enter() when usermode is
not enabled or supported by architecture. The thread which calls
k_thread_user_mode_enter() with CONFIG_USERSPACE disabled or
architecture doesn't support usermode, should be marked
as usermode and if it is essential, then it has to be cleared.
This is added to improve code coverage.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
Move k_thread_foreach() API test from tests/kernel/profiling to
tests/kernel/threads/thread_apis.
Fixes#7966
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Summary: revised attempt at addressing issue 6290. The
following provides an alternative to using
CONFIG_APPLICATION_MEMORY by compartmentalizing data into
Memory Domains. Dependent on MPU limitations, supports
compartmentalized Memory Domains for 1...N logical
applications. This is considered an initial attempt at
designing flexible compartmentalized Memory Domains for
multiple logical applications and, with the provided python
script and edited CMakeLists.txt, provides support for power
of 2 aligned MPU architectures.
Overview: The current patch uses qualifiers to group data into
subsections. The qualifier usage allows for dynamic subsection
creation and affords the developer a large amount of flexibility
in the grouping, naming, and size of the resulting partitions and
domains that are built on these subsections. By additional macro
calls, functions are created that help calculate the size,
address, and permissions for the subsections and enable the
developer to control application data in specified partitions and
memory domains.
Background: Initial attempts focused on creating a single
section in the linker script that then contained internally
grouped variables/data to allow MPU/MMU alignment and protection.
This did not provide additional functionality beyond
CONFIG_APPLICATION_MEMORY as we were unable to reliably group
data or determine their grouping via exported linker symbols.
Thus, the resulting decision was made to dynamically create
subsections using the current qualifier method. An attempt to
group the data by object file was tested, but found that this
broke applications such as ztest where two object files are
created: ztest and main. This also creates an issue of grouping
the two object files together in the same memory domain while
also allowing for compartmenting other data among threads.
Because it is not possible to know a) the name of the partition
and thus the symbol in the linker, b) the size of all the data
in the subsection, nor c) the overall number of partitions
created by the developer, it was not feasible to align the
subsections at compile time without using dynamically generated
linker script for MPU architectures requiring power of 2
alignment.
In order to provide support for MPU architectures that require a
power of 2 alignment, a python script is run at build prior to
when linker_priv_stacks.cmd is generated. This script scans the
built object files for all possible partitions and the names given
to them. It then generates a linker file (app_smem.ld) that is
included in the main linker.ld file. This app_smem.ld allows the
compiler and linker to then create each subsection and align to
the next power of 2.
Usage:
- Requires: app_memory/app_memdomain.h .
- _app_dmem(id) marks a variable to be placed into a data
section for memory partition id.
- _app_bmem(id) marks a variable to be placed into a bss
section for memory partition id.
- These are seen in the linker.map as "data_smem_id" and
"data_smem_idb".
- To create a k_mem_partition, call the macro
app_mem_partition(part0) where "part0" is the name then used to
refer to that partition. This macro only creates a function and
necessary data structures for the later "initialization".
- To create a memory domain for the partition, the macro
app_mem_domain(dom0) is called where "dom0" is the name then
used for the memory domain.
- To initialize the partition (effectively adding the partition
to a linked list), init_part_part0() is called. This is followed
by init_app_memory(), which walks all partitions in the linked
list and calculates the sizes for each partition.
- Once the partition is initialized, the domain can be
initialized with init_domain_dom0(part0) which initializes the
domain with partition part0.
- After the domain has been initialized, the current thread
can be added using add_thread_dom0(k_current_get()).
- The code used in ztests ans kernel/init has been added under
a conditional #ifdef to isolate the code from other tests.
The userspace test CMakeLists.txt file has commands to insert
the CONFIG_APP_SHARED_MEM definition into the required build
targets.
Example:
/* create partition at top of file outside functions */
app_mem_partition(part0);
/* create domain */
app_mem_domain(dom0);
_app_dmem(dom0) int var1;
_app_bmem(dom0) static volatile int var2;
int main()
{
init_part_part0();
init_app_memory();
init_domain_dom0(part0);
add_thread_dom0(k_current_get());
...
}
- If multiple partitions are being created, a variadic
preprocessor macro can be used as provided in
app_macro_support.h:
FOR_EACH(app_mem_partition, part0, part1, part2);
or, for multiple domains, similarly:
FOR_EACH(app_mem_domain, dom0, dom1);
Similarly, the init_part_* can also be used in the macro:
FOR_EACH(init_part, part0, part1, part2);
Testing:
- This has been successfully tested on qemu_x86 and the
ARM frdm_k64f board. It compiles and builds power of 2
aligned subsections for the linker script on the 96b_carbon
boards. These power of 2 alignments have been checked by
hand and are viewable in the zephyr.map file that is
produced during build. However, due to a shortage of
available MPU regions on the 96b_carbon board, we are unable
to test this.
- When run on the 96b_carbon board, the test suite will
enter execution, but each individaul test will fail due to
an MPU FAULT. This is expected as the required number of
MPU regions exceeds the number allowed due to the static
allocation. As the MPU driver does not detect this issue,
the fault occurs because the data being accessed has been
placed outside the active MPU region.
- This now compiles successfully for the ARC boards
em_starterkit_em7d and em_starterkit_em7d_v22. However,
as we lack ARC hardware to run this build on, we are unable
to test this build.
Current known issues:
1) While the script and edited CMakeLists.txt creates the
ability to align to the next power of 2, this does not
address the shortage of available MPU regions on certain
devices (e.g. 96b_carbon). In testing the APB and PPB
regions were commented out.
2) checkpatch.pl lists several issues regarding the
following:
a) Complex macros. The FOR_EACH macros as defined in
app_macro_support.h are listed as complex macros needing
parentheses. Adding parentheses breaks their
functionality, and we have otherwise been unable to
resolve the reported error.
b) __aligned() preferred. The _app_dmem_pad() and
_app_bmem_pad() macros give warnings that __aligned()
is preferred. Prior iterations had this implementation,
which resulted in errors due to "complex macros".
c) Trailing semicolon. The macro init_part(name) has
a trailing semicolon as the semicolon is needed for the
inlined macro call that is generated when this macro
expands.
Update: updated to alternative CONFIG_APPLCATION_MEMORY.
Added config option CONFIG_APP_SHARED_MEM to enable a new section
app_smem to contain the shared memory component. This commit
seperates the Kconfig definition from the definition used for the
conditional code. The change is in response to changes in the
way the build system treats definitions. The python script used
to generate a linker script for app_smem was also midified to
simplify the alignment directives. A default linker script
app_smem.ld was added to remove the conditional includes dependency
on CONFIG_APP_SHARED_MEM. By addining the default linker script
the prebuild stages link properly prior to the python script running
Signed-off-by: Joshua Domagalski <jedomag@tycho.nsa.gov>
Signed-off-by: Shawn Mosley <smmosle@tycho.nsa.gov>
