This commit moves the documentation corresponding to
_ARCH_THREAD_STACK_DEFINE(..) macro to the right place.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This reverts commit 17e9d623b4.
Single thread keep introducing more issues, decided to remove the
feature completely and push any required changes for after 1.13.
See #9808
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some applications have a use case for a tiny MULTITHREADING=n build
(which lacks most of the kernel) but still want special-purpose
drivers in that mode that might need to handle interupts. This
creates a chicken and egg problem, as arch code (for obvious reasons)
runs _Cstart() with interrupts disabled, and enables them only on
switching into a newly created thread context. Zephyr does not have a
"turn interrupts on now, please" API at the architecture level.
So this creates one as an arch-specific wrapper around
_arch_irq_unlock(). It's implemented as an optional macro the arch
can define to enable this behavior, falling back to the previous
scheme (and printing a helpful message) if it doesn't find it defined.
Only ARM and x86 are enabled in this patch.
Fixes#8393
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Define generic interface and hooks for tracing to replace
kernel_event_logger and existing tracing facilities with something more
common.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit implements and integrates the ARMv8-M MPU driver
into the memory protection system for ARM.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit introduces a type definition for the ARM MPU
region attribute container. This allows to abstract the type
of the attribute container and make the code extendible for
ARMv8-M, where the size and structure of the attribute
container will be different.
Therefore, we can, now, move the definition of the region
data structure in the common arm_mpu.h header.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds K-config options that allow the user to
signify an ARM Secure Firmware that contains Secure Entry
functions and to define the starting address of the linker
section that will contain the Secure Entry functions. It
also instructs the linker to append the NSC section if
instructed so by the user.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Split out the arch specific syscall code to reduce include pollution
from other arch related headers. For example on ARM its possible to get
errno.h included via SoC specific headers. Which created an interesting
compile issue because of the order of syscall & errno/errno syscall
inclusion.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If MMU is enabled, always make the BSS section MMU page aligned.
According to the comments, it is always aligned anyway.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Some drivers or tests need to execute some code before Zephyr is
booted, dynamically register command line arguments, etc.
For this purpose, we generalize the NATIVE_EXIT_TASK to also
provide hooks to run a function at a given point during the startup
of native_posix.
Also, test/boards/native_posix/exit_tasks is generalized to cover
this new functionality.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The .eh_frame symbol was causing __data_rom_start to contain the wrong
offset into the ROM, resulting in corrupt data copied into RAM by
_data_copy(). Fix by placing the .eh_frame in the .text section as is
done in include/arch/x86/linker.ld
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
When building the real mode, the linker definition has to place
the real mode entry code at the start of flash area.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Summary: revised attempt at addressing issue 6290. The
following provides an alternative to using
CONFIG_APPLICATION_MEMORY by compartmentalizing data into
Memory Domains. Dependent on MPU limitations, supports
compartmentalized Memory Domains for 1...N logical
applications. This is considered an initial attempt at
designing flexible compartmentalized Memory Domains for
multiple logical applications and, with the provided python
script and edited CMakeLists.txt, provides support for power
of 2 aligned MPU architectures.
Overview: The current patch uses qualifiers to group data into
subsections. The qualifier usage allows for dynamic subsection
creation and affords the developer a large amount of flexibility
in the grouping, naming, and size of the resulting partitions and
domains that are built on these subsections. By additional macro
calls, functions are created that help calculate the size,
address, and permissions for the subsections and enable the
developer to control application data in specified partitions and
memory domains.
Background: Initial attempts focused on creating a single
section in the linker script that then contained internally
grouped variables/data to allow MPU/MMU alignment and protection.
This did not provide additional functionality beyond
CONFIG_APPLICATION_MEMORY as we were unable to reliably group
data or determine their grouping via exported linker symbols.
Thus, the resulting decision was made to dynamically create
subsections using the current qualifier method. An attempt to
group the data by object file was tested, but found that this
broke applications such as ztest where two object files are
created: ztest and main. This also creates an issue of grouping
the two object files together in the same memory domain while
also allowing for compartmenting other data among threads.
Because it is not possible to know a) the name of the partition
and thus the symbol in the linker, b) the size of all the data
in the subsection, nor c) the overall number of partitions
created by the developer, it was not feasible to align the
subsections at compile time without using dynamically generated
linker script for MPU architectures requiring power of 2
alignment.
