Add the pm_control fn to the dummy_driver so the full PM API is tested.
This change also bypasses all PM APIs if the device driver doesn't
support PM.
Signed-off-by: Keith Short <keithshort@google.com>
The test is using device and device runtime power management. Just
including them to the test build.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
There are quite a few symbols which are needed before the paging
mechanism is initialized. So they need to be pinned in memory
to prevent page fault early in the boot process.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The verb tense for the suspended state was not consistent with other
states. The likely reason: state was being used as a command/action.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Busy check APIs now return boolean type. Due to that change, the
function names have also been adjusted. The common name pattern for
boolean check type APIs is "PREFIX_is_CONDITION". For example,
"pm_device_is_busy". pm_device_busy_check has been renamed to
pm_device_is_busy and pm_device_any_busy_check to pm_device_is_any_busy.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The test_dummy_device test has nothing to do with device busy testing,
so remove the calls to pm_device_busy_set/pm_device_busy_clear.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The following device busy APIs:
- device_busy_set()
- device_busy_clear()
- device_busy_check()
- device_any_busy_check()
were used for device PM, so they have been moved to the pm subsystem.
This means they are now prefixed with `pm_` and are defined in
`pm/device.h`.
If device PM is not enabled dummy functions are now provided that do
nothing or return `-ENOSYS`, meaning that the functionality is not
available.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
We excluded the beaglev_starlight_jh7100 from this test but only did
the kernel.device.pm test. We should have excluded the platform
from both tests.
The beaglev_starlight_jh7100 uses a full 64-bit devicetree map
which uses #{address/size}-cells = 2. The device test expects
that #{address/size}-cells = 1 so exclude beaglev_starlight_jh7100
from the test.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The callback is not used anymore, so just delete it from the pm_control
callback signature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The type used by device PM state was not changed to the recently
introduced enum type. The state is also initialized to a value distinct
from the first expected value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move all PM_DEVICE_STATE_* definitions to an enum. The
PM_DEVICE_STATE_SET and PM_DEVICE_STATE_GET definitions have been kept
out of the enum since they do not represent any state. However, their
name has not been changed since they will be removed soon.
All drivers and tests have been adjusted accordingly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The beaglev_starlight_jh7100 uses a full 64-bit devicetree map
which uses #{address/size}-cells = 2. The device test expects
that #{address/size}-cells = 1 so exclude beaglev_starlight_jh7100
from the test.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Use `pm_device_*` prefix for the device runtime PM API. This adds the
API to the `pm` namespace, making it clear part of the PM subsystem.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- If device PM is not supported -ENOSYS is returned, update test case to
account for that
- Remove usage of device_pm_control_nop
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
There was a linker script change the broke the sorting such that
priority 2 and 20 would not necessary get sorted correctly. Modify
the test to try and catch any such issues in the future.
We modify the DEVICE_DEFINE of the larger priority first, so if the
linker isn't sorting it would get linked first in theory, and we also
tweak the priority value from 4 to 20 so if we aren't sorting correctly
between 2 and 20 we'll catch that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Exclude the test_null_dynamic_name test-suite from running the
test, in Non-Secure mode (Cortex-M), because passing a NULL
device name de-references memory at 0x0 which is likely to
cause a SecureFault and crash the kernel.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
1. Add a null dynamic name testing for device_get_binding().
2. Add a driver which initialization failed in SYS_INIT.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Convert tests to DEVICE_{DT_}DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update pm test case to fix some error last time submission. Add test
case that simply check device_pm_enable and device_pm_disable interface.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is nothing wrong with instance numbers and they are
recommended for use whenever possible, but this is an API
design problem because it's not always possible to get nodes
by instance number; in some cases, drivers need to get node
identifiers from node labels, for example.
Change these APIs (which are not yet in any Zephyr release)
to take node IDs instead of instance IDs.
Fixes: #26984
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Exercise the public macros as well as device_map().
This test has a whitelist for whatever reason; add
mps2_an385 so that the !DEVICE_MMIO_IS_IN_RAM stuff
is tested.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Device objects in Zephyr are currently placed into an array by linker
scripts, making it easy to iterate over all devices if the array
address and size can be obtained. This has applications in device
power management, but the existing API for this was available only
when that feature was enabled. It also uses a signed type to hold the
device count.
Provide a new API that is generally available, but marked as internal
since normally applications should not iterate over all devices. Mark
the PM API approach deprecated.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
The dummy driver never implemented device power management, so the
fact the not-implemented stub returned success was a false negative.
Verify the expected behavior now, leaving the test code in place for
when somebody provides a non-trivial PM control function.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Tests should always start with test_, otherwise detection of subtests
will not work through sanitycheck.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Device initialization may require use of generic services such as
starting up power rails, some of which may be controlled by GPIOs on
an external controller that can't be used until full kernel services
are available. Generic services can check k_is_in_isr() and mediate
their behavior that way, but currently have no way to determine that
the kernel is not available.
Provide a function that indicates whether initialization is still in
pre-kernel stages where no kernel services are available.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
