Add a new option to control usage of DT nodelabel board_power. This
option also allows to select GPIO when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add options to control the behavior of sw0/sw1. These options also allow
to select GPIO when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add Devicetree overlay for sample drivers/led/pwm and fix the one in
basic/blinky_pwm for nucleo_l4r5zi board to set appropriate to enable
pwdleds and set appropriate timer prescaler.
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
The Adafruit QT Py ESP32-S3 needs to have GPIO hogs enabled in order to
use the onboard RBG LED with the led_strip sample code.
Signed-off-by: Ian Wakely <raveious.irw@gmail.com>
Do hflipping at camera level to avoid using PxP which impacts camera
framerates on RT10xx. Moreover, on RT11xx, PxP is already reserved
for 90 CCW image rotation.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Add an option to mirror the video image horizontally. This helps
to avoid doing so at the post-processing step by using additional
HW such as PxP on i.MX RT platforms.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Make APP_CPU board name auto generated and remove the related config.
Remove the boards overlay and replace with a socs overlays.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
This PR fixes a blocking call to video_buffer_alloc in case of memory
shortage by addign a timeout parameter to the API.
Signed-off-by: Armin Kessler <ake@espros.com>
Commit 55d9d1c6ba
("samples: led: consolidate LED samples under same directory")
moved the led_strip sample from samples/drivers to samples/drivers/led.
But commit f54a53b4b3
("drivers: ws2812_gpio: Make timing configurable and less hardware
dependend") was merged at the same time and added the bbc_microbit.conf
file to the old location.
This patch moves bbc_microbit.conf to its correct location.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
It is no longer needed to enable a specific flash driver in the sample
configuration. An appropriate driver (together with its dependecies,
like the SPI bus) for a given target will be enabled automatically
based on what is enabled in DTS.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
It is no longer needed to enable a specific flash driver in the sample
configuration. An appropriate driver (together with its dependencies,
like the SPI bus) for a given target will be enabled automatically
based on what is enabled in DTS.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Correct "zephyr,sram" property under /chosen node to make board and samples
compatible with new SoC memory description.
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
Signal-to-noise ratio is a unitless quantity, so its unit is dB, not
dBm (dBm is the power relative to 1 milliwatt). At the same time output
the received payload using `LOG_HEXDUMP_INF`, instead of limiting the
sample solely to string payloads.
Fixes#82414
Signed-off-by: Jordan Yates <jordan@embeint.com>
Convert them to native YAML lists. Support for space-separated
lists was deprecated in Twister a long time ago.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Change `GPIO39` to `GPIO38` in overlay.
The esp32s3_devkitc rgb led is connected to GPIO38, not 39.
Tested change on board and verified to function as intended.
Signed-off-by: david burke <david@aheng.io>
This uses Linux V4L2 controls as a reference to give names to the
CIDs. Apply the renaming down to the drivers that use them.
Signed-off-by: Josuah Demangeon <me@josuah.net>
add display type for fixtures to avoid conflcts
in NXP platform
1. add required regex for console harness.
2. add message after processing, ensure the flow is OK
3. reduce the test time in TEST mode
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Add a simple demonstration of the led_write_channels api on the lp5569
driver sample.
The demonstration simply turns on all of the channels with a single call to
led_write_channels. Then the same is done for turning off the channels.
Thus, it doesn't add much visually, but it shows the usage of the api.
Signed-off-by: Emil Dahl Juhl <emdj@bang-olufsen.dk>
This PR adds arduino giga r1 overlay in the dac sample.
Arduino Giga R1 has a 3.5mm audio jack connected to the
dac.
Signed-off-by: Mario Paja <mariopaja@hotmail.com>
The nRF54L05 and nRF54L10 are identical to the nRF54L15 except for their
memory sizes. Add support for emulating those ICs on the nRF54L15DK.
This commit only adds support for the main application core. Support for
the FLPR core may be added later.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
A valid device tree configuration is provided for the ADCs of the 8 input
channels and the sample adc_dt works out of the box. Obviously this is
not the only possible configuration but it provides a good template for
further customization without the need to lookup the ADC GPIOs and
connections in the schematics.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
Add `hifive_unmatched//s7` (earlier selected by default, using
`hifive_unmatched`) and `hifive_unmatched//u74` targets.
Define work-area for other 4 cores in openocd.cfg
Update twister platform white/black lists, to support new targets
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add `hifive_unleashed//e51` (earlier selected by default, using
`hifive_unleashed`) and `hifive_unleashed//u54` targets.
Define work-area for other 4 cores in openocd.cfg
Update twister platform white/black lists, to support new targets
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
ARGB8888 values all had alpha '0x00' (=transparent).
Changed them to '0xFF' and added a transparency test patch in the middle
of the screen.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
The newly introduced `frame_incomplete` flag of
`display_buffer_descriptor` needed to be added at several places to
avoid uninitialized memory.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
Updates and fixes to support IPM sample on ESP32:
- fix IPM sample code for APPCPU and PROCPU
- align with memory layout, add flash awarenes
- shell commands to stop/start APPCPU
- reorganize overlays
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Twister's extra arguments feature only works correctly if the fully
qualified platform name is given, which was not the case. Make all
platform names for the shield testcase fully qualified to resolve this.
Fixes#80876
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
LPC54114 does not define arduino_header nodelabel, so it cannot be
supported by the shield test within the display sample. Replace with
mimxrt1010_evk, which is supported.
Fixes#80876
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Led blinking period was made configurable and time unit changed
from sec to msec recently in the source code of the sample.
Console harness regex was not changed accordingly in sample.yaml.
Device testing fails when run with twister.
Change the regex to accept any period and change the units to msec.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
The default frame rate is printed as a floating point number. Without
enabling CONFIG_REQUIRES_FLOAT_PRINTF, it is not printed at all. Fix it.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
In preparation of adding a check for dead references, this commit fixes
currently broken zehpyr_file: links.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Without this, check_compliance.py suggests to run clang-format on the
changed code lines.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This change extends what e1e19732bc
(samples: drivers: crypto: Aligned AES key) has started: For certain
architectures (i.e. Si32), the alignment of the used buffers is
important as the AES HW engine uses DMA and inherits its restrictions.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Commit e1e19732bc (samples: drivers:
crypto: Aligned AES key) introduced the alignment for the key. According
to the commit message, the intention was to align the variable at 32 bit
boundaries. For this reason, passing 32 to __aligned seems like an
error, as its argument is denoted in byte and not bits.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