In order to provide support for MPU architectures that require a
power of 2 alignment, a python script is run at build prior to
when linker_priv_stacks.cmd is generated. This script scans the
built object files for all possible partitions and the names given
to them. It then generates a linker file (app_smem.ld) that is
included in the main linker.ld file. This app_smem.ld allows the
compiler and linker to then create each subsection and align to
the next power of 2.
Usage:
- Requires: app_memory/app_memdomain.h .
- _app_dmem(id) marks a variable to be placed into a data
section for memory partition id.
- _app_bmem(id) marks a variable to be placed into a bss
section for memory partition id.
- These are seen in the linker.map as "data_smem_id" and
"data_smem_idb".
- To create a k_mem_partition, call the macro
app_mem_partition(part0) where "part0" is the name then used to
refer to that partition. This macro only creates a function and
necessary data structures for the later "initialization".
- To create a memory domain for the partition, the macro
app_mem_domain(dom0) is called where "dom0" is the name then
used for the memory domain.
- To initialize the partition (effectively adding the partition
to a linked list), init_part_part0() is called. This is followed
by init_app_memory(), which walks all partitions in the linked
list and calculates the sizes for each partition.
- Once the partition is initialized, the domain can be
initialized with init_domain_dom0(part0) which initializes the
domain with partition part0.
- After the domain has been initialized, the current thread
can be added using add_thread_dom0(k_current_get()).
- The code used in ztests ans kernel/init has been added under
a conditional #ifdef to isolate the code from other tests.
The userspace test CMakeLists.txt file has commands to insert
the CONFIG_APP_SHARED_MEM definition into the required build
targets.
Example:
/* create partition at top of file outside functions */
app_mem_partition(part0);
/* create domain */
app_mem_domain(dom0);
_app_dmem(dom0) int var1;
_app_bmem(dom0) static volatile int var2;
int main()
{
init_part_part0();
init_app_memory();
init_domain_dom0(part0);
add_thread_dom0(k_current_get());
...
}
- If multiple partitions are being created, a variadic
preprocessor macro can be used as provided in
app_macro_support.h:
FOR_EACH(app_mem_partition, part0, part1, part2);
or, for multiple domains, similarly:
FOR_EACH(app_mem_domain, dom0, dom1);
Similarly, the init_part_* can also be used in the macro:
FOR_EACH(init_part, part0, part1, part2);
Testing:
- This has been successfully tested on qemu_x86 and the
ARM frdm_k64f board. It compiles and builds power of 2
aligned subsections for the linker script on the 96b_carbon
boards. These power of 2 alignments have been checked by
hand and are viewable in the zephyr.map file that is
produced during build. However, due to a shortage of
available MPU regions on the 96b_carbon board, we are unable
to test this.
- When run on the 96b_carbon board, the test suite will
enter execution, but each individaul test will fail due to
an MPU FAULT. This is expected as the required number of
MPU regions exceeds the number allowed due to the static
allocation. As the MPU driver does not detect this issue,
the fault occurs because the data being accessed has been
placed outside the active MPU region.
- This now compiles successfully for the ARC boards
em_starterkit_em7d and em_starterkit_em7d_v22. However,
as we lack ARC hardware to run this build on, we are unable
to test this build.
Current known issues:
1) While the script and edited CMakeLists.txt creates the
ability to align to the next power of 2, this does not
address the shortage of available MPU regions on certain
devices (e.g. 96b_carbon). In testing the APB and PPB
regions were commented out.
2) checkpatch.pl lists several issues regarding the
following:
a) Complex macros. The FOR_EACH macros as defined in
app_macro_support.h are listed as complex macros needing
parentheses. Adding parentheses breaks their
functionality, and we have otherwise been unable to
resolve the reported error.
b) __aligned() preferred. The _app_dmem_pad() and
_app_bmem_pad() macros give warnings that __aligned()
is preferred. Prior iterations had this implementation,
which resulted in errors due to "complex macros".
c) Trailing semicolon. The macro init_part(name) has
a trailing semicolon as the semicolon is needed for the
inlined macro call that is generated when this macro
expands.
Update: updated to alternative CONFIG_APPLCATION_MEMORY.
