The worst-case maximum number of CCC entries we need is actually
MAX_CONN + MAX_PAIRED. Provide a helper define for it and use it
whenever appropriate.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Locking interrupts for a long duration is in general bad design, and
is particularly bad for the controller which depends on low latency
interrupts. Instead of using interrupt locking introduce a new flag to
track the shared buffer usage and simply drop characters if the flag
is set.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This doesn't make much practical difference, however it should resolve
Coverity CIDs 170740 and 170748.
Jira: ZEP-2343
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In some cases applications may want better control of advertising
instead of the stack doing automated re-enablement. Introduce a new
option that can be used to do more "manual" advertising control.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The BT_DEV_ADVERTISING flag already does a suffient job with tracking
the actual advertising state, so there's no need for bt_le_adv_stop()
to return an error if KEEP_ADVERTISING is set. We still need to clear
KEEP_ADVERTISING, but it should not be considered an error if it was
not set.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move the PRNG initialization after reading local supported commands,
so that we don't send HCI_LE_Rand if the controller doesn't support it
(we still need to fail the init however). The patch also removes a few
unnecessary #ifdefs related to crypto.h.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It's possible that the controller will emit the number of completed
packets event before bt_send() returns, or possibly preempt
send_frag() before it manages to call add_pending_tx(). We have to
therefore add the pending TX entry before calling bt_send().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Rename bt_gatt_unregister_service to bt_gatt_service_unregister to be
consistent with other APIs such as bt_gatt_service_register.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This initial commit adds the following:
* Handling of privacy HCI commands
* New Link Layer filter module for both whitelist and resolving list
* Advertising RPA generation with timeouts
Follow-up commits will expand the functionality.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Enforce the logical dependency between SMP, RPA generation and privacy
in the Kconfig files for the Bluetooth subsysem.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Moving the net_buf_pool objects to a dedicated area lets us access
them by array offset into this area instead of directly by pointer.
This helps reduce the size of net_buf objects by 4 bytes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With the introduction of Service Changed support it is now possible to
unregister services at runtime.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_gatt_register_service using bt_gatt_service which contains
the attribute array that is then added to the database saving a pointer
in each and every attribute declared.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
GATT is mandatory service and now that the db can only be build
dynamically there is no reason to keep the applications registering it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
GAP is mandatory service and now that the db can only be build
dynamically there is no reason to keep the applications registering it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes applications able to select the value used for the
GAP appearance attribute.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Removes CONFIG_BLUETOOTH_GATT_DYNAMIC_DB in preparation to the
introduction of bt_gatt_unregister.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In certain cases a response may happen even before number of complete
packets is generated by the controller:
[bt] [DBG] att_req_destroy: (0x0011cfe0) req 0x0011daa0
[bt] [DBG] att_process: (0x0011cfe0)
[bt] [DBG] att_req_sent: (0x0011d780) conn 0x0011d820 att 0x0011d9a0
att->req 0x00000000
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It's mandatory to set chan->ops so explicit checks for it are
redundant. What's worse, inconsistent checking for this triggers
static code analyzer warnings. This patch fixes Coverity CID 151984.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
buf->len should be validated before accessing it since remote can
send invalid frame_len which can result in out of bound memory
access.
This also fix the len check wrt cstate, since current check is
not considering the cstate length size and frame_len size.
Jira: ZEP-2110
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
In order to properly queue request there need to be a bt_att_req
storage but none of the calls to gatt_write_ccc were using the params
causing gatt_send to use bt_att_send and not bt_att_req_send.
To fix this now all the callers of gatt_write_ccc do set the params
properly but this means that bt_gatt_unsubscribe has to wait for it
to be completed before the application can reuse the
bt_gatt_subscribe_params.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For some write requests, such as CCC, the code doesn't use an ATT
request context but we still need to clear the request timeout when
the response comes. Move the k_delayed_work_cancel() call to the right
place and add some debug logs that helped pinpoint this issue.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The msgtype value is created using 'hdr & 3' which means that the
resulting value can never be greater than 3. This fixes Coverity CID
166771.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Added implementation to auto-update LE Data Length to max.
Tx octets supported by the local and peer controllers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Since the PHY update complete event can be generated due to the
procedure being initiated by the peer, use a flag to
differentiate between local auto update initiated on connection
complete versus peer initiated anytime in the connection. This
is necessary to avoid repeated initiation of auto-update
procedures intended only to be issued on connection complete.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
To better debug the flow of events into the Host, log the subevent code
whenever processing an LE Meta Event.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When required Rx MTU is less than configured Rx MPS, the
resultant initial credits was 0 which prevented any L2CAP
packet to be received.
Fixed by ceiling the initial credits count in the credits
calculation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Since more and more code is going to be reused by both the Host and the
Controller, this commit introduces a common/ folder that will contain
everything that is not tied to one of the two components but shared by
them.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Added implementation to auto-update Bluetooth PHY to 2Mbps
if the local Controller supports it.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added HCI macros to check LE Features. Also, added test
macros for 2M and Coded PHY support in HCI Controller.
Earlier a common test macro was used between BR/EDR and LE,
but since LE features do not use pages for feature, an
explicit macro for testing LE feature is added now.
Also, features field in LE device structure is now a single
dimension array of 8 octets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The APIs for allocating RX buffers were modified recently and hci_raw
had not reflected those changes properly.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The event mask population used to let the Controller know which events
are relevant to the Host needs to take into account the features
supported by the Controller itself, in order to only enable those that
are indeed valid.
Jira: ZEP-2050
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since Controller to Host flow control is a feature that affects both
sides equally, move it to the top-level Kconfig file and consolidate its
use in both Controller and Host.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This feature was removed some time ago, but turns out it's important
to have it available for split host-controller setups.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In order to achieve proper sharing of configuration options, everything
that is common to both the Host and the Controller should now be placed
in the top-level Kconfig file, and Controller-only options are in the
controller/ Kconfig one.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This ensures that an unknown request won't cause ATT to timeout since
no response is currently generated.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix the attr->handler reference to attr->handle.
Change-Id: I4a6ccee7860abf800f51df404979eac18eb26e8e
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Rename occurences of bt_hci_ev_* to more widely used
bt_hci_evt_* namespace.
Change-id: I742fb86f8f835a0f6072638e1e997ad08891d43d
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
L2CAP Dynamic Channel feature uses the global connection Tx
pool for segmentation either when there is no free buffers
in the original application pool or when the original data
buffer has no headroom to add L2CAP headers.
This eliminates the need for a dedicated fallback pool for
Dynamic Channel segmentation.
Change-id: Ia5452c814169d17ef261ecef425a8fcf2e7e1e84
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
This function already has an 'i' variable on the top-level, so no need
to declare a second one that'd just shadow the original.
Change-Id: I5dfa4df2c4793be220a40ac642b19bf440e80220
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