Added config option CONFIG_APP_SHARED_MEM to enable a new section
app_smem to contain the shared memory component. This commit
seperates the Kconfig definition from the definition used for the
conditional code. The change is in response to changes in the
way the build system treats definitions. The python script used
to generate a linker script for app_smem was also midified to
simplify the alignment directives. A default linker script
app_smem.ld was added to remove the conditional includes dependency
on CONFIG_APP_SHARED_MEM. By addining the default linker script
the prebuild stages link properly prior to the python script running
Signed-off-by: Joshua Domagalski <jedomag@tycho.nsa.gov>
Signed-off-by: Shawn Mosley <smmosle@tycho.nsa.gov>
This commit adds the implementation that allows the ARM CPU
to recover from (otherwise fatal) MPU faults. A new error
reason, _NANO_ERR_RECOVERABLE, is introduced. The error
reason is used to suppress fault dump information, if the
error is actually recoverable.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Shouldn't declare this and then pull in headers, fixes
error like "util.h:41:1: error: template with C linkage"
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Shouldn't declare this and then pull in headers, fixes
errors like "util.h:41:1: error: template with C linkage"
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some of the native application components or drivers need to
do a proper cleanup before the executable exits.
So we provide a macro similar to SYS_INIT but which will be
called just before exiting.
This can be used for freeing up resources, closing descriptors,
or doing any neccessary signaling to any other host process.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Change the REGION_FLASH_ATTR macros to set the cache attributes on Flash
regions to "Outer and inner write-through. No write allocate.". This
matches the cache attributes used when the MPU is disabled.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Change the REGION_RAM_ATTR macro to set the cache attributes on RAM
regions to "Outer and inner write-back. Write and read allocate". This
matches the cache attributes used when the MPU is disabled.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix NORMAL_OUTER_INNER_WRITE_BACK_WRITE_READ_ALLOCATE_NONSHAREABLE, the
bufferable bit should be set, while the shareable one should not be set.
At the same time, rename it from ..._NONSHAREABLE to _NON_SHAREABLE to
keep the same naming convention for all macro. Given it's not (yet)
used, it should not be an issue.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reduces the number of mpu regions statically reserved at boot time by
one, giving a total of five. We originally sought to reduce the total to
three: 1 background region with lowest precendence for supervisor r/w, 1
flash region, and 1 sram region. However, the nxp mpu hardware does not
give precedence to any region over another, and thus we cannot revoke
access from the background region with a higher priority region. This
means we cannot support hardware stack protection with a single
background region.
Instead, create two background regions that cover the entire address
space, except for sram.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fix the title comment in the linker.ld script for ARM, to
make it clear that this is the common linker script for all
Cortex-M based platforms.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit re-defines the REGION_SIZE_<x> macros, present in
include/arch/arm/cortex_m/mpu/arm_mpu_v7m.h, with the help of
the existing ARM MPU regions size definitions in ARM CMSIS.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit refactors internal functions in arm_mpu.c to use
bitsets and functions taken directly from ARM CMSIS instead of
hardcoded arithmetic literals. In several internal functions
some part of the implementation is abstracted further in inline
functions or convenience macros, to facilitate extending the
arm_mpu.c for ARMv8-M. In addition, the commit adds minor
improvements in internal function documentation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit moves the macro definitions and convenience wrappers
for ARM MPU that are specific to ARMv6-m, and ARMv7-m to an
arch-specific MPU header file. It leaves only the generic
content in arm_mpu.h, i.e. the content that is supposed to
be common for ARMv8-M MPU.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit modifies the interal macro defitions for MPU region
attributes in arm_mpu.h to use bitset flags directly from CMSIS.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes the redundant HAL definition for the ARM
Cortex-M MPU registers, and modifies the ARM MPU driver
implementation to directly use the provided HAL from CMSIS.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The entry point can and therefore should be set by linker
scripts. Whenever possible one should express things in the source
language, be it .c or .ld, and not in code generators or in the build
system.
This patch removes the flag -eCONFIG_KERNEL_ENTRY from the linker's
command line and replaces it with the linker script command
ENTRY(CONFIG_KERNEL_ENTRY)
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This is a public macro which calculates the size to be allocated for
stacks inside a stack array. This is necessitated because of some
internal padding (e.g. for MPU scenarios). This is particularly
useful when a reference to K_THREAD_STACK_ARRAY_DEFINE needs to be
made from within a struct.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
* We are now *much* better at not reserving unnecessary
system MPU regions based on configuration. The #defines
for intent are now an enumerated type. As a bonus, the
implementation of _get_region_index_by_type() is much
simpler. Previously we were wasting regions for stack guard
and application memory if they were not configured.
* NXP MPU doesn't reserve the last region if HW stack
protection isn't enabled.
* Certain parts of the MPU code are now properly ifdef'd
based on configuration.
* THREAD_STACK_REGION and THREAD_STACK_USER_REGION was a
confusing construction and has now been replaced with
just THREAD_STACK_REGION, which represents the MPU region
for a user mode thread stack. Supervisor mode stacks
do not require an MPU region.
* The bounds of CONFIG_APPLICATION_MEMORY never changes
and we just do it once during initialization instead of
every context switch.
* Assertions have been added to catch out-of-bounds cases.
Fixes: #7384
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
intList has been populated with the number of isrs, aka interrupts,
but nothing has not been using this information so we drop it and
everything used to construct it.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This commit includes the arch/arm/cortex_m/cmsis.h directly
in arm_mpu.h. This is requires as arm_mpu.h uses CMSIS macro
defines directly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
All architecture defines OCTET_TO_SIZEOFUNIT and SIZEOFUNIT_TO_OCTET
as identity functions. But the only user is tests/benchmarks/app_kernel.
It's effectively a no-op. Remove them.
Signed-off-by: Yasushi SHOJI <y-shoji@ispace-inc.com>
Set Zero Latency IRQ to priority level zero and SVCs to priority level
one when Zero Latency IRQ is enabled.
This makes Zero Zatency truly zero latency when the kernel has been
configured with userspace enabled, or when IRQ offloading is used.
Exceptions can still delay Zero Latency IRQ, but this is considered
ok since exceptions indicate a serious error, and the system needs to
recover.
Fixes: #7869
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit moves code from fe310 platform into RISC-V privilege common
folder. This way the code can be reused by other platforms in future.
signed-off-by: Karol Gugala <kgugala@antmicro.com>
This commit removes the macro definitions for MPU_RASR register
bitmasks, defined in arm_mpu.h, and modifies the MPU driver to
directly use the equivalent macros defined in ARM CMSIS.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes the macro definitions for MPU_RBAR register
bitmasks, defined in arm_mpu.h, and modifies the MPU driver to
directly use the equivalent macros defined in ARM CMSIS.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes the macro definitions for MPU_CTRL register
bitmasks, defined in arm_mpu.h, and modifies the MPU driver to
directly use the equivalent macros defined in ARM CMSIS.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
* the original stack check codes have no consideration
for userspace case. This will wrong cause possible stack
check exception.
* this commit refactors the arc stack check support to
support the usperspace.
* this commit fixes#7885. All the failed tests in #7885
are run again to verify this commit. The test results are ok
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Previously, the stack buffer array wasn't being page-aligned.
If private kernel data was stored after the stack buffer in
the same page, the current thread would incorrectly have
access to it. Round stack sizes up on x86 to prevent this
problem.
Fixes#8118
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The r7 register is used as a frame pointer on ARM Thumb. As result, it
cannot be modified by the assembly code in functions using stack frame.
This commit replaces r7 by r8, which is a general purpose register.
Also it fixes#7704.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Change the zero latency interrupt priority level from 2 to 1.
This is the priority level that the kernel has reserved for the
zero latency IRQ feature by the _IRQ_PRIO_OFFSET constant.
The zero latency IRQ will now not be masked by the irq_lock function.
Update comments to reflect the priority levels reserved by the kernel.
Fixes: #8073
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Because the address alignment of MPUv2, the address should
not only be aligned at the start but also for the array member.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This commit removes a redundant #ifdef check for
CONFIG_CPU_CORTEX_M_HAS_BASEPRI, which is covered
CONFIG_CPU_CORTEX_M_HAS_PROGRAMMABLE_FAULT_PRIOS, present
in the same ifdef check.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
CONFIG_UART_NSIM depends on CONFIG_NSIM, which was removed in commit
9bc69a46fa ("boards: Update arc em_starterkit support from 2.2 to
2.3"). Remove the dependency, and also remove the CONFIG_NSIM=y setting
from the test_nsim test (which should now work).
Also change the condition for EXTERN()ing _VectorTable in
include/arch/arc/v2/linker.ld to check CONFIG_UART_NSIM instead of
CONFIG_NSIM. I'm guessing the EXTERN() is there to make the symbol
visible to nSIM, though I don't know anything about it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
